QNAP QSW-1108-8T Network to 2.5GbE Connectivity Installation Guide
- June 3, 2024
- QNAP
Table of Contents
QNAP QSW-1108-8T Network to 2.5GbE Connectivity
WHAT’S IN THE BOX
Specifications
| 1. Loop indicator | 4. 2.5GbE RJ45 ports |
|---|---|
| 2. Power LED | 5. Power input |
| 3. 2.5GbE ports status |
LED Behavior
| LED | Status | Description |
|---|
Power
| Green| Device is on
Off| Device is off
Loop indicator
| Off| No loop
Red and flashing
with looping ports
| Loop occurs
2.5GbE ports status
| ****
Green
| Link is operating at 2.5 Gbps Flashing: link up and data transfer Off: no link
Flashing with loop indicator: port loop and
blocked by loop protection
Amber
| Link is operating at 1G/100M/10M bps
Flashing: link up and data transfer Off no link
Flashing with loop indicator: port loop and
blocked by loop protection
CONNECTIONS
FCC STATMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Class B Notice:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
Modifications:
Any modifications made to this device that are not approved by QNAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this
equipment.
This QNAP device complies with CE Compliance Class B. According to the
requirement of the WEEE legislation, the following user information is
provided to customers for all branded QNAP products subject to the WEEE
directive. This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household waste. Instead, it
is your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service, or the shop where you purchased the product.
Documents / Resources
| QNAP
QSW-1108-8T Network to 2.5GbE
Connectivity
[pdf] Installation Guide
QSW-1108-8T Network to 2.5GbE Connectivity, QSW-1108-8T, Network to 2.5GbE
Connectivity, Network Connectivity, Network to 2.5GbE
---|---
References
- download.qnap.com
- Cloud Install
- Customer Service - QNAP
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance