GF21 Mini Car GPS Anti-theft Tracker User Manual
- June 12, 2024
- GPS Tracker
Table of Contents
- GF21 Mini Car GPS Anti-theft Tracker
- GF21 mini car GPS anti-theft tracking locator
- Operating Instructions
- Preparation Before Use
- Power on
- Account Login
- LED lights
- SMS commands
- SMS operation
- Specifications:
- FAQ
- How to use the GPS tracker?
- **Where are the Power button?
- What are the meaning of the LED lights?
- The yellow (orange) LED light always on bright?
- **Turn on the device, all lights blinking, APP display: Offline, the
- How do I know the tracker communication is connected?
- How to set Voice Monitor number and how it works?
- How to use Voice Recorder?
- How to use SMS coordinate / Track using SMS not APP?
- **How to manage many devices from 365GPS in one account / Creat Admin
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GF21 Mini Car GPS Anti-theft Tracker
USER MANUAL
GF21 mini car GPS anti-theft tracking locator
- Two-way Call: Address Book Number Calls with Users.
- Remote monitoring: a highly sensitive microphone that monitors the surrounding sound in real time in case of an emergency.
- Intelligent Power Saving: Turn off/turn on GPS and data upload in time.
- Mobile client/computer service platform, multi-control mode.
Operating Instructions
Tracking platform: www.365gps.com
Android application: GPS365
iOS application: GPS365
Login ID: IMEI number (15 digits)
Default password: 123456
Preparation Before Use
1. Prepare a nano sim card which compatible 2G GSM network, if a new SIM
card, need 24 hours to activate properly; also need to set off the PIN code of
the sim card
2. Open GPRS and Caller ID Display service of the sim card
Power on
Insert the nano sim card into the tracker’s sim card slot (there is a missing angle alignment for sim card and the slot ), power button is the black button next to sim card slot.
Power On : long press for 3 seconds
SOS : long press for 3 seconds in power on mode
Power off : long press for 10 seconds (with sim card)
Power off : long press for 3 seconds (without sim card)
Account Login
There is a sticker with every device, 15 digits numbers– it’s the IMEI number,
just the Login ID.
Open 365GPS APP:
Login ID : IMEI number ( 15 digits )
Password : 123456
LED lights
Red : Battery, slow normal, fast low battery, bright on charging
Yellow : GSM, slow normal, fast search signal, bright no sim
Blue : GPS, slow normal, fast search, bright get GPS no sim
SMS commands
000 # number # number # number # (binding three phone)
111 TF Card Voice Recording 10 minutes pause
222 TF Card Voice Recording 10 minutes pause, auto recording 10 minutes
again if any voice
333 voice-activated dial-back call to binding numbers
444 delete all contents of memory
555 turn off all features
666 vibration alarm SMS to binding number
777 vibration alarm call to binding numbers
888 play the memory recording—this require a speaker
999 SMS Coordinate Positioning
SMS operation
Inquire IMEI No.: “ imei# ”
Restore default password: “ pwrst ”
Restore to the factory settings: “ 1122 ”
Set Upload interval: “ time#minute ” (minute range 1-120 minute); “
md#second ” (second range 10-60 seconds)
Open/Close LED: “ LED#on , LED#off ”
APN settings: “ APN#parameter#account#password# ”
Remote Restart: “ sysrst ”
Vibration Alarm: “ 6666#on# / 6666#off# ”
Modify IP address: “ domain # IP # Port ID # ”
Heartbeat Packet Time: heartbeat#No.#(no.=second)
Legal Notice: This product development is only used for personal,
company, and transportation fleet safety guards.
Please comply with national laws and regulation of the country.
Specifications:
Model Number: GF-21
Material: Plastic
Size: 2.6×1.3×4.3cm
Battery: Built-in 5V 350mAh rechargeable battery
Color: Black
Charging Input: 5V
Communication frequency: 850/900/1800/1900MHz
Positioning mode: WIFI+LBS+GPS
Working Temperature: -20-85°C
FAQ
How to use the GPS tracker?
a) Prepare a nano sim card which compatible 2G network and open GPRS service
(Very important because GPS tracker only work with 2G ). lf a new SIM card,
need 24 hours to activate properly;
also need to set off the PIN code of the sim card — very importantHAIso sim
card open GPRS internet service is required, use the internet upload location
data to our server.
b) Insert the nano sim card into the tracker slot (there is a missing angle
alignment for sim card and the slot)
c) Long press the power button for 3seconds to turn on the tracker, wait
yellow LED slow flashing
d) Download our APP 365GPS, login ID: 15digits IMEI on the tracker, password:
123456
e) Test in the outdoor open sky will be helpful to get GPS satellite signal
and accuracy location.
**Where are the Power button?
**
a) Power button: next to the sim card slot
What are the meaning of the LED lights?
Red: Battery capacity
Blue: GPS signal
Yellow: GSM signal
Fast flashing: mean search for signal (re fast mean low power)
Slow flashing: mean it’s normal, work properly
Always on:
Red always on — in charging mode
Yellow always on —
a: no sim card is inserted
b: you don’t plug into the sim card correctly properly
The yellow (orange) LED light always on bright?
At first – Does your sim card support 2G GSM network? And is there 2G network service in your house now? Only a sim card compatible with 2G works in the tracker, this is most important! 2G sim card — Yes! If the Yellow light always bright, mean you don’t plug into the sim card correctly and tightly, please take it out and insert again. Or you try another new sim card into it. Yellow LED blinking is normal, please make the Yellow LED blinking.
**Turn on the device, all lights blinking, APP display: Offline, the
address is China?
**
- The Chinese address is our company, we tested this GPS tracker before sent to you, please don’t worry about display Chinese address – it means the tracker quality test and work properly.
- If your sim card compatible with 2G, yellow LED blinking fast
- You didn’t remove off the PIN code of your sim card , put the sim card in your mobile, turn off the PIN code, then insert the sim card into the tracker again.
- If you already turn off the PIN code, yellow LED still blinking fast – it’s
the APN set problem, you sim operator APN not in our server list, this is the
SMS command to set APN:
APN setting:
“APN#parameter#account#password#” (if there is no account password, don’t need to fill in.)
(For example, there is a Holland Mobile APN is: KPNMobile, text message: APN#KPNMobile#)
Text this message: APN#parameter to the sim number in the tracker, will reply you a message: set successfully. Please have a try, thanks.
How do I know the tracker communication is connected?
Text this SMS message: imei#, from your mobile phone sent to the number in
tracker You will get a SMS reply:
359339075000*** (15digits imei numbers)
Note: send SMS to sim card number remove country code: +39 / +44 / +49…, only
leave the phone number
How to set Voice Monitor number and how it works?
Method 1: APP — Dial Back — Pickup Tel, set your mobile phone number.
The tracker will call your phone, you can answer ro reject the call. — This
mean it sets successfully.
Next time: your phone call the tracker directly, it will answer automatically,
don’t need to set again.
Method 2: send SMS Command ” Monitor#your mobile number# ” to the sim card
phone number in GPS tracker.
How to use Voice Recorder?
Method 1: APP voice recorder: Voice — click blue icon, upload 15seconds
recorder
Method 2: TF card voice recorder – At first: send 000#phone number, binding
your phone number into the device.
SMS: 111 – recording 10 minutes pause
222 — voice recording 10 minutes pause, auto recording 10minutes again if any
voice, every time 10minutes, cancel send SMS 555
How to use SMS coordinate / Track using SMS not APP?
SMS coordinate SMS Command : 999 then you get a link of google map, open link to get the location.
- SMS coordinate only work when the tracker is power on and connected with server, if the device is shutdown or don’t open GPRS service or out of credit — can’t get SMS coordinate successfully.
**How to manage many devices from 365GPS in one account / Creat Admin
account group ID?**
- Click the top left corner plus button
- Creat a new login ID( 6-12characters), input the second device’s IMEI and password which you want to add them in one group
- Log out the first device and login
APP again:
Login ID: use the ID you creat
Password: same as first device’s (default is 123456) - Click the middle head icon, so you will see all the devices’ list in this group ID.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>