KAIESS Newest 10.5 Full Screen Ring Light User Manual

June 14, 2024
Kaiess

KAIESS Newest 10.5 Full Screen Ring Light

In the Box

  1. LED key light x1

  2. Desktop stand x1

  3. Phone clip x1

  4. Quick start guide x1

Product Parameters

Model M1
Material Metal+ABS
Key light size 10.1611.61 0 .61 in
Desktop stand height 9.45in – 15.75 in
Phone clip min width 2.49 in
Phone clip max width 3.74 in
Input voltage 5V/2A-4A
Rated power 10W
LED quantity 144
Color temperature 3000K-6000K
CRI 95+
Brightness adjustment 10%-100%
Power mode USB
USB cable length 78.7 in

Installation Guide

  1. Assembling the Desktop Stand
    Loosen the wrist lock counterclockwise, stretch the telescopic rod out, and tighten the wrist lock clockwise.|
    ---|---

Rotate the telescopic rod clockwise to attach it to the screws of the base.

|
---|---
2. Install Key Light

  1. Fasten the key light to the 1 /4 screw on top of the stand.

  2. Loosen the knob to adjust the angle of the light.

  3. Phone Clip

  4. Open the lock of the phone clip, put it on the telescopic rod, and then lock it.

  5. The phone can be rotated 360° degrees.

  6. The max width of the phone clip is 3.74″.

  7. Soft silicone pad keeps your phone from sliding and scratching.

Powered by a SV /2A-4A USB adapter

For safety and better lighting effect, we recommend using SV 2A-4A USB phone adapter output

Controller Description

Turn ON/OFF: Click to turn on, click again to turn off.
Brightness Control: Click to brighten or dim the brightness, touch one time for one level, 10 levels total.
Light Mode: Click to cycle through the three light modes. (Cold light/Natural light/Warm light)

Lighting Effects

  • NATURAL LIGHT

  • COLD LIGHT

  • WARM LIGHT


Safety and Warranty

Important Safety Instructions

  1. In order to get the best light brightness, it is recommended to use a SV 2A adapter.
  2. Do not place the panel light near heat sources or exposed fire sources, such as electric heaters, microwave ovens, ovens, water heaters, stoves, candles, or other places that may generate high tern peratu res.
  3. Avoid using the panel light in a humid environment, and keep it away from chemicals or corrosive powders, liquids, and gases.
  4. The panel light may be interfered with by external sources such as transformers,. motors, or other electronic devices. Keep these disturbed places as far away as possible during use.
  5. This tripod and its accessories may contain some small parts, please keep the product and its accessories out of the reach of children. Children can inadvertently damage its accessories, or swallow small parts that could cause choking or other hazards.
  6. When children and disabled people use this device, close supervision is required.
  7. Use this machine only for its intended use as described in this manual.
  8. Do not disassemble the panel light without permission to avoid a short circuit or other unnecessary personal injuries.
  9. When not using the product for a long time, please place the product in a dust-free, cool, and dry place.
  10. We strive to build our products with the highest attention to detail and craftsmanship.
    However, sometimes there may be occurrences of defects. We are happy to offer a lifetime warranty on all our products as we continue to support our customers and make amazing products. Please contact us if you have any questions about our devices.

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Disclaimer

Please using the item under the guide of the caution/note.

Do not use the item in situations or with equipment that requires extremely high reliability or safety, such as the following:

  • Medical equipment that directly affects human life.
  • Equipment that may result in personal injury (such as equipment directly related to the operation and control of aircraft, ships, railroads, elevators, etc., or equipment that may be subject to constant vibration, such as automotive and marine equipment).

The product is not for use in high-risk activities. The product is not designed or intended for use in hazardous environments requiring fail-safe performance, or for use in any circumstance in which the failure of the product could lead directly to death, personal injury, severe physical or property damage, or that would affect the operation or safety of any medical or life support device (collectively, “High-Risk Activities”).

We expressly disclaims any express or implied warranty of fitness for High- Risk Activities. We does not authorize use of any product in any High-Risk Activities. Any such use is improper and is a misuse of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals