V-TAC VT-7968 LED Table Lamp Instruction Manual
- June 1, 2024
- V TAC
Table of Contents
V-TAC VT-7968 LED Table Lamp
Specifications
- Model: VT-7968
- SKU: 23357, 23358
- Watts: 1.5 W
- Lumens: 40 Lm
- Beam Angle: 100%
- Material: Iron+Cloth Cover
- Adapter Output: DC 5V, 2A
- Battery: 1800mAh
- Charging Time: 4-5 Hours
- Working Time: 8-9 Hours
- Touch Dimming Level: 10-100%
- Cable Length: 0.8M
- IP Rating: IP20
- Dimension:
Product Usage Instructions
Operation Guide
- Tap on the button at the top of the lamp to switch on/off the lamp.
- For the color temperature, press once for warm light, press twice for white light, and press three times for neutral light.
- For the Dimming function – Make sure the light is ON, tap on the touch button, and hold for the light to increase the brightness.
- When turning on the lamp next time, the light brightness level will be the same as the last setting.
Maintenance
- Please clean the lamp once every two months to keep it smooth and bright.
- Use a cleaning cloth and water to clean the dust.
- For filthy marks, please use a cleaning cloth and soapsuds.
- Do not clean the lamp with high-volatility and high-corrosive liquid which can lead to discoloring or damaging the lamp.
FAQ
Q: Can I replace the light source in this lamp?
A: No, the light source of this luminaire is not replaceable; when it reaches its end of life, the whole luminaire should be replaced.
Q: How can I know the charging status of the lamp?
A: The red color indicator shows that charging is in progress, and the green color indicator indicates that the battery is fully charged.
Q: What should I do if I have any queries or issues with the product?
A: In case of any query or issue with the product, please reach out to [email protected] or contact our distributor or nearest dealers for assistance.
TECHNICAL DATA
| MODEL | VT-7968 |
|---|---|
| SKU | 23357, 23358 |
| WATTS | 1.5 W |
| LUMENS | 40 Lm |
| BEAM ANGLE | 180° |
| MATERIAL | Iron+Cloth Cover |
| ADAPTER OUTPUT | DC 5V, 2A |
| BATTERY | 1800mAh |
| CHARGING TIME | 4-5 Hours |
| WORKING TIME | 8-9 Hours |
| TOUCH DIMMING LEVEL | 10-100% |
| CABLE LENGTH | 0.8M |
| IP RATING | IP20 |
| DIMENSION | Ø140×280 mm |
INTRODUCTION & WARRANTY
- Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference.
- If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase.
- The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.
- The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty.
- This product is warranted for manufacturing defects only.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
WARNING
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- For Indoor Use Only
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, Risk of electric shock
OPERATION CAUTIONS
- Please do not put the lamp on high-temperature surfaces, and do not use it in a flammable or humid environment, to avoid breakdown, short circuit, etc.
- The adapter must be under the specialized range.
- Please ensure to place the lamp on a steady base only.
OPERATION GUIDE
- Tap on the button at the top of the lamp to switch on/off the lamp
- For the color temperature, press once for warm light, press twice for white light, and press three times for neutral light.
- For the Dimming function – Make sure the light is ON, tap on the touch button, and hold for the light to increase the brightness. When turning on the lamp next time, the light brightness level wil be the same as the last setting.
COLOR LED INDICATOR
- RED COLOR INDICATOR: Charging is in progress.
- GREEN COLOR INDICATOR: The battery is full charge
MAINTENANCE
- Please clean the lamp once in every two months to keep it smooth and bright.
- Use a cleaning cloth and water to clean the dust.
- For filthy marks, please use a cleaning cloth and soapsuds.
- Please do not clean the lamp with high-volatility and high-corrosive liquid which can lead to discoloring or damaging the lamp.
- In case of any query/issue with the product, please reach out to us at: [email protected]
- For More product ranges, inquiry please contact our distributor or nearest dealers.
- V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Loading......