LEDOLUX POLAND PARK DROP DOB Ceiling Light Instruction Manual
- June 9, 2024
- LEDOLUX POLAND
Table of Contents
LEDOLUX POLAND PARK DROP DOB Ceiling Light
Product Information
The product is a LED luminaire designed for park lighting, car park lighting and exterior lighting. The product is manufactured by Ledolux Poland Sp. z o.o. The nominal voltage for the product is 205-260V~, with a frequency of 50/60Hz. The colour temperature is 4000K, and the luminous efficacy is 150lm/W. The beam angle is asymmetrical, and the operating temperature is suitable for mounting heights of 2-10m. The product weighs 10.5kg and has an internal mounting diameter that should be grounded when installed on composite poles.
Product Usage Instructions
- Before installation, make sure to disconnect the power supply in the circuit.
- The luminaire must be installed by an authorized person. If there are any doubts about the installation or use of the LED luminaire, consult a qualified electrician or technician.
- Replace the luminaire after a failure. Self-repair shall void the warranty.
- Keep the luminaire in a cool, dry and clean environment. Keep away from water and fire.
- Protect your eyes by avoiding looking at the light for a long period of time.
- Dirtiness that settles down on the luminaire due to normal operation shall be cleaned with a damp cloth. Do not use invasive cleaners or cleaning methods.
- When installing luminaires on composite poles, it is absolutely necessary to ground the fixture. In case of any problems in this matter, please consult the manufacturer.
- Make sure to turn on the power after connecting and securing all luminaires in the circuit.
- If the light source needs to be replaced, only the manufacturer or their service representative or a similarly qualified person should do it.
P /P in [W] | Wymiary ØxH [mm] | Waga [kg] |
---|---|---|
10 – 50 | 441×357 | 10.5 |
Instruction manual
EN: Instruction manual|
---|---
NOMINAL VOLTAGE|
205 – 260V ~
FREQUENCY|
50 / 60Hz
COLOUR TEMPERATURE|
4000K
LUMINOUS EFFICACY|
150lm/W
KĄT ŚWICENIA| LICHTVERTEILUNG|
Asymmeric
OPERATING TEMPERATURE|
-40°C ÷ +45°C
MOUNTING HEIGHT|
2 – 10m
1
When installing luminaires on composite poles, it is absolutely necessary to ground the fixture . In case of any problems in this matter, please consult the manufacturer.
Internal mounting diameter :
Make sure you disconnect the power supply before installation.
-
Bring the power cord (2×1.5mm). Connect the luminaire wire to the power cord as indicated below. Use a connector with an appropriate degree of protection IP. N o PE cord for protection class II.
-
Mount the luminaire on the pipe. The outer diameter of the mounting of the handle is ø48 50mm. Lock the luminaire in position by sliding the screw between the holes in the pipe and the mounting bracket.
Connecting the power cable
-
Brown
-
Green yellow
-
Blue
-
Black
-
White
BRAK W ZESTAWIE | NOT INCLUDED
NOTE|
---|---
The luminaire must be installed by an authorized person. In case of doubts as
to the installation or use of the LED luminaire, consult a qualified
electrician or technician|
Replace the luminaire after a failure. Self-repair shall void the warranty.|
Keep the luminaire in a cool, dry and clean environment. Keep away from water
and fire.|
Make sure you disconnect the power supply before installation. Turn on the
power after connecting and securing all luminaires in the circuit.|
The light source used in this luminaire should only be replaced by the
manufacturer or their service representative, or a similarly qualified
person.|
Protect your eyes, avoid looking at the light for a long period of time.|
Dirtiness that settle down on the luminaire due to normal operation shall be
cleaned with a damp cloth. Do not use invasive cleaners or cleaning methods.|
APPLICATION|
- Park lighting,
- Car parks lighting
- Exterior lightning
|
Ledolux Poland Sp. z o.o.| E-mail:
info@ledolux.pl Tel: +48 696 966 622
Data: 02.02.2022
We reserve the right to make design changes to luminaires.