QNAP 201W QMiroPlus Wireless Router Installation Guide
- June 5, 2024
- QNAP
Table of Contents
- What’s In The Box?
- Setup your QMiroPlus-201W
- 2.5” HDD / SSD
- Check Compatibility
- Power On/Off
- Use RJ45 Cable connecting to ISP modem.
- Radio Information for CE
- Getting Started
- Connect a PC for QMiroPlus-201W setup
- Download Center
- FCC Compliance Statement
- ISED Compliance Statement
- Radiation Exposure Statement
- RED 2014/53/EU Article 10 Compliance
- EU RoHS statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**QNAP 201W QMiroPlus Wireless Router Installation Guide
**
What’s In The Box?
Setup your QMiroPlus-201W
2.5” HDD / SSD
Check Compatibility
SSD/HDD
Please visit https://www.qnap.com/compatibility to check the compatibility list of SSD.
All the drive data will be cleared upon SSD / HDD initialization.
Power On/Off
Use RJ45 Cable connecting to ISP modem.
Radio Information for CE
Frequency band(s) in which the radio equipment operates
BT:2402MHz-2480MHz
WLAN 2.4G: 2412MHz-2472MHz
WLAN 5G:5150MHz-5850MHz
Maximum tune-up e.i.r.p
BT:7.5dBm
WLAN 2.4GHz:20dBm
RLAN 5GHz(5150MHz-5350MHz, 5470MHz-5725MHz): 30dBm
Fixed broadband data transmitting systems(5725 MHz ~ 5850 MHz):25dBm
Getting Started
Install QNAP QuRouter App, by scanning QR code printed on packaging label, or search for QNAP QuRouter in the Google Play Store or Apple App Store
Note: Need press power button boot up NAS(QTS) for device LED status
Connect a PC for QMiroPlus-201W setup
The default IP address of QMiroPlus-201W web management is 192.168.100.1
Download Center
Visit Download Center for our full guides and utilities.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and complies with the Class B digital device limits, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference cannot occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by taking one of the following actions:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF Modules installed in this product must not be co-located or operating in conjunction with any other antenna or transmitters, except when installed in accordance with FCC multi-transmitter product guidelines.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for uncontrolled environments. This equipment must be installed and operated with a minimum distance of 21cm between the radiator/antennas and the general public
This device complies with CE compliance Class B.
CE Marking
The equipment described in this document faithfully complies with: European
Union Radio Equipment Directive (RED) 2014/53/EU. The Declaration of
Conformity is provided to customers with other technical documents upon
request and is accessible from https://www.qnap.com/en/contact-us/ to
authorized users. Radiation exposure statement This equipment complies with
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 21 cm between
the radiator and your body. For operation within 5.15 ~ 5.35GHz frequency
range, it is restricted to indoor environment.
The equipment is stationary, and fixed to be using in conjunction with the termination of end user terminal
Hereby, QNAP Systems, Inc. declares that the radio equipment type QMiro 201W/QMiroPlus201W is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.qnap.com
ISED Compliance Statement
Nbote: Industry Canada has been renamed Innovation, Science, and Economic Development Canada (ISED) following the issue of RSP-100 Issue 11 and DC-01 Issue 06. Equipment certifications previously issued by Industry Canada remain valid and do not require updating. Meaning you may see the names used interchangeably in documentation. The following statement is applicable to ASiR-pRRH which has Innovation, Science and Economic Development (ISED) approval: This device complies with ICES-003 of Industry Canada’s license- exempt RSSs. Operation is subject to the following two conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Radiation Exposure Statement
This product comply with IC radiation exposure limits set forth for an uncontrolled environment. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 21 cm must be maintained between the antenna of this device and all persons.
The device for the band 5150-5350 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
RED 2014/53/EU Article 10 Compliance
RED 2014/53/EU requires that for products which could potentially have an issue with a non-harmonized frequency in a specific EU country, the product documentation must list the restrictions, and the packaging must carry a label reflecting that country’s code.
EU RoHS statement
This equipment complies with the European Union RoHS Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The directive applies to the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment
References
- download.qnap.com
- Contact Us | QNAP
- Customer Service - QNAP
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Download Center | QNAP (US)
- Essentials | Utilities | QNAP (US)
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Compatibility List - QNAP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>