KLARSTEIN 10030272 Limelight Range Hood User Manual

May 15, 2024
Klarstein

LIMELIGHT
Range Hood
10030272, 10034975, 10034976, 10034977
10034978, 10041132, 10041133

10030272 Limelight Range Hood

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

KLARSTEIN 10030272 Limelight Range Hood - qr codehttps://use.berlin/10034978

TECHNICAL DATA

Item number| 10030272, 10034975, 10034976, 10034977, 10034978, 10041132, 10041133
---|---
Power supply| 220-240 V ~ 50/60 Hz

Note: You can purchase an activated carbon filter separately for this cooker hood under item number 10035386. Please visit our website: www.hifi- tower.co.uk

SAFETY INSTRUCTIONS

  • Thank you for purchasing this cooker hood. Please read the instruction manual carefully before you use the cooker hood, and keep it in a safe place.
  • The installation work must be carried out by a qualified electrician or competent person. Before you use the cooker hood, make sure that the voltage (V) and the frequency (Hz) indicated on the cooker hood are exactly the same as the voltage and the frequency in your home.
  • The manufacturer and the agent will not bear any responsibility for the damage caused by inappropriate installation and usage.
  • Children under the age of 8 must not use the cooker hood.
  • The appliance is not intended for commercial use, but only for household and similar environments.
  • The cooker hood and its filter mesh should be cleaned regularly in order to keep it in good working order.
  • Before cleaning, switch the power off at the main supply.
  • Clean the cooker hood according to the instruction manual and keep the cooker hood from the danger of burning.
  • Prohibit putting the cooker hood by fire.
  • If the appliance does not function normally, contact the manufacturer or a specialist company.
  • This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • If the range hood is used at the same time as appliances burning gas or other fuels, the room must be adequately ventilated.
  • Do not flambé under the range hood. Accessible parts may become hot when used with cooking appliances.

Important hints on installation

  • The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room).
  • Regulations concerning the discharge of air have to be fulfilled.

Important notes about the extraction mode

WARNING
Risk of poisoning from exhaust gases sucked back. Never operate the device in extraction mode simultaneously with an open flue appliance when there is not adequate airflow guaranteed.

Open flue combustion equipment (for example, gas, oil, wood or coal-fired heaters, tankless water heaters, water heaters) pulls combustion air from the room and runs it through an exhaust pipe or chimney to the outside. In the extraction mode, indoor air is removed from the kitchen and the adjacent rooms – without sufficient air intake this creates a vacuum. Toxic gases from the chimney or extraction flue can thereby be sucked back into the living spaces.

  • Always ensure that a sufficient supply of fresh air is guaranteed and that the air can circulate.
  • An air supply / extractor box alone does not ensure compliance with the limit value.

Safe operation is only possible when the negative pressure in the room where the appliance is located does not exceed 4 Pa (0.04 mbar). This can be achieved when the air required for combustion can flow through openings that are not closable, for example in doors, windows, in conjunction with an air supply / extractor box or through other technical measures. In any case, consult a qualified chimney sweep who can assess the entire ventilation of your house and propose appropriate measures for adequate ventilation.
If the hood is used exclusively in the recirculation mode, unrestricted operation is possible.

Important note on disassembly of the device

  • Disassembly is similar to installation/assembly in reverse order.
  • Take a second person to help you during disassembly to avoid injuries.

FOR THE INSTALLER

Connection to the electrical supply network

  • Electrical connections may only be made in accordance with local standards and laws.
  • Make sure that the supply voltage matches the nominal voltage on the nameplate of the device. If this is not the case, do not connect the device.
  • Make sure that cables do not come into contact with the moving parts and are not crushed.
  • The device must be connected to protective earth.

INSTALLATION

  1. The cooker hood should be placed at a distance of 65-75 cm (26-30 inch) from the cooking surface for the best effect. See Pic 1.

  2. Install the hook on a suitable place once the installation height is fixed, and keep it in line. The fixed position of the inside chimney bracket is the place of chimney.

  3. Fix the outside chimney bracket on the outside chimney, and be sure that the inside chimney can be adjusted the height in it freely as well as fixing the extensible pipe.
    Afterwards, install the extensible pipe and chimney on the cooker hood. See Pic 3.

  4. Put the cooker hood on the hook. See Pic 4.

  5. Adjust the height of the inside chimney to the position of the inside chimney bracket and fix on it by screw,after ajusting the position, fix the body with safety screw. See Pic 5.

Note: The two safety vents are positioned on the back casing, with diameter of 6mm.

KLARSTEIN 10030272 Limelight Range Hood - Picture

CONTROL PANEL AND FUNCTIONS

KLARSTEIN 10030272 Limelight Range Hood - CONTROL
PANEL

On/Off To switch the fan on and off.
Light Turning on and off the light.
Speed There are 3 fan levels: Low (1) > Medium (2) > High (3). Each time the

button is pressed, the fan switches up by one stage. The display then shows the speed level (1, 2 or 3).
Timer| The timer is set to 9 minutes. During operation, press this key to set the timer for the motor. The display will successively show 9, 8, 7, 6, until 0. Without input, the display illumination will turn off after 30 seconds.

After connecting power to power, the control panel will be lighted. The light will shut off automatically after 30 seconds if without any operation.

CLEANING AND CARE

Turn off the cooker hood before cleaning and maintenance and unplug the appliance from the wall outlet. The exterior surfaces are susceptible to scratches and stains. Therefore, do not use abrasive cleaners and wipe away any alkaline or acidic residue (lemon juice, vinegar) immediately after cleaning.

Stainless Steel Surfaces
The stainless steel must be cleaned regularly to ensure a long service life. Use stainless steel cleaner. Always wipe along the grain of the stainless steel to prevent scratching.

Control Panel
The control panel can be cleaned with a damp cloth and a mild dishwashing detergent.
Before cleaning, make sure the cloth is clean and well wrung. Use a dry, soft cloth to remove excess moisture after cleaning.

Monthly Cleaning for Grease Filter
Clean the filter every month can prevent any risk of fire. The filter collects grease, smoke and dust, so the filter is directly affecting the efficiency of the cooker hood. If not cleaned, the grease residue (potential flammable) will saturate on the filter. Clean it with household cleaning detergent.

KLARSTEIN 10030272 Limelight Range Hood - Grease
Filter

Installation of the carbon filter

  • Remove the grease filters
  • The charcoal filters are located at both end of the motor. Turn the charcoal filters until they are unscrewed.

Note: The carbon filters should be replaced every 3 – 6 months or if they show signs of damage.

KLARSTEIN 10030272 Limelight Range Hood - carbon
filter

TROUBLESHOOTING

Problem Possible Cause Solution
Light on, but motor does not work The leaf blocked Get rid of the blocking
The capacitor damaged Replace capacitor

The motor jammed
bearing damaged| Replace motor
The internal with of motor off or a bad smell from the motor| Replace motor
Insufficient suction.| The distance between the body and the gas top too long.| Readjust the distance.
Too much ventilation from open doors or windows.| Choose a new place and resemble the machine.
Shake of the body| The leaf damaged and causes shaking| Replace the leaf
The motor is not tightly hanged| Lock the motor tightly
The body is not tightly hanged| Fixed the body tightly

PRODUCT DATA SHEET

Information according to Regulation (EU) No. 65/2014
Measurement and calculation methods according to EN 61591:1997+A1:2006+A2:20 11+A11:2014+A12:2015

Item number| 10030272, 10034975, 10034976, 10034977, 10034978, 10041132, 10041133
---|---
Description| Symbol| Value| Unit
Annual Energy Consumption| AEChood| 15.7| kWh/Year
Energy Efficiency class| | A++|
Fluid Dynamic Efficiency| FDEhood| 35.9|
Fluid Dynamic Efficiency class| | A|
Lighting Efficiency| LEhood| 30.3| Lux/W
Lighting Efficiency class| | A|
Grease Filtering Efficiency| GFEhood| 80.2| %
Grease Filtering Efficiency class| | C|
air fiow at minimum and maximum speed in normal use, intensive or boost excluded| | 203.7 / 600.4| m³/h
air fiow at intensive or boost setting| | –| m³/h
airborne acoustical A-weighted sound power emissions at minimum and maximum speed available in normal use| | 43 / 64| dB
airborne acoustical A-weighted sound power emissions at intensive or boost setting| | –| dB
power consumption in off mode| Po| –| W
power consumption in standby mode| Ps| 0,31| W
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany

Information according to Regulation (EU) No. 66/2014
Measurement and calculation methods according to EN 61591:1997+A1:2006+A2:20 11+A11:2014+A12:2015

Item number| 10030272, 10034975, 10034976, 10034977, 10034978, 10041132, 10041133
---|---
Description| Symbol| Value| Unit
Annual Energy Consumption| AEChood| 15.5| kWh/Year
Time increase factor| f| 0,7|
Fluid Dynamic Efficiency| FDEhood| 35.9|
Energy Efficiency Index| EEIhood| 34.6|
Measured air fiow rate at best efficiency point| QBEP| 252.9| m³/h
Measured air pressure at best efficiency point| PBEP| 255| Pa
Maximum air fiow| Qmax| 565.7| m³/h
Measured electric power input at best efficiency point| WBEP| 49.9| W
Nominal power of the lighting system| WL| 3| W
Average illumination of the lighting system on the cooking surface| Emiddle| 112| Lux
Measured power consumption in standby mode| Po| 0,31| W
Measured power consumption off mode| Ps| 0| W
Sound power level| LWA| 64| dB
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany

NOTES ON ENVIRONMENTAL PROTECTION

  • During cooking, make sure that there is sufficient air supply so that the cooker hood can operate efficiently and with low operating noise.
  • Adjust the fan speed to the amount of steam produced during cooking. Use the intensive mode only when necessary. The lower the fan speed, the less energy is consumed.
  • If large amounts of steam are produced during cooking, select a higher fan speed in good time. If the cooking steam has already dispersed in the kitchen, the cooker hood must be operated longer.
  • Switch off the cooker hood when you no longer need it.
  • Switch off the lighting when you no longer need it.
  • Clean the filter at regular intervals and replace it if necessary to increase the effectiveness of the ventilation system and prevent fire hazards.
  • Always put the lid on when cooking to reduce cooking steam and condensation.

DISPOSAL CONSIDERATIONS

**** If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom

www.klarstein.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals