Awdun Technology E100 True Wireless Stereo Earphones User Manual
- June 6, 2024
- Awdun Technology
Table of Contents
E100
TRUE WIRELESS STEREO EARPHONES
USER MANUAL
OVERVIEW
Choose Ear TIPS
It is recommended you try middle EarTips first, it fits most people
(For first time pairing)
Take out both two Earphones, then re-insert them into the case to activate the
earphones
Notes: If Earphones fail to be charged, pis charge the case via USB cable
(for details, pis follow the below steps)
How to Pair
Put both Earphones into charging case to activate them, then take out, both Earphones will auto power on and pair with each other After the LED for left Earphone turns blue and red, right Earphone turns blue Search E100 on mobile phone and connect it
- Put the earphone back to the charging case to charging mode, LED solid red
- Press and hold on both earphones for 8s, until the LED blue blink 4 times then back to LED red
- Take them out, two earphones will auto pair with each other
Two Earphones will auto pair with each other
When the LED on the right Earphone turns blue and red, The left Earphone turns
blue, which means both sides connected successfully
Search forE100 on mobile phone and connect it
FUNCTIONS
Power-on
Method 1: take earphones out from the charging case and they will auto power
on (LED solid blu(Make sure there has power in charging case)
Method 2: Power off earphones and hold MFB for 2s to power on (LED glows solid
blue)
Power-off
- Put earphones back into the charging case, it will auto power off (red LED will turn on for l s)
- Hold MFB for 3s ( red LED will turn on for ls)
Reject Call
Press and Hold MFB for 2s to reject the incoming call
Answer Call
Press MFB to answer the incoming call and again to end it
Switch Audio Output
During the call, press and hold MFB for 2s to switch the audio output between
mobile phone and earphones
Mute-
on/off
During the call, double press MFB to switch mute on/off
Play/ Pause
When listening to music, press FB once to play/pause
Skip Track Forward /backward
During playing, double press MFB on right Earphone to next song, double press
MFB on left Earphone to the last song
Voice Assistant
When standby, press and hold MFB for 2s to activate voice assistant (like
Siri）
Charge the Earphones
Insert the earphones into the charging case LED will be solid red when
charging, after full charge, turn to blue for1 min, then turn off
Charge the case
Please charge the case via USB cable, White LED flashes when charging, turn to
solid White when fully charged, When the low battery, blue LED flashes
PRODUCT PARAMETER
Model: E100
Operation Range: 10m (with no obstacle)
Bluetooth version: V5.0
Charging time: approx 2hr
Music time: approx 4 hr
Battery Type: Li-ion
Bluetooth Profiles: HFP/HSP/A2DP/AVRCP
Battery capacity (earphones): 3 7V/ 40mAH
Battery capacity (charging case): 3.7V/ 600 m AH
(All technical data shall be subject to practical performance.)
Notes: Please arrange using time properly as your hearing may be damaged
by using the device for a long time
TIPS
- B e f o r e using the Earphones, please read the manual carefully and keep it for future references
- The Earphones need to be fully charged prior to first-time use
- If the Earphone s is left unused for over two weeks, please recharge them periodically
- Please use the chargers made by a qualified manufacturer
- If the Earphones cannot be found on your phone, please check whether it is in pairing mode; if left unconnected for a long while, the Earphone s will exit pairing mode, please e-enter the mode, if a procedure e r r o r of your phone occurs, reboot it; if a procedure error of the Earphones occurs, reboot or reset it
WARNING
- Never disassemble or modify your Earphones for any reason to avoid any damages and danger
- Do not store the Earphones in extreme temperatures (under O to 45)
- Avoid using the indicator close to the eyes of children or animals
- Do not use these Earphones during a thunderstorm to avoid irregular function and increased risk of electric shock
- Do not use harsh chemicals or strong detentes to clean the Earphones
- Keep the Earphones dry
FCCCaution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
MADE IN CHINA
Documents / Resources
|
Awdun Technology E100 True Wireless Stereo
Earphones
[pdf] User Manual
E100, 2A2XT-E100, 2A2XTE100, E100 True Wireless Stereo Earphones, True
Wireless Stereo Earphones
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>