JBC SCDA Tool Holders for Compact Stations Instruction Manual
- June 5, 2024
- JBC
Table of Contents
JBC SCDA Tool Holders for Compact Stations
This manual corresponds to the following references:
- 0012994 SCD for CD
- 0014706 SCDA for CA and CF
- 0014720 SCDD for CDD
- 0014719 SCDP for CP
Packing List
The following items are included:
- Tool Holder…………….. 1 unit according to purchased reference
- Manual ………………….. 1 unit Ref. 0028656
Replacement
Before carrying out maintenance, always unplug the tool. Allow the equipment to cool down. Be sure that the power supply is disconnected before changing any spare part.
Changing the Tool Holder
Turn the station off and allow the equipment to cool down.
- Remove the locking knob (1) and separate the holder from the station. Then remove the connection screw (2).
- Pull the tool holder gently until the connector comes out.
- Place the new tool holder following the same steps conversely.
Specifications
- SCD / SCDA / SCDD / SCDP
- Tool Holders for Compact Stations
- Ref.: 0012994 SCD for CD
- Ref.: 0014706 SCDA for CA and CF
- Ref.: 0014720 SCDD for CDD
- Ref.: 0014719 SCDP for CP
- Package Dimensions: 111 x 81 x 41 mm
- (L x W x H) 4.37 x 3.19 x 1.61 in
Complies with CE standards.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>