SUPER BRIGHT LEDS SMDJ2-KIT LED Round Panel Light User Manual
- June 5, 2024
- super bright leds
Table of Contents
SUPER BRIGHT LEDS SMDJ2-KIT LED Round
**Panel Light User Manual**
Safety and Notes
- Product should be installed in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that main power source and circuit breakers are switched off before performing any installation or wiring procedures.
- Ensure all mounts are securely attached and will support weight of the fixture. Failure to properly support the fixture may result in damage or injury, for which the manufacturer does not assume responsibility
Installation Instructions
-
Turn off supply power.
-
Remove existing light and trim from can.
-
Attach spring clips to downlight.
Note: spring clips will need to face inward for 5” cans and face outward for 6” cans -
Connect wiring to E26/E27 adapter and connect ground wire.
-
Screw adapter into socket.
-
Squeeze spring clips together and push light into can making sure it is securely held in place.
Rev Date: V1 10/13/2021
4400 Earth City Expy, St. Louis, MO
63045 866-590-3533
superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>