Super Bright LEDs OW0104G Series LED Bulkhead Light User Manual
- June 5, 2024
- super bright leds
Table of Contents
User Manual
OW0104G Series
Important: Read all instructions prior to installation.
LED Bulkhead Light
Safety and Notes
- The product should be installed and serviced in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
- Avoid looking directly into the lamp when illuminated.
- Ensure all amounts are securely attached and will support the weight of the fixture. Failure to properly support fixtures may result in damage or injury, for which the manufacturer does not assume responsibility.
Installation
- Remove supply power from the intended circuit.
- Attach the mounting bracket to the junction box.
- Mount the light housing base to the mounting bracket.
- Connect wiring.
- Attach outer light housing.
Specifications
Environmental Specifications
Operating Temperature| -13°–104° F(-25°–40° C)
IP Rating| IP54
Check the product labels for specific electrical specifications related to installation. Improper installation will void the warranty.
Rev Date: V1 04/28/2021
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533
superbrightleds.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>