SUPER BRIGHT LEDS VTAJ-50K20-x Vapor-Proof Jelly Jar Lights User Manual
- June 5, 2024
- super bright leds
Table of Contents
User Manual
VTAJ Series
Important: Read all instructions prior to installation.
Vapor-Proof Jelly Jar Lights
Specifications
| Model | VTAJ-50K20-x |
|---|---|
| Operating Temperature | -40°–113° F (-40°–45° C) |
| IP Rating | IP65 |
Check product label for specific electrical specifications related to
installation.
Improper installation will void warranty.
Safety and Notes
- Product should be installed by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
- To reduce risk of electric shock, ensure main power source and circuit breakers are switched off before performing any installation or wiring procedures.
- Ensure all mounts are securely attached and will support weight of fixture. Failure to properly support fixture may result in damage or injury, for which the manufacturer does not assume responsibility.
Installation
Surface Mount
- Remove junction box section.
- Apply supplied gasket or silicone compound (WFLS-GL1OZ or equivalent) to back of junction box and attach to surface.
- Connect wires according to wiring diagram.
- Reattach fixture to junction box using supplied gasket.
Mounting Using Junction Box Conduit NPT Knockouts
- Remove junction box section.
- Remove 3/4” plug from intended direction of conduit feed. Apply supplied gasket or silicone compound (WFLS-GL1OZ or equivalent) to back of junction box and attach to wall.
- Feed conduit into junction box. Apply silicone compound (WFLSGL1OZ or equivalent) to areas where conduit and junction box meet to create seal.
- Connect wires according to wiring diagram.
- Reattach fixture to junction box using supplied gasket. 5.00in 127mm
Wiring Diagram
Exploded View
Rev Date: V2
01/11/2022
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>