lionelo Whizz Neo Stunt Scooter User Manual
- June 5, 2024
- lionelo
Table of Contents
lionelo Whizz Neo Stunt Scooter
Dear customer!
- Should you have any remarks or questions concerning the product, please do not hesitate to contact us: [email protected]
- Before you use the product, please read this operating manual carefully.
- The product has been tested and complies with the standard EN 14619:2019
Producer
- BrandLine Group Sp. z o. o.
- ul. A. Kręglewskiego 1, 61-248 Poznań, Poland
WARNINGS
- Always check limitations of use related to road safety procedures.
- Do not use the scooter on wet, slippery and dirty surfaces as it raises fall and injury risks. You must not ride on stairs and steps, please use the scooter only on flat and hard surfaces. Ride away from road traffic.
- Use protective clothing, i.e. knee pads, elbow pads, helmet, and gloves. If you take no protective measures but fall, you may get seriously injured or even die!
- Before you use the product, make sure the steering unit has been correctly adjusted. Make sure all connecting units are well-secured and not damaged or cracked, while screws properly tight. Check wheels and their hardness.
- Always wear footwear while using the product.
- Do not ride when it is dark.
- The brake warms up in case of constant use, do not touch it after braking.
- Regularly check the product for potential defects to provide your child with security while using the scooter. When using the product, some of its components may naturally wear out. Self-locking nuts or another fixing may become ineffective after about six months of use, please inspect the scooter on a regular basis. Before every use, inspect the technical condition of the product.
- It is forbidden to modify the product in another way than described in the manual.
- Please get familiar with the manual supplied by the manufacturer.
- The maximum permissible load is 100 kg (A-class). The product is intended for children above the age of 8.
- The product is not intended for extreme sports.
- Do not hold sharp items while riding.
- When a child uses the scooter, please monitor riding at all times.
COMPONENT OF THE SET
- Shank with handlebars
- Platform with wheels
- 2x Hex key
HOW TO INSTALL
- Insert the shank with handlebars into a dedicated hole (fig. 2).
- Tighten up screws (D in fig. 2) with the use of the hex key supplied. Make sure the wheel and handlebars are properly positioned (fig. 3).
- Check to fasten of the product. If bolts are stable, the scooter is ready for use. If not, please tighten them up.
HOW TO BRAKE
- Press the rear mudguard with a left or right foot and simultaneously shift your weight to the back. Adjust the center of gravity while stopping to avoid falling down.
Note: The mudguard may get very got – make sure you do not get burnt.
HOW TO REPLACE WHEELS AND MAINTAIN BEARINGS
If you can see that the wheels are worn out, think about replacing them. Use the hex key to unscrew the bolt which attaches the wheel to the scooter frame. Remove the mounting mandrel and then the wheel. If the technical condition of bearings is good, keep them for another installation. To do so: remove bearings, clean them and apply a suitable amount of grease. Fix them again in the new wheel. If the technical condition of bearings in unsuitable, buy new ones and reinstall.
HOW TO CLEAN
- Clean the product with a wet cloth and soft detergent. After cleaning, wipe it dry.
- The pictures are for reference only. The product may differ from the pictures presented.
Read User Manual Online (PDF format)
Loading......