Nedis WIFILN51CRGB Wi-Fi Outdoor Neon-style LED Strip User Manual

: June 5, 2024
: nedis

WIFILN51CRGB Wi-Fi Outdoor Neon-style LED Strip

$Preface Thank you for purchasing the Nedis WIFILN51CRGB. This document is the user manual and contains all the information for correct, efficient and safe use of the product. This user manual is addressed to the end user. Read this information carefully before installing or using the product. Always store this information with the product for use in the future. Product description Intended use This product is a Smart Wi-Fi LED strip with a wireless remote control. The product is not intended for professional use. The product is intended for indoor use only. Any modification of the product may have consequences for safety, warranty and proper functioning. Specifications Product Wi-Fi Outdoor Neon-style LED strip Article number WIFILN51CRGB LED strip LED strip length 5 m LED strip width 17 mm Brightness 960 lm Light colour RGB LED type 5050 LED quantity 60 /m Connection NEMO Power 32 W Waterproof IP65 Working temperature -20 °C – 50 °C Controller Dimensions 70 x 30 x 15 mm Input voltage 24 V Max. current 1.5 A Rated power 36 W Frequency range 2412 - 2484 MHz Max. transmit power 16 dBm Waterproof IP44 Main parts $image A$ 210362 WIFILN51CRGB-LEDstrip_Main parts2.ai A 1 LED strip 2 Mounting bracket $10x$ 3 Screws $20x$ 4 Power adapter 5 NEMO connector 6 IR receiver 7 Remote control Remote control $image B$ 210362 WIFILN51CRGB- LEDstrip_Main parts-Remote.ai B 1 Music mode 2 Mode buttons 3 Speed buttons 4 Brightness buttons 5 Colour buttons 6 Start/stop moving pattern 7 Power button Safety instructions WARNING Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference. Only use the product as described in this document. Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately. Do not drop the product and avoid bumping. Do not unplug the product by pulling on the cable. Always grasp the plug and pull. This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock. Always keep button cell batteries, both full and empty, out of reach of children to avoid the chance of swallowing. Dispose of used batteries immediately and safely. Button cell batteries can cause serious internal chemical burns in as little as two hours when swallowed. Keep in mind that the first symptoms may look like child diseases like coughing or drooling. Seek immediate medical attention when you suspect that batteries have been swallowed. Only power the product with the voltage corresponding to the markings on the product. Non-rechargeable batteries are not to be recharged. Do not short-circuit a battery. Make sure to match the $+$ and $-$ polarity markings. For more detailed information about disposal of your old battery, check the local rules and regulations for the correct disposal instructions. Explanation of the symbols on the product or packaging Icon Description Electrical Class 1.png Product in which protection against electric shock does not rely on basic insulation only, but which includes an additional safety precaution in such a way that means are provided for the connection of conductive parts $which are not live parts$ to the protective $earthing$ conductor in the fixed wiring in such a way that these parts cannot become live in the event of a failure of the basic insulation. CE.ai Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility $EMC$ or low-voltage equipment. Installation Check the contents of the package Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com. Installing the app 1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store. 2. Open the Nedis Smartlife app on your phone. 3. Create an account with your e-mail address and tap Continue. 4. Enter the received verification code. 5. Create a password and tap Done. 6. Tap Add Home to create a SmartLife Home. 7. Set your location, choose the rooms you want to connect with and tap Done. Connecting the product 1. Screw the NEMO connector A5 onto the power adapter A4. 2. Tap + in the top right corner in the Nedis SmartLife app. 3. Plug A4 into a power outlet. 4. Under Search Device, select the product from the list of available devices. 5. Check if the LED strip A1 is blinking. If so, confirm in the app. If A1 does not blink, unplug and replug A4 from the power source three times until A1 starts to blink. 6. Rename the product after it has been found and added. 7. Enter the password of the Wi-Fi network to which your phone is connected and tap Confirm. Setting up the product 1. Unplug A4 from the power outlet. 2. Place the start of A1 in the desired position. Make sure the power outlet is within reach. 3. Place A1 using the included mounting brackets A2 and screws A3, or use suitable adhesive. Evenly space A2 to support A1. Do not bend A1 at sharp angles to prevent damage. If desired, cut A1 to size. Cutting A1 removes the waterproof qualities of the product. Shield the cut side of the LED strip A1 to make it waterproof for outdoor use. 4. Plug A4 into a power outlet. Use Controlling the product Press B7 to switch the product on or off. Press the mode button B2 to change modes. Press the brightness buttons B4 to adjust the brightness. Press the colour buttons B5 to adjust the colour. Press the speed buttons B3 to adjust the speed. The product can be connected to Google Home or Amazon Alexa to enable speech control. Maintenance Before cleaning and maintenance, switch off the product and disconnect the power. Let the product cool down. Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface. Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product. Warranty Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product. This product is designed for private use $normal domestic use$ only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product. Disclaimer Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such. Disposal WEEE.png This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment. Declaration of Conformity We, NEDIS, as manufacturer, declare that product WIFILN51CRGB from the brand Nedis, produced in China was tested according to all relevant CE standards / regulations and passed all tests. The complete Declaration of Conformity $ + safety datasheet if applicable $ can be found and downloaded via http://webshop.nedis.com For other compliant-related information, please contact customer service desk for support: via website: http://www.nedis.com via e-mail: service@nedis.com via telephone: +31 $0$73-5991055 $during office hours$ NEDIS B.V., De Tweeling 28, 5215 MC ’s-Hertogenbosch, THE NETHERLANDS$

User Manual

Preface

Thank you for purchasing the Nedis WIFILN51CRGB.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

This product is a Smart Wi-Fi LED strip with a wireless remote control.

The product is not intended for professional use.

The product is intended for indoor use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Wi-Fi Outdoor Neon-style LED strip

---|---

Article number

|

WIFILN51CRGB

LED strip

LED strip length

|

5 m

LED strip width

|

17 mm

Brightness

|

960 lm

Light colour

|

RGB

LED type

|

5050

LED quantity

|

60 /m

Connection

|

NEMO

Power

|

32 W

Waterproof

|

IP65

Working temperature

|

-20 °C – 50 °C

Controller

Dimensions

|

70 x 30 x 15 mm

Input voltage

|

24 V

Max. current

|

1.5 A

Rated power

|

36 W

Frequency range

|

2412 – 2484 MHz

Max. transmit power

|

16 dBm

Waterproof

|

IP44

Main parts (image A)

A

1. LED strip

2. . Mounting bracket (10x)

3. Screws (20x)

4. Power adapter

5. NEMO connector

6. IR receiver

7. Remote control

Remote control (image B)

B

1. Music mode

2. Mode buttons

3. Speed buttons

4. Brightness buttons

5. Colour buttons

6. Start/stop moving pattern

7. Power button

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Always keep button cell batteries, both full and empty, out of reach of children to avoid the chance of swallowing. Dispose of used batteries immediately and safely. Button cell batteries can cause serious internal chemical burns in as little as two hours when swallowed. Keep in mind that the first symptoms may look like child diseases like coughing or drooling. Seek immediate medical attention when you suspect that batteries have been swallowed.
Only power the product with the voltage corresponding to the markings on the product.
Non-rechargeable batteries are not to be recharged.
Do not short-circuit a battery.
Make sure to match the (+) and (-) polarity markings.
For more detailed information about disposal of your old battery, check the local rules and regulations for the correct disposal instructions.

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Product in which protection against electric shock does not rely on basic insulation only, but which includes an additional safety precaution in such a way that means are provided for the connection of conductive parts (which are not live parts) to the protective (earthing) conductor in the fixed wiring in such a way that these parts cannot become live in the event of a failure of the basic insulation.

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

Installation

Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Installing the app

1. Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.

2. Open the Nedis Smartlife app on your phone.

3. Create an account with your e-mail address and tap Continue.

4. Enter the received verification code.

5. Create a password and tap Done.

6. Tap Add Home to create a SmartLife Home.

7. Set your location, choose the rooms you want to connect with and tap Done.

Connecting the product

1. Screw the NEMO connector A5 onto the power adapter A4.

2. Tap + in the top right corner in the Nedis SmartLife app.

3. Plug A4 into a power outlet.

4. Under _ Search Device , _select the product from the list of available devices.

5. Check if the LED strip A1 is blinking. If so, confirm in the app.

If A1 does not blink, unplug and replug A4 from the power source three times until A1 starts to blink.

6. Rename the product after it has been found and added.

7. Enter the password of the Wi-Fi network to which your phone is connected and tap Confirm.

Setting up the product

1. Unplug A4 from the power outlet.

2. Place the start of A1 in the desired position.

Make sure the power outlet is within reach.

3. Place A1 using the included mounting brackets A2 and screws A3, or use suitable adhesive.

Evenly space A2 to support A1.
Do not bend A1 at sharp angles to prevent damage.
If desired, cut A1 to size.
Cutting A1 removes the waterproof qualities of the product.
Shield the cut side of the LED strip A1 to make it waterproof for outdoor use.

4. Plug A4 into a power outlet.

Use

Controlling the product

Press B7 to switch the product on or off.
Press the mode button B2 to change modes.
Press the brightness buttons B4 to adjust the brightness.
Press the colour buttons B5 to adjust the colour.
Press the speed buttons B3 to adjust the speed.

The product can be connected to Google Home or Amazon Alexa to enable speech control.

Maintenance

Before cleaning and maintenance, switch off the product and disconnect the power. Let the product cool down.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, NEDIS, as manufacturer, declare that product WIFILN51CRGB from the brand Nedis, produced in China was tested according to all relevant CE standards / regulations and passed all tests.

The complete Declaration of Conformity ( + safety datasheet if applicable ) can be found and downloaded via http://webshop.nedis.com

For other compliant-related information, please contact customer service desk for support:

via website: http://www.nedis.com

via e-mail: service@nedis.com

via telephone: +31 (0)73-5991055 (during office hours)

NEDIS B.V., De Tweeling 28,

5215 MC ’s-Hertogenbosch, THE NETHERLANDS