Brook ZPP0067 Pocket Auto Catch Light User Manual

Brook ZPP0067 Pocket Auto Catch Light

Product Information

• The Pocket Auto CatchLight is a device used to catch Pokémon in the Pokémon Go game.
• The device comes with a Type-C charging port for charging purposes.
• The device has two connection buttons with RGB signal display for pairing.
• The device takes approximately 60 minutes to fully charge and can last for approximately 15 hours of continuous use when fully charged.
• The Pocket Auto Catch Light will time out automatically every hour, and players have to reconnect it.
• The product is not water-resistant.

Product Usage Instructions

1. Turn on your mobile Bluetooth.
2. Insert the cable into the USB-C port to charge the device. When charging, the green, red, and blue lights flash alternately.
3. Confirm the 1P connection button indicator light is flashing green. Press and hold the 1P or 2P connection button until it starts flashing purple or green.
4. Open the Pokémon Go app and go to Settings. Tap on Connected Devices and Services. Tap on the red circle on Pocket Auto Catch Light. When it pops up a new Pokémon Go Plus in the settings in the game, tap it to pair.
5. The connection pairing indicator light will flash red when pairing is successful.
6. If you are having difficulties pairing, go to Bluetooth in Settings on your phone to remove/clear Pokémon Go Plus. Then go to the Settings in the game, exit/clear Pokémon Go Plus. Tap on the red circle on Pocket Auto Catch Light. When it pops up a new Pokémon Go Plus in the settings in the game, tap it to pair.
7. The game status indicator lights will display different colors to indicate different statuses, like battery capacity, low power, or the bag being full.
8. The Pocket Auto Catch Light will automatically time out every hour, and players have to reconnect it.

IMPORTANT INSTRUCTION

Having difficulties pairing?
When your Pocket Auto Catch Plus has paired to another device, runs out of power or has any abnormality that it cannot be paired to your current device.

1. Go to “Bluetooth” in “Settings” on the phone to remove/ clear Pokemon Go Plus.
2. Go to the “Settings“ in the game, exit/ clear Pokemon Go Plus.
3. Then tap the red circle on Pocket Auto Catch Plus. When it pops up a new Pokemon Go Plus in the settings in the game, tap it to pair.

Pocket Auto Catch Light may fail to pair to the device because of the update of the Pokemon Go app, and the upgrade of Android and iOS.

Product Description

• 1P connection button & RGB signal display
• 2P connection button & RGB signal display

Pair Pocket Auto Catch Light with your phone

Charge Your Pocket Auto Catch Light

Connection Pairing Indicator Lights

Game Status Indicator Lights

Notice

1. It takes about 60 minutes to fully charge and can last for approximately 15 hours of continuous use. When fully charged, the indicator light will show as white.
2. Standby time is approx. 5 days.
3. Pocket Auto Catch Light will time out automatically every hour, so players have to reconnect it.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

• FCC ID: 2ADKM0067
• IC ID: 29174-ZPP0067
• P/N: Pocket Auto Catch Light
• M/N: ZPP0067

For more details please visit our offcial website at www.brookaccessory.com.
Version 202303V1

References

• Brook Gaming

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>