Klarstein 10031190 Air Purifier User Manual
- May 15, 2024
- Klarstein
Table of Contents
- Klarstein 10031190 Air Purifier User Manual
- Dear customer,
- Parts and functions
- Installing the filter
- Switching on the device
- Modes and timer setting
- Setting the fan speed
- Setting the functions
- CLEANING AND CAR
- Replacing the UV lamp
- TROUBLESHOOTING
- DISPOSAL INSTRUCTIONS
- MANUFACTURER & IMPORTER (UK)
- Manufacturer:
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Klarstein 10031190 Air Purifier User Manual
Dear customer,
Congratulations on the purchase of your appliance. Please read the following instructions carefully and follow them to prevent potential damage. We accept no liability for damage caused by disregarding the instructions and improper use. Please scan the QR code to access the latest operating instructions and further information about the product.
TECHNICAL INFORMATION
Product code | 10031190 |
---|---|
Power supply | 220-240 V ~ 50 Hz |
Airflow volume | ≥ 150 m3/h |
Noise level dB (A) | ≤40 dB (A) |
Dimensions: | 329 mm x 170 mm x 300 mm |
Weight | 4 kg |
Power | 36 W |
Maximum room size | 25 m2 |
UV lamp | 254 nm |
SAFETY INSTRUCTIONS
- Read all instructions and keep the manual in a safe place for future
- To reduce the risk of electric shock in the event of a fault or malfunction, the unit must be connected to a grounded If you are not sure whether your outlet meets the requirements, seek advice from an electrician.
- Only connect the appliance to sockets that correspond to the specified voltage of the appliance.
- Lay the power cord so that no one can step on Keep the power cord awayfrom sources of heat such as heaters, stoves, and radiators.
- Do not immerse the device, the plug or the power cord in water or otherliquids.
- Please ensure that you supervise children when using this
- Pull the plug out of the socket before moving or cleaning the device, opening the ventilation grille, changing the filter or if you are not going to use it for a longer period of
- Do not push any objects through the ventilation
- Do not run the power cord under a
- Do not cover the power cord with blankets, rugs, or the
- Do not route the power cord under furniture or other equipment, and route it so that no one can trip over it.
- Have repairs carried out by qualified specialists only. Have the device checked if it has been damaged in any way or if the power cord or plug is damaged. The same applies if liquids or objects have landed on the device, the device has been exposed to rain or moisture, does not function properly or has been
- Only use the device in the household and strictly follow the directions in the operating We accept no liability for damage caused by disregarding the instructions or improper use.
- Do not use the device
- Do not place any objects on the
- So that the air can circulate, ensure that the ventilation openings are notcovered by furniture, walls or other objects.
- Do not try to repair the device Repairs may only be carried out bytrained specialists.
- Do not use the device with remote controlled sockets or external
Device overview
1 Deck
2 LED display
3 Keys
4 Front cover
| **
---|---
Front side| Left| Right**
Display and function keys
1 Function keys
2 On / off key
| **
---|---
Display overview| Function keys**
Built-in parts
- Left cover
- Fragrance depot
- Housing
- Activated carbon filter and photocatalyst
- UV lamp
- HEPA filter
- Right cover
Air purifying system
- HEPA filter
- UV lamp
- Activated carbon filter and photocatalyst
COMMISSIONING AND OPERATION
Parts and functions
Part | Function |
---|---|
HEPA filter | Filters pollen, smoke and particles from the air that can cause |
allergies or respiratory diseases. The HEPA filter has an efficiency of more
than 99.9%.
Activated carbon filter| Formaldehyde and benzene are colourless gases with a
pungent odour. They occur in many buil- dings and rooms. The activated carbon
filter filters these substances out of the air.
Photocatalyst| Breaks down harmful and toxic gases in the air and
kills viruses that are in the air.
UV lamp (optional)| Air is the main vector of flu. Air purification is an
effective way to prevent flu. With UV sterilisation technology, the germs can
be reduced by up to 97.6%.
Ion function| Negative ions can support the human metabolism
and the immune system.
Ozone function (optional)| Ozone can break down organic odours and biolo-
gical contamination in the air. To do this, it isolates oxygen from the air in
order to increase the con- centration of ozone in the air. The device
generates 50 mg of ozone per hour.
Fragrance (optional)| Has a calming effect and can increase concentration.
Notes on location
- **** Leave a minimum distance of 30 cm from walls and furniture around the device.
- The minimum distance to televisions or computers should be 1
Installing the filter
Remove the protective covers from the HEPA and activated carbon filters and reinsert the filters into the device.
- Remove the right
- Put the activated charcoal filter and
the fragrance depot in.
- Remove the left
- Remove the cover from the fragrance
]
Connect power
- To reduce the risk of electric shock in the event of a fault or malfunction, the unit must be connected to a grounded
- Plug the power plug securely into the wall
Remove and attach cover
- Removing the cover: Lift the device slightly with one hand and open the coverfrom below with the other hand.
- Attaching the cover: Slide the top of the cover into the holder on the Then press the bottom into the housing.
Switching on the device
Press the on / off button on the device. The device will turn on and the display willlight up as follows:
- Manual mode
- Anions
- Fan speed
Modes and timer setting
Press the MODE button several times to select the individual modes in the
following order: Manual> Auto> 1 hour> 2 hours> 4 hours.
Setting the fan speed
Press the SPEED button several times to select one of the following speeds: LOW(low)> MEDIUM (medium)> HIGH (high):
Setting the functions
**** Press the FUNCTION button repeatedly to select the functions in the following order: ION> OZONE> ION & OZONE> NO FUNCTION. The display will light up as follows:
- The ozone function can be optionally
- People should stay away from the device while the ozone function is in The device automatically switches to the ion function after 1 hour.
- HEPA filter, activated carbon filter and photocatalyst are basic functions and are in operation as soon as you switch on the device
CLEANING AND CAR
- Do not clean the device with
- Do not use abrasive cleaners for
- Do not clean the device with solvents as these agents can cause deformation or
- Do not use chemical cleaners for cleaning.
Replacing the UV lamp
When the UV symbol flashes, the UV lamp needs to be replaced
- Remove the right cover and take out the HEPA filter.
- Hold the UV lamp, turn it 90 ° and remove
- Hold the new UV lamp securely and attach it to the Then turn it 90 °.
- Reinstall the HEPA filter and replace the
TROUBLESHOOTING
Problem | Possible cause and solution |
---|---|
The device does not work. | Check whether the plug is firmly plugged into |
the socket. Plug it in again to be on the safe side.
Check that the left and right covers are attached. If not, turn off the
device, install the covers, and turn the device on again after 15 minutes.
The device runs through and does not turn off any more, the display lights up
red continuously.| Interferences are disturbing the device. Unplug
the device and turn it on again 15 minutes later.
The device does not
remove any odours.
| The activated charcoal filter or the device is dirty. Clean the activated
carbon filter or replace it with a new filter.
The dirt is not remo- ved from the air and the device runs very loudly.| The
HEPA filter is dirty. Clean the HEPA filter or replace it with a new filter.
The dirt is not being caught by the filters. Move
the device to another room and let the fan run at high speed to test whether there is a malfunction.
The room might be too big to purify the air effectively.
DISPOSAL INSTRUCTIONS
If there is a legal regulation in your country regarding the disposal of
electrical and electronic equipment, this symbol on the product or on the
packaging indicates that this product must not be disposed of with household
waste. Instead, it must be taken to a collection point
for the recycling of electrical and electronic equipment. By disposing of this
product in accordance with the regulations, you protect the environment and
the health of those around you from negative consequences. For information on
recycling and disposal of this product, contact your local government or
household waste disposal service.
This product contains batteries. If there is a legal regulation in your country regarding the disposal of batteries, the batteries must not be disposed of in household waste. Consult your local regulations for the disposal of batteries. By disposing of this product in accordance with the regulations, you protect the environment and the health of those around you from negative consequences.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
Importer for Great Britain: Berlin Brands Group UK Limited PO Box 42
272 Kensington High Street London, W8 6ND
United Kingdom
Read More About This Manual & Download PDF:
References
- Klarstein | Your home. Your kitchen. Your style.
- Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>