KLARSTEIN 10037816 Wonderwall Air Art Smart Infrared Heater Instruction Manual

KLARSTEIN 10037816 Wonderwall Air Art Smart Infrared Heater

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number

| 10037816 10037818

10037819 10037820

10037821 10037822

10037823 10037824

10037825 10037826

10037827 10037828

10037829 10037830

10037831 10037832

10037833 10037834

10037835 10037836

| 10037837 10037838

10037839 10037840

10037841 10037842

10037843 10037844

10037845 10037846

10037847 10037848

10037849 10037850

10037851 10037852

10037853 10037854

---|---|---
Power supply| 220-240 V ~ 50 Hz
Performance| 350 W| 350 W
Dimensions| 6060 cm| 12030 cm
WiFi standard| 802.11 b/g/n
WiFi frequency| 2,4 GHz
WiFi radio-frequency power (max.)| 20 dBm

Item number

| 10037871 10037872 10037873 10037874 10037875

10037876 10037877 10037878 10037881 10037882

1003788310037884 10037885 1003788610037887

1003788810037889 10037890 10037891 10037892

10037893 10037894 10037895 10037896 10037897

10037898 10037899 1003790010037901 10037902

1003790310037904 100379051003790610037907

100379081003790910037910 10037911 10037912

10037913 10037914 10037915 10037916 10037917

10037918 10037919 10037920 10037921 10037922

10037923 10037924 10037925 10037926 10037927

10037928

---|---
Power supply| 220-240 V ~ 50 Hz
Performance| 700 W
Dimensions| 120*60
WiFi standard| 802.11 b/g/n
WiFi frequency| 2,4 GHz
WiFi radio-frequency power (max.)| 20 dBm

PRODUCT DATA SHEET

Model identifier(s):| 10037816 10037818 10037819 10037820 10037821 10037822 10037823

10037824 10037825 10037826 10037827 10037828 10037829 10037830

10037831 10037832 10037833 10037834 10037835 10037836

---|---
Item| Symbol| Value| Unit| | Item| Unit
Heat output| | Type of heat input, for electric storage local space heaters only
Nominal heat output| Pnom| 0.35| kW| | manual heat charge control, with integrated thermostat| no
Minimum heat output (indicative)| Pmin| 0.0| kW| | manual heat charge control with room and/or

outdoor temperature feedback

| no
Maximum continuous heat output| Pmax,c| 0.35| kW| | electronic heat charge control with room and/or

outdoor temperature feedback

| no
Auxiliary electricity consumption| | fan assisted heat output| no
At nominal heat output (fan motor)| elmax| 0.35| kW| | Type of heat output/room temperature control
At minimum heat output (fan motor)| elmin| 0.000| kW| | single stage heat output and no room temperature control| no
In standby mode| elSB| 0.001| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| yes
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| yes
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany
Model identifier(s):| 10037837 1003783810037839 10037840 10037841 10037842 10037843

10037844 10037845 10037846 10037847 10037848 10037849 10037850

10037851 10037852 10037853 10037854

---|---
Item| Symbol| Value| Unit| | Item| Unit
Heat output| | Type of heat input, for electric storage local space heaters only
Nominal heat output| Pnom| 0.35| kW| | manual heat charge control, with integrated thermostat| no
Minimum heat output (indicative)| Pmin| 0.0| kW| | manual heat charge control with room and/or

outdoor temperature feedback

| no
Maximum continuous heat output| Pmax,c| 0.35| kW| | electronic heat charge control with room and/or

outdoor temperature feedback

| no
Auxiliary electricity consumption| | fan assisted heat output| no
At nominal heat output (fan motor)| elmax| 0.35| kW| | Type of heat output/room temperature control
At minimum heat output (fan motor)| elmin| 0.000| kW| | single stage heat output and no room temperature control| no
In standby mode| elSB| 0.001| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| yes
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| yes
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany

SAFETY INSTRUCTIONS

• Do not use the appliance until it is securely fi xed as described in this manual.
• Check that the voltage indicates on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
• If the supply cord is damaged, it must be replaced by a qualifi ed engineer in order to avoid a hazard.
• The heater must not be positioned directly under the power socket.
• Keep furniture, curtains and other fl ammable material at least 1 meter away from the appliance.
• Do not leave the appliance unattended during use.
• Do not leave the appliance unattended whilst connected to the mains supply.
• Keep out of reach of children and do not allow them to operate this appliance.
• This appliance is intended for household use only and should not be used for industrial purposes.
• Do not operate this appliance after a malfunction or after being damaged in any way.
• Repairs to electrical appliances should only be performed by a qualifi ed electrician.
• Improper repairs may place user at serious risk.
• Do not run the mains cable under carpets, rugs, etc.
• Do not allow the mains cable to hang over sharp edges or come in contact with hot surfaces.
• In order to avoid overheating, do not cover the heater.
• Do not use this heater with a programmer, timer, separate remote control system or any other device that switches the heater on automatically, since a fi re risk exists if the heater is covered or positioned incorrectly.
• Never immerse the product in water or any other liquid for any reasons.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• Do not use the appliance outdoors.
• Do not use if you have wet hands.
• Never use the appliance on or near hot surfaces.
• Do not operate with a damaged cord.
• Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.
• Do not clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance.
• This appliance is not intended for use by persons (including children) with reduced Physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

CAUTION
Risk of burns! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

WALL INSTALLATION

to drill the holes.
Step 3:| Step 4:
Insert the dowels into the holes.| Screw the supplied screws into the wall.
Step 5:| Step 6:
Fasten the panel to the screws.| Move the panel first to the left and then down to fix it in place.

Note : The mounting kit included in the scope of delivery is intended for vertical mounting on a stable wall. When mounting on other types of wall, you will need appropriate mounting brackets (not included). Make sure that the wall is suitable for mounting. It is strongly recommended that the panel be installed by a qualified electrician or an installer authorized by the manufacturer. The heater must be at least 20 cm away from all objects, walls, etc.; the distance to the floor must be at least 20

DEVICE OVERVIEW AND FUNCTION KEYS

Control panel and remote control

1. On/Off
2. WLAN
3. Raise
4. Lowering
5. Timer
6. Heating status display

Bildschirm

1. Weekday
2. Open window“ symbol
3. Timer symbol
4. WLAN icon
5. Time
6. Temperature
7. Modes:
8. M = Manual mode
9. P = Program duration (P1-P4)
10. H = holiday mode

COMMISSIONING AND OPERATION

The device has an integrated WLAN control unit. This means that no additional thermostat is required to operate the device. As soon as your device is connected to the app, your smartphone communicates with the WLAN control device and you can control the device via smartphone. If your home network is down, it is possible to operate the device manually via the control unit. As soon as the device is connected to the WLAN again, you can control the device via your smartphone again.

The device has the following features:

• Manual mode: easy temperature control and 24-hour timer function
• Intelligent mode: 7 weekday settings, 4 time periods per day
• Holiday mode: Set a fixed temperature during your absence and return to normal settings when you return.
• Detection function for open windows

Open window detection
If the unit detects a drastic drop in room temperature within a short time in heating mode, the „open window“ symbol on the screen starts to flash. The heater switches off for 30 minutes and automatically resumes operation with the previous setting after 30 minutes. This function can be activated/deactivated by pressing the – button for at least 5 seconds. The „open window“ symbol is displayed or not on the screen, depending on the setting.

Temperature Calibration
Press the + button for 5 seconds to access temperature calibration. The number can be adjusted by pressing the + and – buttons. The calibration range is -5 to +5 degrees.

Activate/deactivate WLAN function
By pressing the Timer button for 10 seconds, the WLAN function can be activated/deactivated.

MANUAL OPERATION

• Press the On/Off button to switch the unit on.
• The „M“ symbol appears on the screen. The unit is now in manual mode.
• Adjust the temperature by pressing the + and – buttons. 2 seconds later, the current room temperature is displayed on the screen.
• To set a timer, press the Timer button. 00H“ is displayed on the screen. Set the desired time until the appliance switches off automatically using the + and – buttons.

Note: Once the timer has been activated, the appliance is automatically in manual mode.

CLEANING AND MAINTENANCE

• Before cleaning, unplug the appliance from the power outlet and let it cool down completely.
• Never immerse the appliance in water or pour water over it.
• Clean the surface of the unit with a soft, damp cloth.
• For glass models, use a soft cloth and glass cleaner.
• Never use a wet cloth for cleaning.
• After cleaning, wipe the product dry with a dry cloth.
• Do not use aggressive or abrasive cleaners or sponges to clean the unit, as this could scratch the unit or cause other irreparable damage.
• The unit must be completely dry before reuse.

DEVICE CONTROL BY SMARTPHONE

If you integrate the device into your home WiFi, you can conveniently operate it via the associated Klarstein app. The app not only allows you to remotely control the device via your smartphone, but also gives you access to recipes and additional information. Follow these steps to connect your smartphone to your Klarstein device:

1. Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
2. Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
3. Open the Klarstein app.
4. Sign in to your account. If you do not have an account, sign up in the Klarstein app.
5. Follow the instructions from the app.

App Download
Use the scan function of your smartphone to scan the QR code and save the app on your smartphone.

Note : The app provides further information on how to use the app and help on how to connect to your device as soon as you open it for the first time.

Troubleshooting connection problems

If your Klarstein device cannot be found in the WLAN, check the following:

• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions in the app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity during the connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless router, activate it in your router settings.
• Please make sure WLAN signal light is flashing rapidly before connecting to APP, if not, long press WLAN button until it’s flashing rapidly. If you still fail, please continually long press WLAN button until the signal light is flashing slowly and re-try the connection.

Note: For further help, follow the instructions in the app when setting up the connection.

DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham- by-Sea BN43 6RE United Kingdom The complete declaration of conformity of the manufacturer can be found at the following link: use.berlin/10035112

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>