J-TECH DIGITAL JTECH-MV161 4K HDMI 16×1 High Performance Multi Viewer User Manual

USER MANUAL

4K HDMI 16×1 multi- viewer
JTD-2953 | JTECH-MV161

Introduction

JTECH-MV161 is a high-performance multi-viewer unit with 16 HD screen segmentation and seamless switching output. It can display 16 HD digital video signals on the same screen, and has a variety of video segmentation, and seamless switching of 16HD input signals synchronously. The control methods of this unit are flexible; it can be switched via front panel buttons and IR control. This unit is practical and stable, easy to install, and can be used in major projects such as conference rooms, meeting halls, etc.

Remote Control Operation

HDMI output resolution 1080P;
Output resolution switch;
Vertical dual image display mode;
Paralleled dual image display mode;
4 big -12 small display mode;
2 big -6 small display mode;
audio switching;
Display mode switching;
16 Image display mode:
Left & right switching input port
Single image choosing signal input port
2×2 mode: A4:
Choosing 1-4 input port signals; B4:
Choosing 5-8 input port signals; C4:
Choosing 9-12 input port signals; D4:
Choosing 13-16 input port signals;
2×4 mode: A8:
Choosing 1-8 input port signals; B8:
Choosing 9-16 input port signals;
3×3 mode: A9:
Choosing 1-9 input port signal; B9:
Choosing 8-16 input port signals;

Features

• 16 x HDMI Inputs, 1 x HDMI Output
• 16 HDMI signal screen segmentation
• 16 HDMI signal seamless switching
• IR Remote Control
• HDMI 1.4 | HDCP 1.4 | DVI 1.0
• Audio and video superposition
• Clear subtitles

Specifications

3840×2160@30Hz
Input/Output Cable Distance| <15M AWG26 HDMI Standard Cable
Power Adapter Format| Input: AC (50Hz, 60Hz) I 100-240V; Output: DC 12V / 2A
Operating Temp. Range| (-15°C to 55°C) I (5°F to 131°F)
Dimensions (L x W x H)| (460mm x 150mm x 40mm) I (18.1″ x 5.91″ x 1.57″)
Weight| 1.7g

Unit Interface

1: DC/12V — DC/12V power interface
2: HDMI IN8 > HDMI IN1 —Input interface
3: HDMI OUT — Output interface
4: Ethernet — Ethernet interface
5: RS232 — RS232 interface| 6: IR — IR receive
7: Audio — Audio mode switching
8: Video — Video mode switching
9: ON/OFF — Power switch
---|---

Connection Diagram

Common Multi-Viewer Modes

MODE1: Single image display mode (Channel 1-16 seamless switch)
MODE2&MODE3: Dual image display mode
MODE4: Quad display mode
MODE5: 2 big -6 small display mode
MODE6: 8 Image display mode
MODE7: 8 Image display mode (without stretcher strain)
MODE8: 4 big -12 small display mode
MODE9: 16 Image display mode

Operating Steps

Step 1: Connect HDMI Out with display, HDMI Input 1-16 with source devices
Step 2: Connect the Power, and turn on the multi-viewer
Step 3: Please set the resolution of output as 1080P with remote control if the display only supports 1080P

Clearer Subtitles

Application

Package Contents

(1) x JTECH-MV161 Multi-Viewer
(1) x 12V / 2A Power Adapter
(1) x Remote Control
(1) x User Manual

Product Service

1. Damage requiring service: The unit should be serviced by qualified service personnel if:
   (a) The DC power supply cord or AC adapter has been damaged;
   (b) Objects or liquids have gotten into the unit;
   (c) The unit has been exposed to rain;
   (d) The unit does not operate normally or exhibits a marked change in performance; (e) The unit has been dropped or the cabinet damaged.

2. Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

3. Replacement Parts: When parts need replacing, ensure that the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original
   parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4. Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Warranty

If your product does not work properly because of a defect in materials of workmanship, our company (referred to as “the warrantor”) will, for the length of the period indicated as below, “Parts (1) Year, Labor (90) Days”, which starts with the date of original purchase (“Limited Warranty Period”), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.
During the “Labor” limited warranty period, there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service

When shipping the unit, carefully pack and send it prepaid, adequately insured, and preferably in the original carton. Include a letter detailing the complaint and provide a
day time phone and/or email address where you can be reached.

Limited Warranty Limits and Exclusions

This Limited Warranty ONLY COVERS failures due to defects in material or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages that occurred in shipment or failures that are caused by products not supplied by the warrantor, or failures that result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, setup adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributed to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data, or other recorded content. The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICES, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

Extended Warranty

With the registration of supported J-Tech Digital products, you extend the current warranty by 6 months. This extension is added to the warranty that starts at the purchase date of the device supported. Total product warranty with the extended period will equate to a total of 18 months of warranty from the date of purchase.
For extended warranties to be accepted, all warranty extensions must be claimed within 30 days of purchasing the eligible J-Tech Digital product. Extensions attempted to be claimed outside of the 30-day window will not be accepted. Visit www.jtechdigital.com to register your extended warranty.

WWW.JTECHDIGITAL.COM
PUBLISHED BY J-TECH DIGITAL INC.
J-TECH DIGITAL INC.
9807 EMILY LANE
STAFFORD, TX 77477
TEL: 1-888-610-2818
E-MAIL:[email protected]

References

• J-Tech Digital ® Official Site | Professional AV Solution Provider

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>