QNAP QMiroPlus-201W Router Installation Guide
- June 5, 2024
- QNAP
Table of Contents
QNAP QMiroPlus-201W Router
WHAT IS IN BOX
-
Setup your QMiroPlus-201W
-
2.5” HDD / SSD****
-
SSD/HDD
Please visit https://www.qnap.com/compatibility to check the compatibility list of SSD. -
All the drive data will be cleared upon SSD / HDD initialization****
-
Use RJ45 Cable connecting to ISP modem.****
-
Setup your QMiro****
Getting Started
Install QNAP QuRouter App, by scanning QR code printed on packaging label, or search for QNAP QuRouter in the Google Play Store or Apple App Store
Blinking Blue:
|
Your QMiro/QMiroPlus is ready to setup
---|---
Solid Blue
|
Connection is good
Solid Red
| (QMiro only) QMiro is unable to connect to other QMiroPlus, please place your QMiro closer to QMiroPlus
Solid White
|
System is starting up
Download Center
www.qnap.com/download
Visit Download Center for our full guides and utilities.
FCC Statment
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device maynot cause harmful
interference, and (2) This device must accept any interference received,
including interference that maycause undesired operation. This equipment has
been tested and complies with the Class B digital device limits, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used according to the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference cannot occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by taking one of the following actions:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. RF
Modules installed in this product must not be co-located or operating in
conjunction with any other antenna or transmitters, except when installed in
accordance with FCC multi-transmitter product guidelines.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled environments. This equipment must be installed and operated with
a minimum distance of 20cm between the radiator/antennas and the general
public This device complies with CE compliance Class B.
CE Marking
The equipment described in this document faithfully complies with: European
Union Radio Equipment Directive (RED) 2014/53/EU. The Declaration of
Conformity is provided to customers with other technical documents upon
request and is accessible from https://www.qnap.com/en/contact-us/ to
authorized users. Radiation exposure statement This equipment complies with
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between
the radiator and your body. For operation within 5.15 ~ 5.35GHz frequency
range, it is restricted to indoor environment.
The equipment is stationary, and fixed to be using in conjunction with the
termination of end user terminal
Hereby, QNAP Systems, Inc. declares that the radio equipment type QMiro-201W
/QMiroPlus-201W is in compliance with Directive 2014/53/EU.The full text of
the EU declaration of conformity is available at the following internet
address: https://www.qnap.com
ISED Compliance Statement
Note: Industry Canada has been renamed Innovation, Science, and Economic
Development Canada (ISED) following the issue of RSP-100 Issue 11 and DC-01
Issue 06. Equipment certifications previously issued
by Industry Canada remain valid and do not require updating. Meaning you may
see the names used interchangeably in documentation. The following statement
is applicable to ASiR-pRRH which has Innovation, Science and Economic
Development (ISED) approval: This device complies with ICES-003 of Industry
Canada’s license-exempt RSSs. Operation is subject to the following two
conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
This product comply with IC radiation exposure limits set forth for an
uncontrolled environment. To comply with RSS 102 RF exposure compliance
requirements, a separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons.
The device for the band 5150-5350 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
RED 2014/53/EU Article 10 Compliance
RED 2014/53/EU requires that for products which could potentially have an
issue with a non-harmonized frequency in a specific EU country, the product
documentation must list the restrictions, and the packaging must carry a label
reflecting that country’s code.
EU RoHS statement
This equipment complies with the European Union RoHS Directive 2011/65/EU on
the restriction of the use of certain hazardous substances in electrical and
electronic equipment. The directive applies to the use of lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and
polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment.
References
- download.qnap.com
- Contact Us | QNAP
- Customer Service - QNAP
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Download Center | QNAP (US)
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Compatibility List - QNAP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>