idinio 8720572374959 WiFi Smart Bulbs E27 with App User Guide
- June 5, 2024
- idinio
Table of Contents
idinio 8720572374959 WiFi Smart Bulbs E27 with App
Quick Start Guide
- Your tablet or smartphone must be connected to a 2.4GHz WiFi network
- Download the ldinio Smart app from the Google Play or Apple App Store and create a user account.
Basic network requirements
This device only supports 24CHz WiF networks so when you Own a 5GHz router you
must select the 2.4GHz network or disable
the the5CHz network first in your router menu. Refer to your router manual for
instructions.
Add device
- Make sure that during the pairing process this device as well as your iOS or Android device will remain
in the WiFi range of your router.
-
Place the bulb. The bulb will start blinking rapidly. If this is not the case you must reset the device by
turning the bulb on/off/on/off/on/off/on.
-
Press and select Lighting’ and choose the right bulb.
-
Select the right 2.4GHz WiFi network and password and tap Confirm
-
Confirm that the bulb is blinking rapidly.
-
The app will auto-connect with the device. Once the process is completed, it will prompt you to
rename the device. Enter a new name and ‘Save’
AP Mode
-
LF adding the device failed, it may be a networking problem. You can now
proceed using the AP Mode for adding the device. -
The bulb must blink slowly. If this is not the case you must reset the device by turning the bulb on/of/on/off/on/off/on.
-
Press select ‘Lighting’ and choose the right bulb.
-
Tap Other Mode in the top right corner and select ‘AP Mode.
-
Check if the connection light is flashing slowly. Press ‘Confirm indicator slowly blinks. Then select your 2.4GHz
network. password and confirm. -
Now connect you smartphone or tablet with the device’s hotspot. Tap Connect. The app will now open the
settings menu of your smartphone or tablet. Open WiFi settings. -
Search the smart device name in the list of WiFi networks and connect. Devices will connect. Now open the
Idina Smart app again and wait until the connection process is finished. -
Wait until the connection is successful.
WARNING
Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference. Only use the product as described in this document. Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit, fire, or electric shock, Do not use the productive part is damaged or defective. Replace a damaged defective product immediately. Do not drop the product and avoid bumping. This product may only be serviced by a qualified technician to reduce the risk of electric shock. Disconnect the product from the power source if problems occur.
Make sure the product is sufficiently ventilated during use. Never cover the lamp during use. Keep the product out of reach of children or animals. Do not look directly at the product during use. The LED lights are extremely bright and may cause serious eye damage. The electrical components of the product must be earthed. Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
Caution! Risk of electric shock.
the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste you will help reduce the volume of waste sent to incinerators or land and minimize any potential negative impact on human health and the environment
This product carries the CE mark of certification, which confirms that this product meets EU safety, health, and environmental protection requirements.
The product contains a non-dimmable lamp.