QNAP TL-R1200PES-RP JBOD Enclosure Installation Guide

May 15, 2024
QNAP

QNAP-LOGO

QNAP TL-R1200PES-RP JBOD Enclosure

QNAP-TL-R1200PES-RP-JBOD-Enclosure-PRODUCT

Product Information

Specifications:

  • Models: TL-R1200PES-RP, TL-R1600PES-RP, TL-R2400PES
  • Supports: JBOD Enclosure
  • Drive Compatibility: 2.5″ SSD/HDD, 3.5″ HDD
  • Optional Accessories: QXP-3X4PES, CAB-PCIE10M-8644-4X,QXP-3X8PES, CAB-PCIE10M-8644-8X, RAIL-B02, RAIL-A02-90
  • Compatibility List: SSD/HDD Compatibility,PCIe JBOD Compatibility
  • Download Center: Download Center

Product Usage Instructions

Connection to NAS:
To connect a PCIe JBOD enclosure to the NAS, follow these steps:

  1. Install a QXP PES expansion card on the NAS.
  2. Use a supported cable for connection.

Compatibility:
Ensure that your NAS BIOS version is QTS 5.1.2+ or QuTS hero h5.1.2+ for compatibility with JBOD enclosures.

Modifications Warning:
Any modifications not approved by QNAP Systems, Inc. may void the FCC authorization to operate the equipment.

Compliance Information:
This device complies with CE Class A standards and UKCA requirements for products sold in Great Britain. For more regulatory information, visit Regulatory Compliance Page.

Battery Warning:
This product contains a button battery. Keep batteries away from children and seek immediate medical attention if swallowed or inserted into the body.

FAQ:

Q: How do I check the compatibility of my drives with the JBOD enclosure?
A: Visit the SSD/HDD compatibility list at here to verify the compatibility of your drives.

Q: What should I do if I encounter interference issues with the device?
A: Ensure that the device is not causing harmful interference and accepts any received interference. If issues persist, contact customer support.

PACKAGE CONTENT

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(1\)

Optional Accessories

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(2\)

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(10\)

SSD/HDD
http://www.qnap.com/compatibility

All the drive data will be cleared upon SSD / HDD initialization

Tighten the screws to prevent the tray from getting stuck to the chassis.

INSTRUCTION

TL-R1200PES-RP / TL-R1600PES

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(5\)

TL-R2400PES-RP

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(7\)

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(11\)

PCIe JBOD compatibility list
https://www.qnap.com/go/compatibility-expansion/pcie

To connect a PCIe JBOD enclosure to the NAS, you must install a QXP PES expansion card on the NAS and use a supported cable.

ASSEMBLY

QNAP-TL-R1200PES-RP-JBOD-Enclosure-FIG- \(8\)

https://www.qnap.com/go/compatibility-expansion/pcieQNAP-TL-R1200PES-RP-
JBOD-Enclosure-FIG- \(9\)

Download Center
www.qnap.com/download

Visit Download Center for our full guides and utilities.

FCC

conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.

This device complies with CE compliance Class A.
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Office in EU; QNAP GmbH,Karl-Arnold-Straße 26, 47877 Willich, Germany

Office in UK;
QNAP Ltd,
2 Drakes Meadow, Swindon SN3 3LL United Kingdom

This device complies with the UKCA requirements for products sold in Great Britain.

THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours. Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.

install.qnap.com
service.qnap.com
download.qnap.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals