Phoenix Contact USLKG 50-IB Ground modular terminal block User Manual
- June 5, 2024
- PHOENIX CONTACT
Table of Contents
Phoenix Contact USLKG 50-IB Ground modular terminal block User Manual
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user’s documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download)
Ground modular terminal block, with Allen screws, number of connections: 2, number of positions: 1, connection method: Screw connection, Rated cross section: 50 mm², cross section: 16 mm² – 50 mm², mounting: PE foot with mounting screw, M6, mounting type: NS 35/7,5, NS 35/15, NS 32, color: green- yellow
Key Commercial Data
Packing unit
|
10 pc
---|---
GTIN
|
GTIN|
4017918002312
Technical data
General
Number of positions
| 1
---|---
Number of rows|
1
Number of connections
| 2
Nominal cross section|
50 mm²
Color
| green-yellow
Insulating material|
PA
Flammability rating according to UL 94
|
V0
Mounting type
| NS 35/7,5
Rated surge voltage|
8 kV
Degree of pollution
| 3
Overvoltage category|
III
Insulating material group
| I
Maximum power dissipation for nominal condition|
4.73 W
Open side panel
| No
Terminal block mounting|
6 Nm … 8 Nm (PE foot with mounting screw, M6)
Dimensions
| Width | 20 mm |
|---|---|
| Length | 70.5 mm |
| Height NS 35/15 | 83.5 mm |
| Height NS 32 | 81 mm |
Connection data
| Note | Please observe the current carrying capacity of the DIN rails. |
|---|---|
| Connection method | Screw connection |
| Screw thread | M6 |
| Stripping length | 24 mm |
| Tightening torque, min | 6 Nm |
| Tightening torque max | 8 Nm |
| Connection in acc. with standard | IEC 60947-7-2 |
| Conductor cross section solid min. | 16 mm² |
| Conductor cross section solid max. | 50 mm² |
| Conductor cross section AWG min. | 6 |
| Conductor cross section AWG max. | 1/0 |
| Conductor cross section flexible min. | 25 mm² |
| Conductor cross section flexible max. | 50 mm² |
| Min. AWG conductor cross section, flexible | 3 |
| Max. AWG conductor cross section, flexible | 1/0 |
| Conductor cross section flexible, with ferrule without plastic sleeve min. | 25 |
mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.| 50
mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.| 25
mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.| 50
mm²
2 conductors with same cross section, solid min.| 10 mm²
2 conductors with same cross section, solid max.| 16 mm²
2 conductors with same cross section, stranded min.| 10 mm²
2 conductors with same cross section, stranded max.| 16 mm²
Two conductors with the same cross section stranded, with ferrule and without
plastic sleeve, minimum| 10 mm²
Two conductors with the same cross section stranded, with ferrule and without
plastic sleeve, maximum| 16 mm²
Connection in acc. with standard| IEC/EN 60079-7
Conductor cross section solid min.| 16 mm²
Conductor cross section solid max.| 50 mm²
Conductor cross section AWG min.| 6
Conductor cross section AWG max.| 1/0
Conductor cross section flexible min.| 25 mm²
Conductor cross section flexible max.| 50 mm²
Ambient conditions
Operating temperature| -60 °C … 105 °C (max. short-term operating temperature
RTI Elec.)
---|---
Ambient temperature (storage/transport)| -25 °C … 60 °C (for a short time, not
exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)| 30 % … 70 %
Ambient temperature (assembly)| -5 °C … 70 °C
Ambient temperature (actuation)| -5 °C … 70 °C
Standards and Regulations
| Connection in acc. with standard | IEC 60947-7-2 |
|---|---|
| IEC/EN 60079-7 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| 4-Nonylphenol, branched and linear | |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category |
“Manufacturer’s declaration”
Drawings
Circuit diagram
Classifications
eCl@ss
| eCl@ss 10.0.1 | 27141141 |
|---|---|
| eCl@ss 11.0 | 27141141 |
| eCl@ss 4.0 | 27141100 |
| eCl@ss 4.1 | 27141100 |
| eCl@ss 5.0 | 27141100 |
| eCl@ss 5.1 | 27141100 |
| eCl@ss 6.0 | 27141100 |
| eCl@ss 7.0 | 27141141 |
| eCl@ss 9.0 | 27141141 |
ETIM
| ETIM 2.0 | EC000901 |
|---|---|
| ETIM 3.0 | EC000901 |
| ETIM 4.0 | EC000901 |
| ETIM 6.0 | EC000901 |
| ETIM 7.0 | EC000901 |
UNSPSC
| UNSPSC 6.01 | 30211811 |
|---|---|
| UNSPSC 7.0901 | 39121410 |
| UNSPSC 11 | 39121410 |
| UNSPSC 12.01 | 39121410 |
| UNSPSC 13.2 | 39121410 |
| UNSPSC 18.0 | 39121410 |
| UNSPSC 19.0 | 39121410 |
| UNSPSC 20.0 | 39121410 |
| UNSPSC 21.0 | 39121410 |
Approvals
Approvals:
Approvals
CSA / PRS / EAC / cULus Recognized:
Ex Approvals
IECEx / EAC Ex / NEPSI / ATEX / CCC:
Approval details:
| CSA | http://www.csagroup.org/services-industries/product-listing/ 13631 |
|---|---|
| B | |
| Nominal voltage UN | 600 V |
| mm²/AWG/kcmil | 6 |
PRS
http://www.prs.pl/ TE/2156/880590/17
EAC RU CDE.BL08.B.00534
cULus Recognized http://database.ul.com/cgi- bin/XYV/template/LISEXT/1FRAME/index.htm E60425
| B| C
mm²/AWG/kcmil| 6| 6
Accessories
Accessories
DIN rail
DIN rail perforated – NS 32 PERF 2000MM – 1201002
-
DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, G profile, color: silver
-
DIN rail, unperforated – NS 32 UNPERF 2000MM – 1201015
DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, G profile, color: silver -
DIN rail perforated – NS 35/15 PERF 2000MM – 1201730
DIN rail perforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver -
DIN rail, unperforated – NS 35/15 UNPERF 2000MM – 1201714
DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver -
DIN rail perforated – NS 35/15 WH PERF 2000MM – 0806602
DIN rail perforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver -
DIN rail, unperforated – NS 35/15 WH UNPERF 2000MM – 1204135
DIN rail, unperforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver -
DIN rail, unperforated – NS 35/15 AL UNPERF 2000MM – 1201756
DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver -
DIN rail perforated – NS 35/15 ZN PERF 2000MM – 1206599
DIN rail perforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver -
DIN rail, unperforated – NS 35/15 ZN UNPERF 2000MM – 1206586
DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver -
DIN rail, unperforated – NS 35/15 ZN UNPERF 2000MM – 1206586
DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver -
DIN rail, unperforated – NS 35/15 CU UNPERF 2000MM – 1201895
DIN rail, unperforated, similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored -
End cap – NS 35/15 CAP – 1206573
DIN rail end piece, for DIN rail NS 35/15
End block
-
End clamp – E/UK – 1201442
End clamp, Mounting on a DIN rail NS 32 or NS 35, material: PA, color: gray -
End clamp – E/UK 1 – 1201413
End clamps, for supporting the ends of double-level and three level terminal blocks, width: 10 mm, color: gray
Labeled terminal marker
-
Zack marker strip – ZB 10 CUS – 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 -
Zack marker strip – ZB10,LGS:FORTL.ZAHLEN – 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS P1-PLOTTER, printed horizontally: consecutive numbers 1 … 10, 11 … 20, etc. up to 91 … 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 -
Zack marker strip – ZB10,QR:FORTL.ZAHLEN – 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS P1-PLOTTER, Printed vertically: consecutive numbers 1 … 10, 11 … 20, etc. up to 91 … 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 -
Marker for terminal blocks – ZB10,LGS:L1-N,PE – 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 -
Marker for terminal blocks – ZB10,LGS:U-N – 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 -
Marker for terminal blocks – UC-TM 10 CUS – 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 -
Marker for terminal blocks – UCT-TM 10 CUS – 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36
Terminal marking
-
Zack marker strip – ZB 10:UNBEDRUCKT – 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 -
Marker for terminal blocks – UC-TM 10 – 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48 -
Marker for terminal blocks – UCT-TM 10 – 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36
SUPPORT
Phoenix Contact 2022 © – all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
References
- Login
- Download portal | PHOENIX CONTACT
- Phoenix Contact USA
- Ground modular terminal block - USLKG 50-IB - 0443078 | Phoenix Contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>