BRESSER 7007410000000 MA Digital Hygrometer with Mould Alert Instruction Manual

BRESSER 7007410000000 MA Digital Hygrometer with Mould Alert

Imprint

Bresser GmbH Gutenbergstr. 2  46414 Rhede Germany www.bresser.de

For any warranty claims or service enquiries, please refer to the information on “Warranty” and “Service” in this documentation. We apologize for any inconvenience caused by the fact that we cannot process enquiries or submissions sent directly to the manufacturer’s address. Errors and technical changes excepted. © 2021 Bresser GmbH All rights reserved.
The reproduction of this documentation – even in extracts -in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited. The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the European Union and/or other countries.

Features

• Mould warning per alarm, ventilation indicator
• Hygrometer and thermometer
• 24-hours history for humidity and temperature
• Information for a healthy and safety indoor climate.
• Inside temperature display (0 to 50 °C)
• Dew point temperature display (0 to 50 °C)
• Humidity display (20% to 95%)
• Temperature format selection (°C/°F)
• Touch control panel

About this Instruction Manual

NOTICE

• These operating instructions are to be considered a component of the device.
• Read the safety instructions and the operating manual carefully before using this device.
• Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

General safety instructions

Danger of suffocation!

Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!

Risk of an electric shock!

• This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.
• Never leave children unattended when handling the device! Follow the instructions carefully and do not at-tempt to power this device with anything other than power sources recommended in this instruction manual, otherwise there is a danger of an electric shock!

Explosion hazard!

• Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.
• Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion!

Danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

• •Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Ser-vice Center and can arrange the return of this device for repair if necessary.
• Do not immerse the unit in water!
• Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive humidity. This can result in malfunctions, short-circuits or damage to the batteries and components.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or types or with different capacities. Remove batteries from the device if it is not to be used for a longer period of time!
• Do not use rechargeable AA batteries, as these will not give out the correct voltage for use.

Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

Bresser GmbH Gutenbergstr. 2 46414 Rhede Germany www.bresser.de
For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We apologize for any inconvenience caused by the fact that we cannot process enquiries or submissions sent directly to the manufacturer’s address. Errors and technical changes excepted. © 2021 Bresser GmbH All rights reserved.

The reproduction of this documentation – even in extracts -in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the European Union and/or other countries.

Parts overview and scope of delivery

activated
5| C/F touch button (change between °C and

°F, value setting downwards or alarm setting)

| 6| MAX.MIN touch button (change between maximum and minimum value display or delete all values)
7| Battery compartment cover| 8| Battery compartment
9| stand clip (removable)|  |

Scope of delivery

Thermo/Hygrometer (A), stand clip (B) Recommended batteries (not included) 2 pcs. Micro batteries (1.5V, AAA type)

Screen display

be displayed when dew point level is reached)
---|---|---|---
9| MIN symbol (will be dis- played when lowest value is reached)| 10| ALERT symbol (will be displayed on alarm setting)
11| MAX symbol (will be displayed when the highest value is reached)| 12| Temperature value (dis- play mode selectable)
13| Temperature unit (°C or

°F selectable)

| 14| Indoor climate indicator

Setting up power supply

1. Remove the stand clip.
2. Remove the battery compartment cover.
3. Insert the batteries into the battery compartment. En-sure that the battery polarity (+/-) is correct.
4. Replace the battery compartment cover.
5. Re-attach the stand clip.

Automatic measurement display

• Measurements for the indoor area will be displayed on the device once power supply was enabled.

Mould alert

1. In normal display mode, touch the C/F touch button for approx. 3 seconds to switch to mold alert settings mode. MOULD ALERT and humidity display will flash.
2. Touch the C.F/UP or MAX.MIN/DOWN touch button to set the desired value. Possible values: 60%, 65%, 70%or 75%.
3. Touch the C/F touch button again for approx. 3 seconds to save the settings. A Mould alert will be triggered if the humidity will reach the set value.
4. “Light signal when the alarm is activated” will flash and MOULD ALERT will be displayed on the screen until the humidity drops below the set value again.

Humidity alert

1. In normal display mode, touch the SET/DEW POINT touch button for approx. 3 seconds to switch to humidity alert settings mode. Humidity upper limit display will flash.
2. Touch C.F/DOWN or MAX.MIN/UP touch button to set the desired value.
3. Touch SET/DEW POINT touch button to switch to humidity lower limit setting.
4. Touch the C.F/UP or MAX.MIN/DOWN touch button to set the desired value.
5. Finally touch the SET/DEW POINT touch button to exit settings mode.
6. Touch the ON/OFF touch button to activate humidity alert. ALERT will be displayed on the screen.
7. Touch the ON/OFF touch button again to disable the humidity alert. ALERT will not be displayed.

Changing the measurement displays

• Touch the SET/DEW POINT touch button to switch between current temperature display and dew point temperature display. During dew point temperature dis-play, DEW POINT will be displayed next to the humidity value.
• Touch the C/F touch button to switch between the temper-ature display in °C and °F.
• Touch the MAX.MIN touch button several times to display one after another the maximum, minimum and current temperature and humidity values. MAX, MIN or nothing will be displayed.

Disposal

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on the proper disposal. Do not dispose of electronic devices in the household garbage! According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equip-ment must be collected separately and recycled in an environmentally sound manner. Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return the batteries after use either in our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge. Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

EC declaration of conformity

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address: www.bresser.de/download/7007410000000/ CE/7007410000000_CE.pdf

References

• disponibles.IT
• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | Startseite | Expand Your Horizon mit BRESSER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>