QNAP QMiroPlus-201W Tri-Band Mesh Wi-Fi Satellite Installation Guide
- June 5, 2024
- QNAP
Table of Contents
QMiro-201W / QMiroPlus-201W
**Quick Installation Guide
**
QMiroPlus-201W Tri-Band Mesh Wi-Fi Satellite
QMiro-201W
QMiroPlus-201W
Setup your QMiroPlus-201W
2.5” HDD / SSD
Use RJ45 Cable connecting to ISP modem.
Setup your QMiro
Getting Started
Install QNAP QuRouter App, by scanning the QR code printed on the packaging
label, or search for QNAP QuRouter in the Google Play Store or Apple App Store
Blinking Blue: | Your QMiro/QMiroPlus is ready to setup |
---|---|
Solid Blue | Connection is good |
Solid Red | (QMiro only) QMiro is unable to connect to other QMiroPlus, please |
place your QMiro closer to QMiroPlus
Solid White| The system is starting up
Download Center
www.qnap.com/download
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and complies with the Class B digital device limits, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference cannot occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by taking one of the following actions:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. RF
Modules installed in this product must not be co-located or operating in
conjunction with any other antenna or transmitters, except when installed in
accordance with FCC multi-transmitter product guidelines.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled environments. This equipment must be installed and operated with
a minimum distance of 21cm between the radiator/antennas and the general
public
This device complies with CE compliance Class B.
CE Marking
The equipment described in this document faithfully complies with: European
Union Radio Equipment Directive (RED) 2014/53/EU. The Declaration of
Conformity is provided to customers with other technical documents upon
request and is accessible from https://www. qnap.com/en/contact-us/ to
authorized users. Radiation exposure statement This equipment complies with
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance 21 cm
between the radiator and your body. For operation within the 5.15 ~ 5.35GHz
frequency range, it is restricted to the indoor environment.
The equipment is stationary and fixed to be used in conjunction with the
termination of the end-user terminal
Hereby, QNAP Systems, Inc. declares that the radio equipment type QMiro-
201W/QMiroPlus201W is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: https://[www.qnap.com](http://www.qnap.com)
ISED Compliance Statement
Note: Industry Canada has been renamed Innovation, Science, and Economic Development Canada (ISED) following the issue of RSP-100 Issue 11 and DC-01 Issue 06. Equipment certifications previously issued by Industry Canada remain valid and do not require updating. This means you may see the names used interchangeably in the documentation. The following statement is applicable to ASiR-pRRH which has Innovation, Science, and Economic Development (ISED) approval: This device complies with ICES-003 of Industry Canada’s license- exempt RSS. Operation is subject to the following two conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme a la nomre ICES-003 du CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage. 2. L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement
This product complies with IC radiation exposure limits set forth for an
uncontrolled environment. To comply with RSS 102 RF exposure compliance
requirements, a separation distance of at least 21 cm must be maintained
between the antenna of this device and all persons.
The device for the band 5150-5350 MHz is only for indoor usage to reduce the
potential for harmful interference to co-channel mobile satellite systems.
**** According to the requirement of the WEEE legislation, the following user
information is provided to customers for all branded QNAP Electronics products
subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
RED 2014/53/EU Article 10 Compliance
RED 2014/53/EU requires that for products that could potentially have an issue
with a non-harmonized frequency in a specific EU country, the product
documentation must list the restrictions, and the packaging must carry a label
reflecting that country’s code.
AT | BE | BG | HR | CY | CZ | DK |
---|---|---|---|---|---|---|
EE | Fl | FR | DE | EL | HU | IE |
IT | LV | LT | LU | MT | NL | PL |
PT | RO | SK | SI | ES | SE | UK |
EU RoHS statement
This equipment complies with the European Union RoHS Directive 2011/65/EU on
the restriction of the use of certain hazardous substances in electrical and
electronic equipment. The directive applies to the use of lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and
polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment.
service.qnap.com
download.qnap.com
P/N: 51000-024823-RS
SSD/HDD
Please visit
https://[www.qnap.com/compatibility](http://www.qnap.com/compatibility)
to check the compatibility list of SSD.
References
- download.qnap.com
- Contact Us | QNAP
- Customer Service - QNAP
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Download Center | QNAP (US)
- QNAP (US) | Experts in NAS, Networking, and Smart Surveillance
- Compatibility List - QNAP