MOEN INS12052 Tub Filler Spout Installation Guide
- June 4, 2024
- Moen
Table of Contents
MOEN INS12052 Tub Filler Spout
HELPFUL TOOLS
For safety and ease of faucet replacement, Moen recommends the use of these helpful tools.
Parts List
- A. Tub Spout
- B. Set Screw
- C. Aerator Tool *
- D. Stream Straightener * (comes pre-installed)
- E. Grease Pack
- F. Hex Wrench(3/32”)
INSTALLATION
-
Remove flush plug.
-
Remove protective sleeve , and apply grease (E).
-
Install tub spout (A) upside down onto pipe.
-
Barely tighten tub spout set (B) screw with 3/32” hex wrench (F).
-
Rotate tub spout (A) to the proper position, with the spout opening facing down.
-
Secure spout by tightening tub spout set screw.
- Remove stream straightener (D) with tool (C) for flushing.
- Turn on hot and cold water and flush any debris for 15 seconds. Turn off hot and cold water
- Re-insert stream straightener into spout and tighten with aerator tool
References
- MOEN | Bathroom & Kitchen Faucets
- Moen|Llaves para baño y cocina, cabezales, accesorios y más
- Register Your Product | Moen
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>