BORMANN PRO BWR7500 Roller Tool Cabinet User Manual

: June 3, 2024
: BORMANN PRO

Table of Contents

BORMANN PRO BWR7500 Roller Tool Cabinet
PARTS DESCRIPTION
Safety Warnings
Usage Warnings
Usage Instructions
Operating lnstructions
Drawer Identification Card Replacement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BORMANN PRO BWR7500 Roller Tool Cabinet

PARTS DESCRIPTION

Technical Data

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

Safety Warnings

Always use the proper safety Equipment when using hand tools or power tools.
Failure to do so may result in personal injuries or product damage.
Use the proper man power to assemble and transport the Trolley.
Failure to do sO may resut in personal injuries or product damage.
DO NOT stand on the Trolley a fall could result in serious injury.
DO NOT transport this Trolley in a truck, utility or any other vehicle without making sure it is securely attached. Secure Irolley properiy when moving with a forkliTt. Failure to do so may result in personal injuries or product damage.
DO NOT tow this Trolley with any motor vehicle-= the Trolley could tip over, resuting in personal injuries or product damage.
DO NOT alter this product in any way.
Doing so may result in personal injuries or product damage.

Usage Warnings

Never open more than one loaded drawer at a time, othewise the unit may tip over.
Do not overload the drawers. Apply the brake when stationary.
Close all drawers before moving and always push cabinet, never pull.
Push Trolleys at speeds so you can turn Trolley at wil.
Do not move Trolley with items on top.
Too much weight in front of drawers can cause unít to tip forward.

Usage Instructions

DO NOT leave the Trolley on a slanted ground or push down stairs.
DO NOT use a motor vehicles to pull the Trolley.
DO NOT use the Trolley in extreme humidity or in high acidic environments.
DO NOT hit the working surface with heavy tools.
DO NOT exceed the weight limit of 250Kg Small Drawers load capacity up to 25Kg Medium Drawers load capacity up to 35Kg Large Drawers load capacity up to 35Kg

Operating lnstructions

To pull or push the Trolley, securely hold the Trolley and release the castor brake.
Insert the key into the key hole and turn key 180° to lock or unlock the drawers.
Each drawer has its own locking system on the right side of the Trolley. To open the drawers, push locking lever beneath handle to the left.
To remove the identification strip, use a screwdriver and loosen the screws (note: do not undo screws completely), remove the stop block and remove the strip and mark strip to identify the tools in the drawer (see page 6 for more information).
The Trolley is equipped with a castor and brake. Plush down on the brake to activate and pull up to deactivate.

Drawer Identification Card Replacement

To make the cabinet tilted or dawn to the ground, as show in pictures use hex key to unscrew the fastening casters bolt counterclackwise. Remove the broken casters, to install new casters as shows in picture. As show in picture (, use hex key to tighten the screws clockwise ,and fix the casters.