BORMANN PRO BBP4400 Battery Grass Scissors User Manual

BBP4400
032786

**Description of main parts

**

1. Shrub shear blade
2. Lock-off button,
3. Handle/Aal3n
4. Switch ON-OFF
5. Cover release button
6. Tool-free drive cover,
7. Grass shear blade 
   

Technical Data

The manufacturer reserves the rht to make minor changes to product design and technical specifications without prior notice 7 unless these changes significantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
Please note that our equipment has not been designed for use in commercial, trade, or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
*** To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer. 
WARNING: Required battery Li-Ion and charger NOT INCLUDED!**

General Safety Instructions

WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in electric shock, fire and /or serious personal injury.
Work area

1. Keep work area clean and well Cluttered and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or Power tools that create sparks that may ignite the dust or fumes.
3. Avoid dangerous environments at all Don’t use the appliance in damp or wet locations.
4. Don’t use it in
5. Keep children and bystanders away while operating a power Distractions can cause you to lose control.

Electrical Safety
(The following applies only to tools with a separate battery pack)
A battery-operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Personal Safety

1. Stay alert, watch what you are doing, and use common sense when operating a power Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
2. Dress Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3. Avoid accidental Be sure that the switch is in the locked or off position before inserting the battery pack. Carrying tools with your finger on the switch invites accidents.
4. Do not Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.
5. Use safety Always wear hearing and eye protection, a Dust mask, non-skid safety shoes, and a hard hat must be used for appropriate conditions.

Power tool use and care

1. Use clamps or other practical ways to secure and support the workpiece to a stable Holding the workpiece by hand or against your body is unstable and may lead to loss of control.
2. Do not force Use the correct tool for your application. The correct tool will do the job better and safer at the rate at which it is designed.
3. Do not use the tool if the switch does not turn it on or A tool that cannot be controlled with the switch is dangerous and must be repaired.
4. Store idle tools out of reach of children and other untrained Tools are dangerous in the hands of untrained users.
5. Maintain tools with Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.
6. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool If damaged, have the tool serviced before using . Many accidents are caused by poorly maintained tools.
7. Use only accessories that are supplied with your Other accessories that may not be suitable for this tool and may create a risk of injury when used.

Recommended and Proper Use

This handheld power tool is a cordless shrub & grass shear. It is intended for domestic and light commercial use only. Any other application is considered misuse. This power product is supplied without batteries or chargers. This power tool should only be operated combined with the recommended by the manufacturer genuine Bormann battery and charger.

Device-specific safety instructions for shrub & grass shear

1. Keep all parts of your body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed Blades coast after turn off. A moment of inattention while operating the shrub & grass shear may result in serious personal injury.
2. Keep the shrub & grass shear by the handle with the cutter blade When transporting or storing the shrub & grass shear always fit the cutting device cover. In any case, proper handling of the shrub & grass shear will reduce any possible personal injury from the cutter blades.
3. Hold the power tool by the insulated gripping surfaces only, because the cutter blade may contact hidden wiring. Cutter blades contacting a live wire may make expose in return parts of the power tool and make them electrically live as well which eventually could give the operator an electric
4. Keeping hands away from Contact with the blade will result in serious personal injury.
5. Only use with handle properly assembled to the shrub & grass shear. The use of a shrub & grass shear without the proper handle, which is provided, may result in serious personal
6. Before starting to work with the shrub & grass shear check the working area for wire fences, rocks or any other material that could damage either the blade, the power tool or cause an injury to the operator of the tool or other people in close proximity to the working area at the worst

Charging batteries

Οnly the original charger must be used to charge the batteries supplied by the manufacturer. Only batteries and chargers designed by Bormann can be used in conjunction with this product in general. The use of any other types of batteries/chargers in combination with this product is considered abuse and will void the warranty. Once connected to the power supply, the battery can be recharged without the need for monitoring. The complex construction of the circuit monitors the condition of the battery by adjusting the recharge current to match the requirements. When the recharge cycle is complete and in order to maintain full capacity, a low-voltage output current will continue to be powered as needed.

WARNING : Check the status of the charger and battery before each charge. If there is any indication of the fault then do not continue, seek advice from an authorized vendor.

Battery pack efficiency and charging advice

Recharge the battery packs before they become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge the battery packs. If you continue to use the tool and exhaust the electric current, the battery pack may become damaged. Avoid recharging at high temperatures. A rechargeable battery pack will be hot immediately after use. If such a battery pack is recharged immediately after use, its internal chemical substance will deteriorate, and the battery life will be shortened. Leave the battery pack and recharge it after it has cooled for a while. The battery pack should only be used and/or charged when the battery pack temperature is, ideally, between 50C and 300C. The battery pack needs to be warmed up or cooled down in order to prevent damage to the battery’s internal components should this temperature not apply at the time of recharging.

Note: Failure to warm up or cool down a battery pack could result in serious damage to either battery, charger, or even in injury to the user.

Assembly Instructions

| ACTION| FIGURE
---|---|---

ASSEMBLY (Fitting/Changing the Blade)

1| Removing the blade

Warning: wear gloves!

| Fig. 1 / II
2| Fitting the blade| Fig. III / IV

Before Operation

3| Checking the battery

cartridge condition

| Fig. V
4| Charging the

battery cartridge

| Fig. VI
5| Installing the

battery cartridge

| Fig. VII
6| Removing the

battery cartridge

| Fig. VIII

Note: All necessary actions before the operation are shown on the left in a tabular manner. Each action is correlated with one or two figures as presented on page 3 of this instructions manual.

Operation Instructions

**** Before using the tool, read the instructions manual carefully. The product is intended for light trimming of shrubs, grass, and lawn edges in domestic use. Bear in mind that there is a constant danger of being injured by the cutting blade, therefore in all cases, never start working with the shrub and grass shear without wearing protective glasses and gloves. Check the working area for wires, rocks, and broken glass that can possibly harm the blade, yourself, or other people passing by the working area. Danger! It is of utmost importance to always keep the tool away from hard objects.

A. Starting and Stopping (See Fig. IX )
Cutting grass with the grass shear ( Fig. X ):

1. Remove the protective cover of the blade (if one is provided).
2. Turning the appliance ON A. Push the lock-off button (2) B. Push the button ON-OFF (4) The appliance is now turned on and ready for cutting work.
3. Move the blade in a parallel manner with respect to the ground.
4. In order to make a closer cut slightly tilt the tool.

B. Cutting shrub with the shrub shear ( Fig. XI ):

1. Remove the protective cover of the blade (if one is provided).
2. Turning the appliance ON A. Push the lock-off button (2) B. Push the button ON-OFF (4) The appliance is now turned on and ready for cutting work.
3. Always move the blade in a parallel manner with respect to the shrub.
4. In order to make a closer cut slightly tilt the tool.

Maintenance and Troubleshooting

Maintenance
Regular inspection and cleaning reduce the necessity for maintenance operations and will keep your tool in good working condition. Avoid blocking the air inlets and vacuum the ventilation slots regularly.
WARNING: Always remove the rechargeable battery from the device before all maintenance activities take place.

• Replace all damaged or worn parts to ensure that the shrub and grass shear is always ready for safe operation.
• Remove all debris and clean ventilation slots and openings with a brush, and clean the exterior of the machine thoroughly with a soft brush and cloth.
• Do not use water, solvents, or cleaning agents containing chemicals that could damage the plastic parts. Wipe the housing clean with a cloth.
• Always store the shrub and grass shear in a dry, frost-free location beyond the reach of children. Never place other objects on top of the machine.
• Always clean the cutting blades of the shrub and grass shear after the operation and periodically lubricate the cutting blade.
• Visually check the condition of the cutting edges of the cutting blade.
• Ensure that the blade is covered with the blade guard (in case a blade guard is indeed provided) when not in use.
• Store and charge your rechargeable batteries at a cool location. Temperatures above or below normal room temperature shorten the lifespan of the rechargeable batteries.
• Do not store rechargeable batteries when discharged. Wait until the rechargeable battery has cooled down and charged it completely.
• Rechargeable batteries gradually lose their charge. The higher the temperature, the quicker they lose their charge. For longer storage periods, recharge the rechargeable battery every one or two months. This will extend the lifespan of the rechargeable battery.

Troubleshooting

Problem

| Possible Cause|

Remedy

The unit does not start| The battery was not installed properly
The battery is not charged| Check battery installation Check battery charging requirements
The battery will not charge| The battery is not inserted into the charger| Connect the battery to the charger
The charger is not connected to the socket| Connect the charger to a working outlet. Check current at receptacle by plugging in a lamp or other appliance
The air temperature is too high or too low| Attempt to charge the battery in a room where the surrounding air temperature is above 4,5 C or below + 40,5 C (maximum range)

Handling and Storage
Special care must be taken when handling this product. Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This product is not a toy and must be respected. Environmental conditions can have a detrimental effect on this product if neglected. Exposure to damp air can gradually corrode components. If the product is unprotected from dust and debris, components will become clogged. If not cleaned and maintained correctly or regularly the machine will not perform optimally.

Disposal

At the end of the working life of the machine or when it can no longer be repaired, ensure that it is disposed of according to all relevant national regulations. — Contact your local authority for details of collection schemes in your area. In all circumstances:

• Do not dispose of power tools along with the domestic waste.
• Do not incinerate the power tool.
• Do not dispose of as unsorted municipal waste.

Warning!

• Do not put the battery pack in fire or mutilate it; cells may burst or release toxic materials.
• Do not short circuit cells, may cause burns.
• The battery pack must be removed from the appliance before it is scrapped.
• The battery pack is to be disposed of safely.
• Do not dispose of batteries or cells in a charged condition.

Expired batteries must be recycled/disposed of in accordance with the appropriate regulations or local legislation. They should be returned to your local warranty agent/stockist.

|
---|---
DISPOSE OF PACKAGING RESPONSIBLY| DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE

WWW.BORMANNTOOLS.COM

Documents / Resources

| BORMANN PRO BBP4400 Battery Grass Scissors [pdf] User Manual
BBP4400, Battery Grass Scissors, Grass Scissors, BBP4400, Scissors
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>