newair AF-1000 Series Remanufactured Evaporative Cooler Owner’s Manual

: June 6, 2024
: NewAir

Table of Contents

SPECIFICATIONS
REGISTER YOUR PRODUCT ONLINE
SAFETY INFORMATION & WARNINGS
PARTS LIST
ASSEMBLY & INSTALLATION
INSTALLING FILTERS
CLEANING & MAINTENANCE
TROUBLESHOOTING
A Name You Can Trust
Contact Us
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

newair AF-1000 Series Remanufactured Evaporative Cooler Owner’s Manual

SPECIFICATIONS

MODEL NO. AF-1000
VOLTAGE: 120/60Hz
CURRENT: 160W
FREQUENCY: 20 Liters

REGISTER YOUR PRODUCT ONLINE

Register Your Remanufactured NewAir Product Online Today!

Take advantage of all the benefits product registration has to offer:

Service and Support
Diagnose troubleshooting and service issues faster and more accurately.

Registering your product information online is safe & secure and takes less than 2 minutes to complete:

ARCAugusta.com/register-my-product.htm

SAFETY INFORMATION & WARNINGS

When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips:

Carefully read all instructions before use.
Check the condition of the unit after taking it out of the box. Ensure that all parts are in good condition.
Before using the unit, verify that the cooler’s voltage requirements correspond with your power outlet.
Do not use any appliance with a damaged cord or plug. If the cord is damaged, please contact an authorized service center.
Do not attempt to repair, adjust, or replace parts in the unit. Any repairs must be made by an authorized technician.
Do not place the unit near gas or electric stoves.
Caution should be taken when the cooler is used near children. The unit should not be left unattended for any extended period of time whie in operation.
This appliance should not be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety.
This unit is intended for household indoor use. Do not operate this evaporative cooler in bathrooms or in any other wet or damp locations.
Do not insert objects into the air louvers.
Use the “Power” button to turn the unit on or off. Do not control operation by pulling the plug from the power outlet.
To prevent the risk of electric shock, do not operate the unit with wet hands.
Save this instruction manual for future reference.
WARNING: TO Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.
WARNING: Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
The cells shall be disposed of properly, including keeping them away from children, even used cells may cause injury.

PARTS LIST

Product Overview

Control Panel
Air Louvers
Carrying Handles
Cord Wrap
Honeycomb Filter
Partition
Carbon Filter
Dust Filter & Rear Screen
Water Level Indicator
Casters
Water Tank
Drain Hole
Remote Control

ASSEMBLY & INSTALLATION

POWER: Connect the cord to a power outlet. An indicator light will turn on, indicating that the power source is connected. Press the “On/Speed” button to turn the unit on. When it turns on, the cooler will start at medium speed (number 2) and then drop to the low speed setting (number 1) after a few seconds.
SPEED: To adjust the fan speed, press the “On/Speed” button repeatedly until the desires speed appears on the display.
- Low Speed
- Medium Speed
- High Speed
OSCILLATION: To turn on the oscillation feature, press the “OSC” button once. The indicator will appear on the display. Press the “OSC” button again to turn off the oscillation feature.
TIMER: The unit comes with a 10-hour timer (max. 10 hours). To set the timer, press the “Timer” button. Each time the “Timer” button is pressed, 0.5 hour of operation time is added. To have the unit run continuously, make sure the timer is off.
- Press once – 0.5 hour
- Press twice – 1 hour
- Press 3 times – 1.5 hours
- Up to 10 hours
COOLING: Fill the tank with water and press the “COOL” button. The indicator light will turn on. To stop the unit from cooling, press the button again.
ADDING WATER TO THE TANK: Follow these steps to add water to the water tank:
- Pull off the water tank’s cover.
- Carefully pour water into the water tank.
- Do not exceed the “maximum” water line on the water level indicator.
- For enhanced cooling, add ice to the tank.

INSTALLING FILTERS

Remove the included filter from their packaging.
Unscrew the rear screen and install the two filters so that they are nearest to the rear screen, not the front of the unit. The order the filters are installed does not matter.
Close the rear screen and screw it back in.
Add water as mentioned in the previous section and your evaporative cooler is now ready to use.

CLEANING & MAINTENANCE

Before disassembling the unit, unplug the unit from the power outlet and drain all of the water from the tank by removing the drain cap.
Use a clean, damp cloth to wipe away any dust or dirt from the unit’s exterior. Also wipe down the air louvers.
CLEANING THE DUST FILTER: Clean the dust filter by unscrewing /pulling out the dust filter and washing the dust filter with running water.
CLEANING THE HONEYCOMB FILTER AND TANK: Clean the honeycomb filter and tank by following these steps:
- Unscrew and pull out the dust filter.
- Clean the honeycomb filter by using a vacuum or brush.
- Use a damp cloth with soap to clean and remove any residue from the water tank.
- Rinse and drain the water tank.
- Replace the honeycomb and dust filters back into the unit. Make sure the filters are properly inserted before tightening the screws.
NOTE: We recommend cleaning the unit every 3 months with regular use. However, if you have hard water with a high mineral content, we recommend cleaning the unit once a month to prevent residue buildup

TROUBLESHOOTING

Problem	Possible Causes	Solution
The unit produces no air	The unit is not plugged in.	Check to make sure the

plug is plugged into an outlet. The unit should beep twice once the power supply is connected
Check to make sure the plug is plugged into an outlet. The unit should beep twice once the power supply is connected| Make sure the water tank is locked into the back of the unit
The unit does not cool.| There is insufficient water in the tank.| Check the water level in the tank and make sure there is enough water.
The cooler/humidifier button was not pressed.| Press the COOLER/ HUMIDIFER button.
The pump is defective.| Contact customer service if there is an issue with the water pump
The unit does not cool on high speed.| The cooling pad is not sufficiently saturated with water.| If speed 3 is selected when in cooling mode, the unit will automatically revert to speed 2 for 5 minutes to allow the pad to be fully soaked. The cooler will automatically turn to speed 3 when the pad is soaked.
Water is coming out of the vents.| The cooling pad may be clogged with debris.| Clean the cooling pad by rinsing it in water and allowing it to thoroughly dry. You can also clean it with a water and vinegar solution. If the problem persists, contact customer service

A Name You Can Trust

Trust should be earned and we will earn yours. Customer happiness is the focus
of our business.

From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most.

Count on NewAir.

As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.