QAZQA 107687 Outdoor Floor Lamp White 60 cm Flower Pot Instruction Manual

QAZQA 107687 Outdoor Floor Lamp White 60 cm Flower Pot

Product Specifications

• Model: Verano FL 60 White Flower
• Product Code: 107687
• Power Supply : 220-240V~
• Frequency: 50Hz
• Socket Type : E27
• Maximum Wattage : 23W
• Dimensions: 415mm x 600mm x 170mm (W x H x D)
• Cable Length : 2000mm
• Manufacturer: FittinQ B.V. (Netherlands) and FittinQ LTD (United Kingdom)
• Website: www.qazqa.nl

Product Usage Instructions

1. Unpack the product carefully and ensure all components are included.
2. Place the Verano FL 60 White Flower lamp on a flat, stable surface.
3. Insert a compatible E27 bulb with a maximum wattage of 23W into the socket.
4. Connect the lamp to a power source using the provided cable with a length of 2000mm.
5. Switch on the lamp using the appropriate switch or control mechanism.
6. Adjust the lamp position and direction as needed to illuminate the desired area.
7. Ensure proper ventilation around the lamp to prevent overheating.
8. When not in use, switch off the lamp and unplug it from the power source.

FAQ

• Q: Can I use a higher-wattage bulb than 23W?
  • A: It is recommended to strictly adhere to the maximum wattage limit of 23W to prevent damage to the lamp and ensure safe operation.
• Q: How do I clean the Verano FL 60 White Flower lamp?
  • A: To clean the lamp, first, make sure it is switched off and unplugged. Use a soft, dry cloth to gently wipe the surface of the lamp. Avoid using harsh chemicals or abrasive materials that may damage the finish.
• Q: Is the Verano FL 60 White Flower lamp suitable for outdoor use?
  • A: The IP65 rating of the lamp indicates that it is protected against dust and low-pressure water jets, making it suitable for outdoor use in covered areas. However, direct exposure to harsh weather conditions should be avoided.

Safety Precautions

Verano FL 60 White Flower 107687

FLOOR VERSION

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.

Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.

3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

5. Take account of the minimal separation distance from other objects and the room required around the fitting.

6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.

7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.

8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components

9. Take account of all available technical information.

10. Meaning of symbols:

    • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste

    • This icon indicates the level of water-proof and dust-proof

    • Protection Class I : the fitting must be earthed
      Protection Class Il : the fitting is doubled insulated and does not require earthing
      Protection Class III : the fitting is low-voltage
      Minimum distance from lighted objects (meters)
      The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
      The armature is designed to work only with the indicated voltage. Different items require different working voltages.
      The luminaire can be used in combination with a dimmer
      The luminaire can be dimmed by wall switch
      The reference light angle and light space of the luminaire

    • This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste

11. Take note of the symbols when connecting wires

FittinG B.V.

Smaragdweg 52, 5527 LB Hapert,

The Netherlands
www.qazqa.nl

FittinQ LTD

55 Baker Street,  London, WIU 7EUUnited Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>