CRUTCHFIELD Metra 120 70-9500 Receiver Wiring Adapter Owner’s Manual
- June 3, 2024
- CRUTCHFIELD
Table of Contents
CRUTCHFIELD Metra 120 70-9500 Receiver Wiring Adapter
IMPORTANT: Before starting, compare items on your invoice with items received. Thoroughly check packing materials. If an item is missing, please call Crutchfield at 1-888-955-6000.
MATCH & CONNECT WIRES
- Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your new receiver may, or may not, match the wire colors of the adapter. Match adapter and receiver wires by function, disregarding color.
- Individually tape off any unused wires.
- Make final wiring connections following instructions on the next page.
IMPORTANT: Splice these wires in the factory harness to receiver ground or to the vehicle chassis to prevent triggering the factory alarm system
- 2002-’08 Jaguar X-Type – Red wire in pin #3 of 20-pin connector
- 2003-’08 Jaguar S-Type – Black/Green wire in pin #3 of 20-pin connector
CRIMP CONNECTIONS
Tools & Parts Required
- Strip wires back 1/2”.
- Twist wires together and insert in crimp cap.
- Squeeze middle of cap for tight connection.
- Complete crimp connections for all necessary wires.
- Be sure to wrap any wires from the Wiring Adapter that are not necessary (wires with no match from the new receiver) with electrical tape.
APPLICATION
- When ready to install the receiver, plug the Wiring Adapter from the new receiver or receiver assembly into the factory radio harness(es) in the vehicle dash.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>