Nedis HPBT6050BK Fully Wireless Earphones User Manual

June 5, 2024
nedis

HPBT6050BK Fully Wireless Earphones

Nedis HPBT6050BK Fully Wireless Earphones

User Manual

Preface

 Thank you for purchasing the Nedis HPBT6050BK.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

This user manual is addressed to the end user. Read this information carefully before installing or using the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis HPBT6050BK is a pair of fully wireless earphones.

The product can be paired with any Bluetooth enabled audio/video device.

Earphones can be charged up to 3 times in the charging case.

The charging case also functions as a portable speaker.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Fully Wireless Earphones

---|---

Article number

|

HPBT6050BK

Power input

|

5 VDC ; 1.0 A

Bluetooth® version

|

5.0

Bluetooth® frequency range

|

2402 – 2480 MHz

Frequency response

|

20 Hz – 20 KHz

Max. radio transmit power

|

3 dBm

Impedance

|

16 Ω

Sensitivity

|

90 ± 3 dB

Driver size

|

6 mm

Voice control

|

Siri, Google Assistant

Battery type

|

Lithium-Polymer (earphones)

Lithium-Polymer (charging case)

Charging time

|

Up to 2 hours

Case recharges

|

Up to 4 times

Battery capacity earphones

|

2 x 50 mAh

Battery capacity charging case

|

500 mAh

Play time

|

Up to 4 hours

Waterproof

|

Yes

Touch control

|

Yes

Main parts (image A)

A

1. Status indicator LED


2. Left earphone touch control / Microphone

3. Lid

4. Right earphone touch control / Microphone

5. Earphone charging indicator LED

6. USB-C port

7. USB-C cable

8. Left earphone slot

9. Right earphone slot

10. Case charging indicator LED

11. Speaker

12. 3 Pairs of ear tips (S/M/L)

Safety instructions

WARNING

  • Only use the product as described in this manual.
  • Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
  • Do not expose the product to direct sunlight, naked flames or heat.
  • Do not expose the product to water or moisture.
  • Do not drop the product and avoid bumping.
  • Do not open the product.
  • Keep the product out of reach from children.
  • This product is not a toy. Never allow children or pets to play with this product.
  • Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas .
  • Listening on high volume for a long time will damage your hearing.
  • Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
  • Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
  • This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
  • Do not short circuit.
  • Do not repair the product. If damaged, it must be properly disposed of.
  • Only use the product as described in this manual.

Safety symbols on the product

Icon

|

Description

---|---

|

Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.

|

Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.

Installation

  • Check the contents of the package
  • Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website:  www.nedis.com.

Pairing the earphones to a Bluetooth audio source

1. Rotate the lid  A 3 to open the charging case. The earphones switch on automatically.

  • Tap and hold both earphone touch controls  A 2, A 3 for 1.5 seconds to manually switch on the earphones.

2. The status indicator LED  A 1 starts blinking to indicate pairing mode is active.

3. Enable Bluetooth on the device you want to pair the earphones with.

4. Select “HPBT6050BK” from the list of available Bluetooth devices on your device.

Charging the product (image B)

B

1. Plug he USB-C cable  A 7 into the USB-C port  A 6 of the charging case.

2. Plug the other end of  A 7 into a computer or power adapter.

3. Plug the power adapter into a power outlet.

4. The Earphone charging indicator LED  A 5 blinks.

5. A 5 lights up blue when the earphones are fully charged.

  • The earphones and the charging case can charge simultaneously.

6. The charging indicator LEDs  A 9 indicate the charging progress of the battery.

7. Place the earphones into the respective slots  A 8, A 9 and close the lid  A 8 to charge the earphones.

Use

Switching on the product

Tap and hold  A 2 and  A 4 for 1.5 seconds to switch the product on or off.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

  • To answer an incoming call, tap  A 2 or  A 4.
  • To reject an incoming call, tap and hold A 2 or  A 4 for 1.5 seconds.
  • To end a call, tap A 2 or  A 4.
  • To switch the call between phone and earphones, double tap A 4.
Controlling the music
  • Tap  A 2 or  A 4 to play or pause the music.
  • Double tap A 4 to increase the volume.
  • Double tap A 2 to decrease the volume.
  • Tap and hold A 4 for 1.5 seconds to skip to the next track.
  • Tap and hold A 2 for 1.5 seconds to skip to the previous track.
Add Siri/Google Assistant function
  • Triple tap  A 2 or  A 4 for 1.5 seconds to activate Siri/Google Assistant.
  • Tap  A 2 or  A 4 to end Siri/Google Assistant.
Speaker

If the earphones are switched off, or the batteries are low, you can use the speaker to play music.

The speaker stops playing when you close the lid  A 8.

Restore to default settings

1. Make sure that the earphones are switched off.

2. Tap and hold  A 2 and  A 4 for 8 seconds.

  • This function is suggested to be used when the earphones can not connect to each other under the conditions of common use.

Maintenance

  •  Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
  • Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
  • Do not clean the inside of the product.
  • Do not attempt to repair the product. If the product does not operate correctly, replace it with a new product.

Warranty

 Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

Disclaimer

 Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

 We, Nedis B.V. declare as manufacturer that the product HPBT3050BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via  webshop.nedis.com/hpbt3050bk#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals