lionelo Linn Plus Baby Highchair User Manual
- June 5, 2024
- lionelo
Table of Contents
lionelo Linn Plus Baby Highchair
Dear Customer!
In case of any questions or comments on the purchased product, please contact
us: [email protected] Before you use the product for
the first time, please read this manual. This product meets the requirements
of: EN 14988:2017+A1:2020. Producer: BrandLine Group Sp. z o. o. ul. A.
Kręglewskiego 1, 61-248 Poznań, Poland
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
WARNING:
- Never leave the child unattended.
- Always use the restraint system.
- Falling hazard: Prevent your child from climbing on the product.
- Do not use the product unless all components are correctly fitted and adjusted.
- Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
- Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
- Do not use the product until the child can sit up unaided.
- Do not use the product if any part is broken, torn or missing.
- Always apply the parking device when the product is not being moved.
- Keep children away when unfolding and folding the product to avoid injury.
- The product is intended for children able to sit up unaided and up to 3 years or a maximum weight of 15 kg.
Product description
- Seat cover
- Safety belts
- Backrest adjustment button
- Double tray
- Tray adjustment button
- Tray top
- Crotch cover
- Lap strap
- Footrest
- Base unfolding button
- Height adjustment button
- Front base
- Support
- Base connector
- Rear base
Assembling
Unfolding
Press the button and holding it unfold the frame
Bases
Slide the front base into the front frame tubes, and the rear base into the
rear frame tubes. Push them firmly to lock the pins in the openings
Tray
Combine the crotch cover with the tray by sliding the latter into the guides
until you hear a click
Press the buttons on both sides of the bottom of the tray base and slide the
tray into the guides (please, see the above picture). Once you hear the click
sound it means the tray has been properly locked into the guides. Ensure that
the tray is properly secured 
Footrest
Place footrest under the seat. Use provided two screws and a screwdriver (not included) to fix its position
Safety belts
To fasten the safety belts:
hook the clasps of the shoulder straps to the corresponding buckles of the lap
straps; then connect the lap straps buckles to the main buckle (fig. 7).
To unfasten the safety belts:
press the buttons of the main buckle and unfasten the belts; then unhook the
clasps of the shoulder straps from the lap straps buckles. To adjust the
tension of the belts, move the adjusting clasps forward or backward.
WARNING : To ensure the safety of the child:
- The position of the lap straps should be properly adjusted to the height of the child. The straps should be close to the child’s body, but they still should not hinder their movements.
- The lap strap should be adjusted in a way so that it runs at the lower part of child’s hips.
- While locking the lap straps buckles in the main buckle you will hear a click sound.
- If the safety harness is damaged, it must be repaired immediately. Any repairs can be performed by authorized service centre only.
Backrest
The backrest can be adjusted to 3 different positions (please, see the
pictures on the left). To change the angle of the backrest, press the backrest
adjustment button (behind the backrest) and choose one of the three available
backrest angles Height adjustment
To adjust the seat level, press both height adjustment buttons simultaneously
(please, see the above picture) and set a desirable seat level
WARNING: Do not adjust the height of the chair if there is a child sitting on it.
8. Folding
Press and move the buttons on both sides of the bottom of the tray (please,
see the above picture) and slide it off the guides.