lionelo LO-ZANNA Zanna High Chair User Manual

: June 5, 2024
: lionelo

Table of Contents

Important

Zanna
Baby highchair

Dear Customer!
In case of any questions or comments on the purchased product, please contact us:
help@lionelo.com

Producer:
BrandLine Group Sp. z o. o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

Important

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

Never leave the child unattended.
Always use the restraint system.
Falling hazard: prevent your child from climbing on the product.
Do not use the product unless all components are correctly fitted and adjusted.
Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
Do not use the product until the child is ready to sit on its own.
Do not use the product if any of its parts is missing or any of its components is broken or torn.
Do not let the child get close when you are assembling or disassembling this product to avoid injuries.
The product is intended for children who can sit on their own.
The product can be used by children aged 0,5 to 3, whose weight does not exceed 15 kg.
Use original spare parts only.
Before use, make sure the product has been completely unfolded – wheels must not touch the floor.

List of parts (fig. A)

Tray
Seat
Crotch guard
Tray guides
Upper part of chair frame
Frontal lower part of chair frame
Rear lower part of chair frame
Safety belts

How to assemble

Put the crotch guard in the tray (fig. 1).
Put the upper part of the frame in holes in the seat, and then connect it to lower part of the frame (fig. 2). Locking keys should be outside. If you can hear a click, the installation is correct.
Put tray guides (A, fig. 3) on seat connectors. Pay attention to marking on the left and right side: functional keys should be located on the outer side of the product.
To remove guides, slide the key on their outer side and remove guides.
T unfold the chair, slide levers at the top of the frame (A, fig. 4) and spread the product. If you can a hear a distinctive click, the chair has been unfolded correctly.
Slip the tray onto guides, keeping adjustment keys pressed (A, fig. 6). You can set the tray in one of three positions. Make sure the tray is stable.
The semi-automatic unfolding system activates when you pull the lever in the upper part of the frame and start unfolding the product. The system is effective on slippery surfaces, such as tiles, panels, etc. The system remains ineffective on such surfaces as carpets, sheet flooring, etc.

How to adjust the seat

To raise or lower the chair seat, press height adjustment keys (A, fig. 5) and set the desired height of the seat.
If you release the keys, you can secure the seat at the desired height.
The seat in the lowest position must not rest on leg locking elements (fig. 12). Set the seat in the lowest position and then gently lift it. You will hear a distinctive click indicating the seat has locked.

How to adjust the footrest

There are two ways you can adjust the footrest – inclination angle adjustment and footrest length adjustment.
Lift the footrest to secure it in a higher position.
To lower the footrest, press inclination angle adjustment keys (A, fig. 7) and set the footrest in a desired position.
To change the footrest length, press length adjustment keys (B, fig. 7) and set the desired length.

How to adjust the backrest

To adjust the chair backrest angle, pull the lever at the back of the seat and set the backrest in a desired position (fig. 8). There are four backrest positions you can choose.

How to assemble and disassemble safety belts

To assemble the belts, pull them through relevant holes in the fabric covering and in the seat (fig. 9). You can choose two heights of belts.
Place the plastic guard in relevant holes (fig. 10). Pull the belt and make sure it has been properly locked in the seat.
To fasten the belts, put them into the buckle. To undo the belts, press the key in the center of the buckle.
To disassemble belts, remove the protection (fig. 10) and pull the belts through holes in the seat.

How to fold the chair

Pull levers in the upper part of the frame (A, fig. 4). When you raise the chair, frontal and rear legs will fold automatically.
You can remove and suspend the tray on rear legs of the chair (fig. 11).
Note! The chair is equipped with four wheels for easier transportation of the folded product. To move the chair elsewhere, lift and incline it so that wheels contact the floor.