BORMANN PRO BDM7000 Laser distance meter 100m User Manual
- June 3, 2024
- BORMANN PRO
Table of Contents
BORMANN PRO BDM7000 Laser distance meter 100m User Manual
Product Overview
Product Overview Thank you for using Bormann hand-held laser distance meter, please read the instruction carefully before operation. This product is a hand-held laser distance meter with super high ingress protection.
Main features: IP65 waterproof, drop-resistance and super long lifespan. 2- inch HD white- on-black display, which is easier for users to read at any time of the day or night. Works with rechargeable NI-MH batteries, which makes it more environment friendly and has longer life. Integrated electronic tilt sensor, making it easier to achieve horizontal alignment with the real-time measuring angle. Comprehensive measuring functions of Area, Volume, Pythagoras, Auto Level, Auto Height.
Appearance
-
Measure Button
Activate the measuring mode, short press to measure, long press to Continuous measurement. -
Menu Button
Press to change measuring mode: Area/ Volume/ Pythagoras/Auto Level/Auto Height. -
Measuring Reference/Unit Button The Rear is the default Reference. Short press to change the Reference (Front/Tripod/ Rear) , Long press to change the measuring units (m/ ft/in/ft+in).
-
Laser Emitter Icon
-
Display Screen Mode selection display
-
Memory Button Press to recall memory values.
-
Add(+) / Subtract(-) Button Under the mode of Distance, Area and Volume measurement, short press to add values, long press to subtract.
-
Mute Button Press to De-/activate the Beep.
-
ON/OFF/Clear/Return Button Long press to switch ON/OFF, short press to clear the previous operations or return to main menu.
-
Battery Compartment
-
Tripod Screw Hole
Display Screen
- Battery status
- Distance /Continuous measurement
- Laser on
- Reference (Front)
- Reference (Tripod)
- Reference (Rear)
- Measuring mode indication
- Angle indicator
- Historical values
- Value 1
- Value 2 / Min value
Safety Instructions
carefully before the product is used for the first time.
Warning!
A. The device is categorized into Class 2 laser product. DO NOT stare at laser
directly or shoot at others or it will cause damage to eyes.
B. The product Is In accordance with strict standards and regulations through
the development and manufacturing, but still can’t entirely exclude the
possibility of Interference to other devices, may cause discomfort to human
and animals.
- Please DO NOT use this product under explosive or corrosive environment.
- Please DO NOT use this product near medical devices.
Please DO NOT use this product on the plane.
Disposal
Everyone is responsible for environmental protection.
It’s prohibited to dispose used batteries together with household waste,
please collect used batteries to designated waste station.
This product must not be recycled with household waste. Dispose of the product
appropriately in accordance with the national regulations in your country.
Scope of Responsibility The manufacturer will not be responsible for the
damages caused by improper use below: Using the product without Instruction:
use of accessories from other manufacturers without approval from Bormann.
Carrying out modifications or conversions of the product.
Battery Installation and Instructions
The product uses rechargeable NI-MH batteries. Please use provided USB cable
while charging. The computer can also be used to charge, but this takes more
time
Warning: When use dry batteries, please DO NOT use USB to charge. DO NOT mix
rechargeable batteries with dry batteries at the same time to avoid accidents.
Any damage caused by Improper use of charging dry battery Is not covered by
the warranty, the manufacturer not be responsible for It.
- Not available on all models.
While charging, the device may heat up, this Is normal, and will not affect
the product performance and lifetime.
Please unplug the charger and take off the batteries when not In use.
Technical Data
-
The Maximum range shall be different according to different models. The actual range refers to the package.
-
Measuring Accuracy (”D” stands for measured distance) If measuring under favourable conditions, such as smooth surface, proper temperature and indoor lighting, the device is able to work within certain range as declared.
Maximum deviation occurs under unfavourable conditions such as bright sunlight or when measuring to poorly reflecting or very rough surfaces. -
Tilt Measurement Accuracy
0.1° is caused by temperature, D is +/- 0~45°, e.g.: at normal temperature the accuracy is +/-0.3° at angle of 0° , at abnormal temperature the accuracy is +/-0.85°
at angle of 45°.
Tips: In case of bright sunlight and bad reflection of the object, please use the target plate or reflector.
1. Battery status 2. Distance /Continuous measurement 3. Laser on 4. Reference (Front} 5. Reference (Tripod) 6. Reference (Rear) 7. Measuring mode indication 8. Angle indicator 9. Historical values 10. Value 1 11. Value 2 / Min value
Operating Instructions
Troubleshooting
All errors or failures will be shown as codes. The following table explains the meaning of codes and solutions.
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.