Trust ZLED-2209 Smart Home Zigbee LED Lights User Manual
- June 4, 2024
- Trust
Table of Contents
Trust ZLED-2209 Smart Home Zigbee LED Lights
INSTALLATION INSTRUCTION
COMPATIBILITY
The Smart LED lamp works with our Z1 ZigBee Bridge, ICS-2000 control station, remote control and other ZigBee certified devices such as Philips Hue (compatibility on trust.com/zigbee). For color control a bridge/control station is required.
INSTALLATION
Install the lamp in a lamp socket. (Do not install the lamp behind an existing dimmer!). Turn ON the lamp by switching on the traditional light switch.
DOWNLOAD APP
When using the lamp with a Z1 ZigBee bridge or ICS-2000, get the App by scanning the QR code or go to trust.com/zigbee. When using the lamp with the remote control follow the steps in the manual of the remote control.
FOLLOW APP INSTRUCTIONS
Open the App and follow the instructions to connect the lamp. The lamp will blink 2x to confirm when the connection succeeded.
Note : ZigBee RGB bulbs/spots will turn green for 10 seconds to confirm the connection.
PUT THE LAMP IN CONNECT MODE FOR ZIGBEE BRIDGE (LIKE Z1/ ICS-2000)
You can put the lamp in connect mode (reset) by turning the lamp ON and OFF 5x
with the traditional light switch or screw/unscrew the lamp 5x from the lamp
socket. The lamp flashes 4x to confirm the connect mode (reset). The connect
mode lasts 20 seconds. The wireless range increases when you add more ZigBee
products (meshing). To learn more about meshing go to
www.trust.com/zigbee
References
- Trust.com - Home
- Trust.com - Contact & Support - Installation of ZigBee products
- Trust.com - Home
- Trust.com - Contact & Support - Installation of ZigBee products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>