i-tec U3GL3SLIM USB 3.0 Slim HUB 3 Port + Gigabit Ethernet Adapter User Guide

: June 4, 2024
: i-tec

Table of Contents

i-tec U3GL3SLIM USB 3.0 Slim HUB 3 Port + Gigabit Ethernet Adapter
OVERVIEW
INTRODUCTION
SPECIFICATION
DRIVER INSTALLATION*
SAFETY INSTRUCTIONS
FAQ
FCC COMPLIANCE STATEMENT
EUROPEAN UNION ONLY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

i-tec U3GL3SLIM USB 3.0 Slim HUB 3 Port + Gigabit Ethernet Adapter

Please read the entire instruction manual carefully. Detailed manual is available on our website www.i-tec.cz/en/ in the tab „Manuals, drivers“. In case of any issues, please contact our technical support at: support@itecproduct.com

OVERVIEW

i-tec U3GL3SLIM USB 3.0 Slim HUB 3 Port + Gigabit Ethernet
Adapter-1

Cable with USB 3.0 connector
3x USB-A 3.0 port
RJ-45 port

INTRODUCTION

Thank you for purchasing „i-tec USB 3.0 Slim HUB 3 Port With Gigabit Ethernet Adapter“. This is a product that combines the functions of 3-port USB 3.0 HUB with Gigabit Ethernet adapter.
The HUB offers three USB 3.0 ports with Plug & Play option. HUB is powered from the USB 3.0 bus and has a built-in surge protection for your computer in the event of a short circuit on the peripheral devices. You will just connect the HUB by the USB 3.0 cable to your computer and immediately you can start using it. You can connect and disconnect your favorite USB devices such as flash drives, mobile phones, tablets, digital cameras, MP3 players, printers, etc.
The Gigabit Ethernet port allows user‘s computer instantly connect to a 10/100/1000Mbps network. No need to purchase an extra Gigabit network card and share a PCI or Cardbus slot. With compliance with USB 3.0 specification, this adapter ensures true 10/100/1000Mbps network speed without any compromise. Besides, compact and bus-powered design means external power is not required.

SPECIFICATION

3x USB-A 3.0 port for connecting USB equipment
1x USB-A 3.0 connector for connecting to a notebook / tablet / PC
1x Ethernet 10/100/1000Mb/s LAN RJ-45 port with function MDI/MDIX and self-correction
VIA VL813 chipset compliant with USB 3.0 specification, revision 1.0
ASIX AS88179 USB 3.0 to Gigabit Ethernet Adapter chipset – supports standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az (Energy Efficient Ethernet)
Interface USB 3.0, backward compatible with USB 2.0
LED indication for Ethernet connection
Supports Wake-on-LAN
Operation temperature: 0-40°C
Storage temperature: -10 to +80°C
Humidity: up to 85%
Dimensions: 125 x 29 x 15 mm
Weight: 50 g

SYSTEM REQUIREMENTS

Hardware requirements: Notebook / tablet / PC with free USB 3.0 port.
Operation System: Windows 7 / 8 / 8.1 / 10 32/64 bit, macOS X (macOS 11.0- 11.2 not supported), Linux, Android

DRIVER INSTALLATION*

*The driver version is subject to change due to the driver updated.
Note: DO NOT connect the device to your computer before completing the installation of driver!

DRIVER INSTALLATION FOR ETHERNET PORT

Windows Operating System

Please download the current drivers on www.i-tec.cz/en and start the installation by double-clicking on the file.
Wait for the program to install the drivers.
Click to complete the installation.
Mac Operating System
Please download the current drivers on www.i-tec.cz/en and start the installation by double-clicking on the file.
Wait for the program to install the drivers.

INSTALLATION FOR USB 3.0 PORTS
Windows, mac and Linux: This HUB will be automatically detected and USB 3.0 ports will automatically install immediately after connecting to the USB port on your notebook / PC

PACKAGE CONTENTS

i-tec USB 3.0 Slim HUB 3 Port + Gigabit Ethernet Adapter with integrated cable (16 cm)
Quick Installation Guide

SAFETY INSTRUCTIONS

Do not expose to extreme temperatures and air humidity.
Use the device on flat surfaces – you will prevent it from slipping and falling to the ground.
Save the user manual for a possible use later. In cooperation with the service department:
Check functionality after falling to water or to the ground.
Check functionality when the cover is broken.
Send the device back if it does not work in accordance with the user manual.

FAQ

Available on our website www.i-tec.cz/en/ on the „FAQ“ tab of this product.

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res-idential installation.

EUROPEAN UNION ONLY

NOTE: MARKING IS IN COMPLIANCE WITH EU WEEE DIRECTIVE

This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream. This wil benefit the environment for all. (European Union only)

Reference:i-tec U3GL3SLIM USB 3.0 Slim HUB 3 Port + Gigabit Ethernet Adapter User Guide- device.report