lionelo Mona Baby Highchair User Manual

Table of Contents

lionelo-Mona-Baby-Highchair-
PRO

Warnings for highchair:

Never leave the child unattended
Always use the restraint system.
Falling hazard: Prevent your child from climbing on the product.
Do not use the product unless all components are correctly fitted and adjusted.
Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
Be aware of the risk of tilting when your child can push its feet against a table or any other structure
Do not use the product until the child can sit on its own.
Do not use the product if any of its parts is missing or any element is damaged or torn.
Do not let your child get close when you assemble and disassemble this product.
The product is intended for children who can sit on their own.
The product can be used by children aged 0,5-3, and whose weight does not exceed 15 kg.

Warnings for booster seats:

Never leave the child unattended.
Always use the restraint system and ensure it is correctly fitted.
Always use the chair attachment system and ensure it is correctly fitted before use.
Always check the security and the stability of the product on the adult chair before use.
Do not use this product on stools or benches.
The product is intended for children who can sit on their own. The product can be used by children aged 0,5 to 3, and whose weight does not exceed 15 kg.
After attaching the booster seat on the adult chair, assure a proper position in which the child cannot use its feet to push the table or other surface. This may cause the adult chair along with the booster seat to collapse.
Do not use the product if any of its part is missing or any element is damaged.
Do not use accessories or spare parts other than recommended by the manufacturer.

lionelo-Mona-Baby-Highchair-2

lionelo-Mona-Baby-
Highchair-3

There are letters (R, R1, L, L1) embossed on plastic tips. During assembly, adjust parts in the following way:

Put 2 legs of the highchair (A) into 2 plastic front sheaths (R1, L1), until you hear a characteristic click
Put 2 legs of the highchair (B) into 2 plastic rear sheaths (R, L) until you hear a characteristic click
Put 4 long legs (A and B) into designated places (R, R, L, L) in the seat base (L), until you hear a characteristic click
Fix 3 metal connectors of the highchair (G and H) between high legs, adjust connectors and tighten 4 screws (N). To do so, use the Allen key (O). Assemble the footrest (J) to finish the procedure
Put the seat with backrest (K) into the seat base (L), until you hear a characteristic click
Put the plastic tray on (I)
Put the top silicone tray on (P).
Check if the chair is stable
Put the child in and secure with 5-point belts located in the seat covering.

lionelo-Mona-Baby-
Highchair-5

There are letters (R, L, RR, LL) embossed in the plastic tips. During assembly, adjust parts in the following way:

Put 4 legs of the low chair (E), front (RR, LL) and rear (L, R) in spots marked in the seat base (L), front and rear (R, L, R, L), until you hear a characteristic click
Fix 2 metal connectors of the low chair (F) between low legs, attach connectors with 4 screws (N) to the chair legs. To do so, use the Allen key (O). Assemble the footrest (J) to finish the procedure
Put the seat with backrest (K) into the seat base (L), and then put the plastic tray on (I), until you hear a characteristic click
Put the top silicone tray on (P).
Check if the chair is stable
Put the child in and secure with 5-point belts located the seat covering.

Attach the booster seat with two fixing belts supplied. Follow the steps below:

Assembly of the booster seat (2) with the use of a fixing belt (M) on the chair through the seat bottom (K):
- Carry the belt (M) through two holes in the seat bottom (K)
- Carry the belt through the adult chair and lock the buckle, next tighten the belt to have a relevant length
Assembly of the booster seat (2) with the use of a fixing belt (M) on the chair through the backrest (K)
- Carry the belt (M) through two holes in the seat backrest (K)
- Carry the belt through the adult chair and lock the buckle, next tighten the belt to have a relevant length
- Check if the booster seat has been properly positioned with the use of the fixing belt
- Put the child in and secure with 5-point belts located in the seat covering.

Suitable sizes of the chair for assembly of the booster seat on the chair:
Pay attention to the following sizes of the adult chair:

Silicone tray (P):

In case of any dirt on the tray, you can wash it in the dishwasher.
Wash it in the dishwasher, in a basic mode, at the temperature of 65˚C, with the use of soft chemicals (class A).
Do not use the tray if you can see any fabric damage, e.g. slits or scratches. Pieces of the damaged tray may pose a threat to your child’s health.
Note! The child must not use the booster seat while the chair is being assembled, adjusted or disassembled.