DLHC1455W Compact 24 Wide Heat Pump Dryer

Product Information

Specifications

• Model: DLHC1455W
• Capacity: 4.2 cu. ft.
• Color: White (Ventless)
• Electrical Requirements: 240V, 30 Amp
• Drum Material: NeveRustTM Stainless Steel
• Dimensions: 24″ x 33 1/2″ x 26 3/8″
• Weight: 127.9 lbs.

Product Usage Instructions

Controls and Display

The dryer features electronic controls with LED display, touch
buttons, and Dial-A-CycleTM for easy operation.

Dryer Cycles

The dryer offers 14 cycles including Sensor Dry Cycles like
Normal, Heavy Duty, Towels, and more, as well as Manual Dry Cycles
such as Rack Dry and Air Dry.

Dryer Options

Utilize the 12 options available including More Time, Less Time,
Wrinkle Care, and Control Lock to customize your drying
experience.

Fabric Care

While the dryer does not feature Steam Technology, it does offer
Sensor Dry for precise drying results.

Convenience Features

Enjoy features like Drum Light, Control Lock, and End of Cycle
Signal for added convenience.

Smart Features

This dryer is Wi-Fi enabled, compatible with Google Assistant
and Amazon Alexa, and offers SmartDiagnosisTM for
troubleshooting.

Materials and Finishes

The drum is made of NeveRustTM Stainless Steel, and the door
features a Glass/Chrome finish with a Clear Round Cover.

FAQ

Q: What are the electrical requirements for the dryer?

A: The dryer requires a 240V, 30 Amp power outlet within 24
inches of either side.

Q: Is the dryer ventless?

A: Yes, the dryer features a ventless design for easy
installation.

Q: Are there Smart features available on this dryer?

A: Yes, the dryer is Wi-Fi enabled, supports voice control, and
offers remote monitoring and notifications.

DLHC1455W
A
4.2 cu. ft. Compact 24″ Wide Heat Pump Dryer (Ventless)
· 4.2 cu. ft. Compact Capacity · Dual Inverter HeatPumpTM Technology · Ventless Design · Auto Cleaning Condenser · 14 Cycles / 12 Options · Sensor Dry System · Wrinkle Care Option · Delicate Cycle · NeveRustTM Stainless Steel Drum · LG ThinQ® Technology (Wi-Fi)

COLOR AVAILABILITY

DLHC1455W (Electric) ­ White

CAPACITY & MATCHING WASHER

Capacity (cu. ft.)

4.2

Matching Washer

WM1455HW

APPEARANCE

Electronic Controls with LED Yes Display

Touch Buttons

Yes

Dial-A-CycleTM

Yes

DRYER CYCLES

Number of Cycles

14

Sensor Dry Cycles

Normal, Heavy Duty, Bulky / Large, Small Load, Towels, Sportswear, Antibacterial, Delicates, Wool, Perm Press

Manual Dry Cycles

Rack Dry, Heated Dry, Air Dry, Downloaded

DRYER OPTIONS

Number of Options

12

Options

More Time, Less Time, Wrinkle Care, Control Lock, Wi-Fi, PGM Save, Custom PGM, Remote Start, Condenser Care, Drum Care, Drum Light, Signal

Drying Levels

Very Dry, Normal Dry, Damp Dry. Modes: Energy Saver, Normal

Manual Dry Times

More Time / Less Time

FABRIC CARE

Steam Technology

No

Sensor Dry

Yes

CONVENIENCE

Drum Light

Yes

Control Lock

Yes

FlowSenseTM Duct Clogging

No

Indicator

End of Cycle Signal

Yes

Remaining Time Display / Status Yes Indicator(s)

Reversible Door

Yes

Venting Option

Ventless Design

3 Minute Installation Check

No

Leveling Legs

4 Adjustable Legs

ADA Compliant

No

SMART FEATURES

Wi-Fi Enabled

Yes

ThinQ® Technology

Yes

ThinQ Care

Yes

Voice Control

Google Assistant, Amazon Alexa

SmartDiagnosisTM

Yes

Remote Start (On / Off)

Yes

Remote Monitoring &

Yes

Notifications

MATERIALS AND FINISHES

Drum Material

NeveRustTM Stainless Steel

Door / Rim

Glass / Chrome

Door Cover

Clear Round Cover

TECHNICAL SPECS

Electrical Requirements

240V, 30 Amp

Power Outlet Location

Within 24″ of Either Side

Plug Type

4-Wire (Cord Required)

ENERGY STAR® Certified

Yes

Combined Energy Factor (CEF) 6.4

6/24 1 of 4

DLHC1455W

A

INCLUDED ACCESSORIES Stacking Kit, Drain Hose DIMENSIONS Product (W x H x D) Depth with Door Open Cutout Dimensions (W x H x D) Carton Dimensions (W x H x D) Approx. Weight (Product / Carton)

24″ x 33 1/2″ x 26 3/8″ 45 1/4″ 26″ x 33 1/2″ x 31 3/8″ 26″ x 34″ x 27 1/2″ 127.9 lbs. / 134.5 lbs.

LIMITED WARRANTY Parts and Labor Dryer Drum

1 Year 3 Years (Parts Only)

DIMENSIONS / CLEARANCES
SPACING FOR RECESSED AREA OR CLOSET INSTALLATION These clearances are recommended for this dryer. · Additional clearance should be considered for ease of installation and servicing. · Additional clearances should be considered on all sides of the dryer to reduce noise transfer.

DIMENSION / CLEARANCE

A Upper Ventilation Opening

B Lower Ventilation Opening

C Distance to Ventilation Opening

D Overhead Cabinet Depth

E Distance to the Overhead Cabinet/ Shelf

F Front Clearance

G Depth

H Back Clearance

I Side Clearance

J K

Width
Height of Cabinet Opening

48 sq. in. (310 cm2) 24 sq. in. (155 cm2) 3″ (76 mm) 14″ (356 mm) 18″ (457 mm)
1″ (25 mm) 26 3/8″ (670 mm) 5″ (127 mm) 1″ (25 mm) 24″ (600 mm) 33 1/2″ (850 mm)

6/24 2 of 4

DLHC1455W
A
DIMENSIONS / CLEARANCES
CLOSET VENTILATION REQUIREMENTS Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet. One upper vent opening with a minimum opening of 48 sq. in. (310 cm2) must be installed no lower than 6 feet above the floor. One lower vent opening with a minimum opening of 24 sq. in. (155 cm2) must be installed no more than one foot above the floor. Install vent grills in the door or cut down the door at the top and bottom to form openings. Louvered doors with equivalent ventilation openings are also acceptable. INSTALLATION SPACING FOR RECESSED AREA OR CLOSET, WITH STACKED WASHER AND DRYER These clearances are recommended for this dryer. · There should be at least a little space around the dryer (or any other appliance) to eliminate
the transfer of vibration from one appliance to another. If there is enough vibration, it could cause appliances to make noise or come into contact, causing paint damage and further increasing noise. · No other fuel-burning appliance can be installed in the same closet as a dryer.

DIMENSION / CLEARANCE A Upper Ventilation Opening

48 sq. in. (310 cm2)

B Lower Ventilation Opening

24 sq. in. (155 cm2)

C Distance to Ventilation Opening

3″ (76 mm)

D Front Clearance

1″ (25 mm)

E Back Clearance F Top Clearance to the Ceiling

5 1/2″ (140 mm) 6″ (152 mm)

G Height to the Top of Stacked Appliances

67″ (1700 mm)

H Side Clearance

1″ (25 mm)

I Width

24″ (600 mm)

Differs depending on the washer dimensions.

6/24 3 of 4

A
DIMENSIONS / CLEARANCES INSTALLATION SPACING FOR CABINET AND CLEARANCES WITH OPTIONAL PEDESTAL BASE For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.

DIMENSION / CLEARANCE

A Depth of

7″ (178 mm)

Ventilation Opening

B Back Clearance

5″ (127 mm)

C Depth

26 3/8″ (670 mm)

D Front Clearance

1″ (25 mm)

E Side Clearance

1″ (25 mm)

F Width

24″ (600 mm)

G Clearance to Top of 9″ (229 mm) Cabinet

CONNECTING ELECTRIC DRYERS Electrical Requirements for Electric Models Only · This dryer must be connected to a grounded metal, permanent
wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the dryer. · The dryer has its own terminal block that must be connected to a separate 240 VAC, 60-Hertz, single-phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). ELECTRICAL SERVICE FOR THE DRYER SHOULD BE OF THE MAXIMUM RATE VOLTAGE LISTED ON THE NAMEPLATE.. DO NOT CONNECT THE DRYER TO 110-, 115-, OR 120-VOLT CIRCUIT. · If the branch circuit to dryer is 15 ft. (4.5 m) or less in length, use UL (Underwriters Laboratories) listed No.-10 AWG wire (copper wire only), or as required by local codes. If over 15 ft. (4.5 m), use UL-listed No.-8 AWG wire (copper wire only), or as required by local codes. Allow sufficient slack in wiring so the dryer can be moved from its normal location when necessary. · The power cord (pigtail) connection between the wall receptacle and the dryer terminal block IS NOT supplied with the dryer. Type of pigtail and gauge of wire must conform to local codes

FOUR-WIRE POWER CORD · A 4-wire connection is required for all mobile
and manufactured home installations, as well as all new construction after January 1, 1996. · A UL-listed strain relief is required. · Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends.
FOUR-WIRE DIRECT WIRE · A 4-wire connection is required for all mobile
and manufactured home installations, as well as all new construction after January 1, 1996. · A UL-listed strain relief is required. · Use UL-listed 4-wire #10 AWG minimum copper conductor cable. Allow at least 5 ft. (1.5 m) of wire to allow for removal and reinstallation of the dryer.

© 2024 LG Electronics USA, Inc. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice.

6/24

4 of 4

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>