Crosby WLP Wirelink Plus Cabled Tension Load Cell User Manual
- June 5, 2024
- Crosby
Table of Contents
WLP user manual
v1.00
Part No: SU3398
Operating instructions
THIS MANUAL WAS WRITTEN IN THE ENGLISH LANGUAGE AND PROFESSIONALLY TRANSLATED TO ALL OTHER LANGUAGES CONTAINED WITHIN THIS DOCUMENT. PLEASE NOTE THAT STRAIGHTPOINT ACCEPT NO RESPONSIBILITY FOR ANY ERRORS OR OMISSIONS.
EU DECLARATION OF CONFORMITY
Product: Wirelink Plus WLP
Product Description:
Non-indicating tension Loadcell 1t – 300t capable of both weighing and dynamic
load monitoring. Designed for use with Crosby Straightpoint’s Handheld plus
digital display, desktop controller PC software (DCP10M) or other form of
instrumentation.
Constructed from high-quality aerospace grade aluminium that provides a high
strength to weight ratio, and allows the use of a separate internal sealed
enclosure for the load cell’s electronic components, rated to IP67 or NEMA6
environmental.
Includes 90db audible set point alarm and RS-485 serial output.
Marking:
Manufacturer: Straightpoint (UK) Limited, Unit 9, Dakota Park, Downley
Road, Havant, Hampshire, PO9 2NJ, United Kingdom
This conformity is based upon compliance with the application of harmonized or applicable technical standards and, where applicable or required, a European Union Notified Body certification.
Directives: The described product above, is in conformity with:
EU Machinery Directive 2006/42/EC;
EU EMC Directive 2014/30/EU
EU RoHS 2011/65/EU
Applicable Harmonised EU Machinery Directive 2006/42/EC
Standards: EN ISO 12100:2010 Safety of machinery – General principles for
design Risk assessment and risk reduction.
EMC Directive
BS EN 55011:2016+A11:2020 Industrial, scientific and medical equipment. Radio-
frequency disturbance characteristics. Limits and methods of measurement;
EN 61326-1 Electrical equipment for measurement, control and laboratory use,
EMC requirements, Part 1, General Requirements;
EN 61000-6-1 Electromagnetic compatibility (EMC), Part 6.1, Generic
Standards Immunity for residential, commercial and light industrial
environments.
RoHS
EN IEC 63000:2018 Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous substances.
Notified Body: Self-declared.
Quality Management: ISO 9001:2015 Quality Management Systems Requirements: BSI Certificate No. FM 584438
Straightpoint (UK) Limited declare that under our sole responsibility for the manufacture and supply of the product detailed above, that it conforms to the essential health and safety requirements of the listed applicable Directives and applicable harmonised technical Standards.
EU Authorised Representative:
CROSBY EUROPE Industriepark Zone B N°26 B-2220 Heist-op-den-Berg Belgium
Phone: +32 0 15 75 71 25 Email:
Signed, on behalf of Authorised Representative:
Name: Thomas Dietvorst
Position: General Manager
Date: October 20th 2021
DECLARATION OF CONFORMITY
Product: Wirelink Plus WLP
Product Description: Non-indicating tension Loadcell 1t – 300t capable of
both weighing and dynamic load monitoring. Designed for use with Crosby
Straightpoint’s Handheld plus digital display, desktop controller PC software
(DCP10M), or other form of instrumentation.
Constructed from high-quality aerospace-grade aluminium that provides a high
strength-to-weight ratio, and allows the use of a separate internal sealed
enclosure for the load cell’s electronic components, rated to IP67 or NEMA6
environmental.
Includes 90db audible set point alarm and RS-485 serial output.
Marking:
Manufacturer: Straightpoint (UK) Limited, Unit 9, Dakota Park, Downley Road,
Havant, Hampshire, PO9 2NJ, United Kingdom
This conformity is based upon compliance with the application of UK Statutory Instruments (and their amendments) and/or applicable technical standards’; and, where applicable, or required, UK Notified Body certification.
UK Regulations: The described product above, is in conformity with:
The Supply of Machinery (Safety) Regulations 2008;
The Electromagnetic Compatibility Regulations 2016;
The RoHS Regulations 2012.
Applicable Designated The Supply of Machinery (Safety) Regulations 2008
Standards: EN ISO 12100:2010 Safety of machinery – General principles for
design Risk assessment and risk reduction.
The Electromagnetic Compatibility Regulations 2016
BS EN 55011:2016+A11:2020 Industrial, scientific and medical equipment. Radio-
frequency disturbance characteristics. Limits and methods of measurement;
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory
use, EMC requirements, Part 1, General Requirements;
EN 61000-6- EN 61000-6-1:2019 Electromagnetic compatibility (EMC), Part 6.1,
Generic Standards Immunity for residential, commercial and light industrial
environments.
The RoHS Regulations 2012
EN IEC 63000:2018 Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous substances.
UK Notified Body: Self-declared.
Quality Management: ISO 9001:2015 Quality Management Systems Requirements: BSI Certificate No. FM 584438
Straightpoint (UK) Limited declare that under our sole responsibility for the manufacture and supply of the product detailed above, that it conforms to the essential health and safety requirements of the listed applicable UK Regulations and applicable designated technical Standards.
Technical Documentation Available From: Straightpoint (UK) Limited, Unit 9, Dakota Park, Downley Road, Havant, Hampshire, PO9 2NJ, United Kingdom
Signed, on behalf of Straightpoint (UK) Limited:
Name: Thomas Dietvorst
Position: General Manager
Date: October 20th 2021
SQS752 Issue 1
Registered in England No. 4375389 · VAT Registered No. 793 2451 14
Registered Office: Unit 9. Dakota Par k. Down ley R d. Havant. Hampshire P09
2NJ · UK
General description and warnings
All products manufactured and sold by Straightpoint Ltd, are sold with the express understanding that the purchaser and user are thoroughly familiar with the safe use, proper care and application of the product. Responsibility for the safe use, proper care and application of the product rests with the user. Failure of the product can occur due to misapplication, abuse, overloading, or improper care and maintenance. There are numerous government and industry standards that cover products manufactured and sold by Straightpoint Ltd. This document makes no attempt to reference all of them. We do reference standards that are most current like ASME B30.26-2010 “detachable load indicating devices.” Ratings shown in Straightpoint Ltd literature are only applicable to new or “as new condition” products. Rated capacities define the greatest force or load a product can carry under usual or normal environmental conditions. Shock loading and extraordinary conditions must be taken into account when selecting products and product capacity. Some of the products in the Straightpoint Ltd catalogues are designed for use with rigging hardware and components which could be supplied from several different manufacturers. It is crucial that you read and understand the literature from these manufacturers, as well as governmental standards and industry technical manuals. The rated capacity, design factor and efficiency rating of each Straightpoint Ltd product may be affected by wear, misuse, overloading, corrosion, deformation, intentional alteration, age and other use conditions. The recommended proof load on all items manufactured and sold by Straightpoint Ltd is twice the working load limit (WLL), unless otherwise shown. Proof testing is included on all Straightpoint Ltd load indicating products.
WLP six-way socket
WLP connection
Before using the Wirelink PlusTM take some time to read this manual and familiarise yourself with it. Plug the handheld display or other instrumentation into the six-way socket illustrated on the two previous pages. If using the Straightpoint Handheld Plus (HHP) refer to user manual SU3343.
WLP ICA wiring boards
If your Wirelink PlusTM has an ICA analogue output option fitted then the following five diagrams show how it should be connected.
This device requires a bipolar power supply.
Product aftercare
While these devices are sealed to IP65/NEMA4X standards, they should not be
immersed in water.
The effects of solvent on the device can not be guaranteed, and should
therefore be avoided.
Avoid use within 20-30 minutes of rapid changes in temperature, for example
moving the device from a cold vehicle into a warm room.
The change in temperature can affect the accuracy of the device. The operating
temperature is -10 to +50° C or 14 to 122° F.
Should the display show “OVERLOAD” remove the load immediately as this
indicates an overload situation.
Check that the load applied is within the working load limit of the device. If
it continues to display overload, contact your supplier.
Service and calibration
These products are supplied with a certificate of calibration which is valid for one year. After this date, it is recommended the device is recalibrated by Straightpoint or an approved calibration laboratory. Contact the Straightpoint service department or your supplier for more information. In the unlikely event of this device failing, fit new batteries and re-test. Only when this has been done should you contact your supplier to report the fault. When reporting the fault it is important to give a full description of the problem and the type of application the device is being used for.
Warranty
Straightpoint (UK) Ltd warranty this product against malfunction for a period
of two years from manufacture.
Conditions of warranty:
- The equipment is used as described exactly in the operators manual supplied.
- Whilst we make every effort to ensure each device is calibrated before despatch, Straightpoint (UK) Ltd do not accept responsibility for inaccurate readings indicated by this equipment.
- In the event of malfunction, the device is returned to the manufacturer: Straightpoint (UK) Ltd, Unit 9 Dakota Park, Havant, Hampshire, UK, PO9 2NJ.
- If we consider any malfunction to be caused by misuse, this warranty is void and any repair will be charged for accordingly.
Crosby | Straightpoint
Unit 9, Dakota Park, Downley Road, Havant, Hampshire, PO9 2NJ UK · Tel: +44
(0)2392 484491
2801 Dawson Road, Tulsa, OK 74110 · USA · Tel: +1
918-834-4611
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>