QNAP QDA-UMP4 M.2 PCIe NVMe SSD to U.2 Adapter User Guide
- June 4, 2024
- QNAP
Table of Contents
QNAP QDA-UMP4 M.2 PCIe NVMe SSD to U.2 Adapter
Package Contents
All the drive data will be cleared upon SSD / HDD initialization
INSTRUCTIONS
Software Support
Visit Download Center for our full guides and utilities.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Class B Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- I ncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
Modifications:
Any modifications made to this device that are not approved by QNAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this
equipment.
This QNAP device complies with CE compliance Class B.
According to the requirement of the WEEE legislation the following user
information is provided to customers for all branded QNAP Electronics products
subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
www.qnap.com/regulatory
www.qnap.com
service.qnap.com
download.qnap.com
http://www.qnap.com/compatibility
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>