Idinio WIFI Smart lamp E27 User Guide
- June 5, 2024
- idinio
Table of Contents
Idinio WIFI Smart lamp E27
CONNECTION
Your tablet or smartphone must be connected to a 2.4GHz WiFi network
How To Download
Download the ldinio Smart app from the Google Play or Apple App Store and create a user account.
Basic Network Requirments
This device only supports 2.4CHz WiFi networks so when you own a 5CHz router you must select the 24GHz network or disable the 5GHz network first in your router menu. Refer to your router manual for instructions.
Add Device
-
Make sure that during the pairing process this device as well as your iOS or Android device will remainin the WiFi range of your router.
-
Place the bulb. The bulb will start blinking rapidly. If this is not the case you must reset the device by turning the bulb on/off/on/off/on/off/on.
-
Press “‘and select ‘Lighting’ and choose the right bulb
-
Select the right 2.4GHz WIFi network and password and tap Confirm
-
Confirm that the bulb is blinking rapidly.
-
The app will auto-connect with the device. Once the process is completed. it will prompt you to rename the device. Enter a new name and ‘Save
-
lf adding the device failed, it maybe a networking problem. You can now proceed using the AP Mode for adding the device.
-
The bulb must blink slowly. If this is not the case you must reset the device by turning the bulb on/off/on/off/on/off/on.
-
Press and select’Lighting’ and choose the right bulb.
-
Tap Other Mode’ in top right corner and select ‘AP Mode
-
Check if the connection light is flashing slowly. Press’Confirm indicator slowly blinks. Then select your 24GHz I network, password and confirm.
-
Now connect you smartphone or tablet with the device’s hotspot. Tap Connect. The app will now open the settings menu of your smartphone or tablet. Open WiFi settings
-
Search the smart device name in the list of VWiFi networks and connect. Devices will connect. Now open the ldinio Smart app again and wait until the connection process is finished.
-
Wait until the connection is successful.
Warning
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit, fire or electric shock).
- Do not use the product if a part is damaged or defective.
- Replace a damaged defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician to reduce the risk of electric shock.
- Disconnect the product from the power source if problems occur.
- Make sure the product is sufficiently ventilated during use.
- Never cover the lamp during use.
- Keep the product out of reach of children or animals.
- Do not look directly at the product during use.
- The LED lights are extremely bright and may cause serious eye damage.
- The electrical components of the product must be earthed.
- Do not use the product if a part is damaged or defective.
- Replace a damaged or defective device immediately.
Important Instruction
- Caution! Risk of electric shock
- The product contains a non-dimmable lamp
- The item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-iland minimize any potential negative impact on human health and the environment
- This product comes the CE mark of certification, which confirms that this product meets EU safety, health and environmental protection requirements
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>