Wixhc WHB04B Mach3 6 Axis MPG CNC Wireless Controller User Manual
- June 9, 2024
- WiXHC
Table of Contents
Wixhc WHB04B Mach3 6 Axis MPG CNC Wireless Controller User Manual
Driver Installation & Use
- Insert USB receiver to PC USB interface until the driver file installation is over.
- Find “PlugIns” folder in the disk where you install MACH3 software, open the CD in the packaging box, copy driver file XHC-shuttlepro.dll into folder “PlugIns”.
- Macro file installation: Copy all the files in the CD macro folder into mach3/macros/Mach3Mill
- Please open the battery cover and install 2pcs AA batteries, press down power on button, then you can use it directly.
MPG Function Explanation
| Icon | Function |
|---|---|
| Reset button |
| __ Stop button
| Start/Pause button: Press down start button, machine starts to work, press
down pause button, then machine stops working.
_
_| Macro-1/Feed+ button: When
press button alone, macro function -1 works; when press + __, processing speed increases.
_
_| Macro-2/Feed- button: When
press button alone, macro function -2 works; when press + __, processing speed decreases.
_
_| Macro-3/Spindle+ button:
When press button alone, macro function -3 works;when press + __, spindle speed increases.
__| Macro-4/Spindle- button: When press button alone, macro function -4
works;when press + __, spindle speed decreases.
_
_| Macro-5/M-HOME button: When
press button alone, macro function -5 works;when press + __, refer all home.
__| Macro-6/Safe-Z button: When press button alone, macro function -6
works; when press + __, back to safe height of Z axis.
_
_| Macro-7/W-HOME button: When
press button alone, macro function -7 works;when press + __, go to zero work.
_
_| Macro-8/S-ON/OFF button:
When press button alone, macro function -8 works;when press + __, spindle on or off.
__| Macro-9/Probe-Z button: When press button alone, macro function -9
works;when press + _
_, probe Z.
__| Macro-10 button: Press the button, macro function -10 works.
| Function button: When you press this button, then press the other button to
achieve the combination function.
| MPG button: Press the button, hand wheel change into Continuous mode.
| Step button: Press the button, hand wheel change into Step mode.
_
_| Position 1: OFF
Position 2: Choose X Axis
Position 3: Choose Y Axis
Position 4: Choose Z Axis
Position 5: Choose A Axis
Position 6: Choose B Axis
Position 7: Choose C Axis
_
_| Step mode:
0.001: move unit is 0.001
0.01: move unit is 0.01
0.1: move unit is 0.1
1.0: move unit is 1.0
Continuous mode:
2%: 2 percent of max move speed
5%: 5 percent of max move speed
10%: 10 percent of max move speed
30%: 30 percent of max move speed
60%: 60 percent of max move speed
100%: 100 percent of max move speed
LCD Display
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>