allen – roth KXW7103AX-01 3-Light Pendant Instruction Manual
- June 3, 2024
- Allen+Roth
Table of Contents
allen – roth KXW7103AX-01 3-Light Pendant Instruction
ALLEN + ROTH and logo design are trademarks or registered trademarks of LF,
LLC. All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 866-439-9800, 8 a.m. – 8
p.m., EST, Monday – Sunday. You could
also contact us at partsplus@lowes.com.
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM| POSSIBLE CAUSE| CORRECTIVE ACTION|
Bulb will not light.
| 1. Bulb is burned out.
2. Faulty wire connection.
| 1. Replace light bulb.
2. Check wiring.
CARE AND MAINTENANCE
• Shut off main power before cleaning light with damp cloth or window cleaner. Do not use abrasive cleansers.
WARRANTY
• The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year limited from the date of purchase.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes.
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
- Visit lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Use flashlight or alternate light source to light work area during installation.
- Assistance may be required to support fixture during installation.
CAUTION
- Connect fixture to supply wires rated for at least 167˚F.
- Workable for dimming circuits when using appropriate light bulbs with dimmable function.
PACKAGE CONTENTS
QUICK REFERENCE GUIDE
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- WARNING: Turn off the power and remove existing fixture.
- WARNING: Remove the preassembled cap nuts C from the mounting screws B on mounting plate A. Save for later use. Attach the mounting plate A to outlet box (not included) using outlet box screws AA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>