SANUS WSSE11 Speaker Stand Instruction Manual

September 15, 2024
SANUS

SANUS-Logo

SANUS WSSE11 Speaker Stand

SANUS-WSSE11-Speaker-Stand-fig-1

Product Information

Specifications:

  • Product Model: WSSE11 / WSSE12
  • Product Type: Speaker Stand
  • Speaker Weight Limit: 5 lbs. (2.2 kg)
  • Tool Needed: Screwdriver

Product Usage Instructions

Before Assembly:
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts.

Assembly Steps
  • Step 1: Slide Collars onto Tube
    Slide Top Collar (02) and Bottom Collar (03) onto the Tube (01).

  • Step 2: Attach Base to Tube
    Attach the Base (04) to the Tube (01) using Base Assembly Screw (05) and Lock Washer (06).

  • Step 3: Route Speaker Power Cable
    Route the Speaker Power Cable through the Tube (01) and Base (04).

  • Step 4: Install Rubber Pads -or- Carpet Spikes
    Twist Rubber Pads (07) into the Base (04). Optional Carpet Spikes (08) can be used instead of Rubber Pads.

  • Step 5: Attach Top Bracket
    Attach the Top Bracket (10) using Top Bracket Screw (11).

  • Step 6: Install Speaker Bracket
    Install the Speaker Bracket (12) using Speaker Screw (13) and Jam Nut (09).

  • Step 7: Attach Speaker
    Attach the Speaker to the Speaker Bracket using Securement Screw (14).

  • Step 8: Adjust Cables
    If necessary, adjust and organize the cables for a neat setup.

  • Step 9: Position Collars
    Position the Collars (02, 03) on the Tube (01) as needed for your speaker.
    Enjoy your setup!

FAQ

  • What is the weight limit for the speakers on this stand?
    The weight limit for speakers on this stand is 5 lbs. (2.2 kg).

  • Can I use carpet spikes instead of rubber pads?
    Yes, you can use optional Carpet Spikes (08) instead of Rubber Pads (07), but be cautious as the ends of Carpet Spikes are sharp and may scratch flooring.

IMPORTANT SAFETY INSTRUCTIONS

— PLEASE READ ENTIRE MANUAL PRIOR TO USE — SAVE THESE INSTRUCTIONS
Before getting started, let’s make sure this product is perfect for you!
This stand is designed to support only Sonos® Era 100™ speakers.

CAUTION: Avoid potential personal injuries and property damage!

  • Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
  • Please read through these instructions completely to be sure you’re comfortable with this easy install process.
  • Do not use this product for any purpose not explicitly specified by manufacturer.
  • Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
  • If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at US: +1 800-359-5520 • EMEA: +31 (0) 495 580 852 • UK: +44 (0) 800 056 2853.

Tool Needed

Dimensions

SANUS-WSSE11-Speaker-Stand-fig-3

Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.

SANUS-WSSE11-Speaker-Stand-fig-4 SANUS-WSSE11
-Speaker-Stand-fig-5

Assembly Instruction

  • STEP 1 Slide Collars onto Tube

SANUS-WSSE11-Speaker-Stand-fig-6

  • STEP 2 Attach Base to Tube

SANUS-WSSE11-Speaker-Stand-fig-7

  • STEP 3 Route Speaker Power Cable

SANUS-WSSE11-Speaker-Stand-fig-8

  • STEP 4 Install Rubber Pads -or- Carpet Spikes

SANUS-WSSE11-Speaker-Stand-fig-9

  • STEP 5 Attach Top Bracket

SANUS-WSSE11-Speaker-Stand-fig-10

  • STEP 6 Install Speaker Bracket

SANUS-WSSE11-Speaker-Stand-fig-11

  • STEP 7 Attach Speaker

SANUS-WSSE11-Speaker-Stand-fig-12

  • STEP 8 Adjust Cables

SANUS-WSSE11-Speaker-Stand-fig-13

  • STEP 9 Position Collars

SANUS-WSSE11-Speaker-Stand-fig-14

  • **enjoy

**SANUS-WSSE11-Speaker-Stand-fig-15

ABOUT COMPANY

  • Legrand AV Inc.

    • 6436 City West Parkway Eden Prairie, MN 55344 USA
    • US: +1 800-359-5520
  • Legrand AV Netherlands B.V. Franklinstraat 14

    • 6003 DK Weert Netherlands
    • UK: +44 (0) 800 056 2853
    • EMEA: +31 (0) 495 580 852
  • Authorized Representative for the UK

    • Starline Holding Technology Ltd. Unit C Island Road
    • Reading RG2 0RP UK
  • We’ll Make It Stress-Free
    If you have any questions along the way, just give us a call.

    • US: +1 800-359-5520
    • EMEA: +31 (0) 495 580 852
    • UK: +44 (0) 800 056 2853 We’re ready to help!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals