Liene ZPP110 Pearl K100 Portable Photo Printer User Manual

Liene ZPP110 Pearl K100 Portable Photo Printer

Product overview

Tip: When the machine is halted, press the reset button with a pin to forcibly shut down.

Load photo paper

Open printer cassette cover

Firmly press the cassette cover to hear a Click sound. The cassette cover is in place.

Load mono paper or ZINK paper  as needed

1. Load mono paper
   Unpack the paper and place the entire pack into the printer, making sure the glossy side of the paper is upward.

2. Load ZINK paper
   Unpack the paper and load the entire pack into the printer, making sure that the Smart Sheet is at the bottom and that the barcode is bottommost and the glossy side of the paper is upward.
   Note: The Smart Sheet must be placed at the bottom.

3. Close cassette cover

Usage

1. Power on
   Press and hold the power button for 3 seconds to turn on the printer. The printer status light is on in white, then turns to orange blink, waiting for connection with the phone.

2. Connect liene photo app

3. Search “Liene Photo” in ios app store or google play, or scan the qr code below to download and install “liene photo” App.

4. Open Liene Photo app home page, click “+”, or click the “Switch printer” icon on the top left corner, select “+”, and add devices according to the App prompt.
   Tip : Due to the upgrade and update of the Liene Photo App, the actual operation may be slightly different from the above description, please follow the current guidelines in the App. Once the printer is successfully connected to your phone, you can print photos through the Liene Photo App.

Instruction for buttons

Tip: In the firmware upgrade status, the upgrade will not be interrupted if you press and release or press and hold the power button.To save battery power, the printer will automatically shut down after 10 minutes or more of standby.

Battery level indicator

• Orange light on
  • Low battery level
• White light on
  • Charging
• Light off
  • Battery is sufficient/Fully  charged

Status indicator

• Light off
  • Power off
• White light on
  • Standby
• Orange light blink
  • Connect Bluetooth
• White light blink
  • Printing /  Firmware upgrade
• Orange light on
  • Printer failure
• White and orange are on for 1 second respectively
  • Restore factory  settings

Troubleshooting

The Liene app will alert you to various error conditions through in-app messaging. Follow the app instructions to resolve issues. For additional help on specific issues with your Liene photo printer, see the FAQs on global .liene-life.com.  

Warranty & Support

Thank you for choosing Liene! We really hope you will enjoy the product! Your satisfaction means everything to us!
Liene provides a 1-year warranty for this product, please contact us immediately if you encounter any of the following, and we will supply a replacement or refund.

1. Receiving defective items.
2. Short packaging.
3. Parts are broken in transit.
4. Item stops working within warranty.
5. Wrong order.

To provide more prompt and professional after-sale service, you may contact us via below ways
E-mail: liene.service@hannto.com 

Caution & Notice

1. The printer is best used in an environment with a temperature of 20 ℃ – 25 ℃ and relative humidity of 40% – 60%. Improper ambient temperature and humidity will affect the printing quality, resulting in paper jam and incomplete printing.
2. Do not use unofficial Mono paper, ZINK paper or the Smart Sheet of ZINK paper to ensure the printing quality.
3. Do not mix the ZINK paper and the Smart Sheet in different packs, otherwise, the printing quality will be affected. When a pack of ZINK paper is used, it is recommended to load the whole pack, load another pack after it is used up, and calibrate it with the Smart Sheet in the original pack.
4. When loading the paper, do not touch the glossy side of the paper to avoid leaving fingerprints and affecting the printing quality, and ensure that the glossy side of the paper is upward; When placing the ZINK paper, place the Smart Sheet barcode down at the bottom and lay it flat inside the machine.
5. During printing, do not cover the paper outlet or touch the paper, as this will affect the print quality; do not forcefully pull the paper to avoid damaging the printer.
6. When storing the paper, high temperature and direct sunlight will discolor the paper; a humid environment, water and other solutions will discolor and bend the paper; dust will scratch the surface of the paper and damage the machine.
7. When pasting photos, choose a smooth and flat surface to avoid moisture and prevent curling, warping or degumming.
8. The printer has a built-in lithium battery, which should not be stored in a high-temperature environment, charged at least once every 3 months, and prohibited from use after immersion in water.
9. Do not place the battery in an extremely high-temperature environment, such as sunlight, fire, microwave oven, oven, etc., as this may cause an explosion or leakage of flammable liquids or gases.
10. Do not place the battery in an extremely low-pressure environment as this may cause the battery to explode or leak flammable liquids and gases.
11. If the battery becomes severely swollen, do not continue to use it.
12. Only batteries approved by the manufacturer are allowed. Replacement with the wrong type of battery may make the safety protection failure, and there will be explosion, fire, and other risks.
13. Do not disassemble, impact, crush or cut the battery, which may cause an explosion.
14. Please do not dispose of the batteries in the household garbage and follow the appropriate regulations for the safe disposal of used batteries.
15. Please do not put the paper where children can touch it to avoid accidental touch.
16. Avoid direct sunlight. It is recommended that the storage temperature be 0 ℃ – 25 ℃ and the relative humidity by 40% – 55%.
17. The Smart Sheet can be used to clean the print head, please keep it in a safe place.

FCC Statement

The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention
of users of this product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Regulatory compliance information

Hereby, Hannto Technology Co., Ltd. declares that
the radio equipment type ZPP110 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://global.liene-life.com/pages/Service/declaration.html
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

• The operating temperature range of the battery is 5 °C~40 °C.
• Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas;
• A battery is subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Tips: The illustrations of products, accessories, and user interface in this Manual are indicative and for reference only. The actual product may slightly differ due to product updates and upgrades.

Pearl K100 Portable Photo Printer

• Product Name:
  • Portable Photo Printer
• Model:
  • ZPP110
• Rated Input:
  • 5 V 1 A
• Battery Capacity:
  • 500 mAh
• FCC ID:
  • 2AZHDZPP110
• Dimensions:
  • 126×85×25 mm
• Net Weight:
  • ~183 g
• Operation Temperature:
  • 15°C~32°C
• Wireless Connectivity:
  • Bluetooth 5.0
• Maximum Output Power:
  • 4.5 dBm
• Working Frequency:
  • 2402-2480 MHz

Manufacturer: Hannto Technology Co., Ltd.
Address: Room 704, Building 1, No.88, Shengrong Road, Pudong, Shanghai, China

References

• Liene Photo Printers | Liene-life
• Liene Photo Printers | Liene-life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>