lionelo LO-MIKA Mika Baby Stroller User Manual

** lionelo LO-MIKA Mika Baby Stroller

**

Dear customer

Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com
Before you use the product for the first time, please read this operating manual carefully. The wrong use of the product may pose a threat to a child’s life.

The product meets the requirements of the following standards: EN 1888-1:2018, EN 1888-2:2018, and EN 1466:2014+AC:2015.

Producer

BrandLine Group Sp. z o.o.

IMPORTANT-READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

FOR STROLLER

1. Never leave the child unattended.
2. Ensure that all the locking devices are engaged before use.
3. To avoid injury ensure that the child is kept away when unfolding and folding this product.
4. Do not let the child play with this product.
5. This seat unit is not suitable for children under 6 months
6. Always use the restraint system.
7. Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
8. This product is not suitable for running or skating.
9. This product is suitable for children aged 6 months 4 years and whose weight does not exceed 22 kg, depending on what happens earlier.
10. If you want to take the child out of the stroller or put it inside, make sure the parking mechanism on the wheel is locked.
11. The maximum load capacity of the basket is 3 kg.
12. Any load on the handle, backrest, or sides of the stroller may affect its stability.
13. The product is intended for one child only.
14. Do not use accessories that have not been approved by the manufacturer.
15. If you use special adapters to attach a carrier that can also be used as a child safety seat, remember that it does not replace a cot. If your child needs to sleep, put it in a suitable cot.
16. Use only spare parts supplied or recommended by the manufacturer.
17. Keep the product away from fire and sources of heat.
18. Do not use the product on stairs.

IMPORTANT Read the instructions carefully before use and keep them for future reference

FOR CARRYCOT

1. This product is only suitable for a child who cannot sit up unaided.
2. This product is not suitable for children who can sit down or turn to the other side or lift on their own hands and knees. Child’s maximum weight: up to 9 kg.
3. Only use on a firm, horizontal level, and dry surface.
4. Do not let other children play unattended near the carrycot.
5. Do not use if any part of the carrycot is broken, torn, or missing.
6. Use only spare parts supplied or recommended by the manufacturer.
7. Keep the product away from fire and sources of heat.
8. The bottom and grips of the carrycot must be regularly checked for any signs of damage and wear.
9. Make sure the handle is mounted and locked in a suitable position before you lift or move the carrycot.
10. The child can be transported in a carrycot.
11. Child’s head in the carrycot must not be lower than its body.
12. Do not place any additional mattresses inside the carrycot.

**List of stroller parts

**

1. Handle
2. Bow releasing key
3. Footrest adjustment key
4. Rear wheels
5. Front wheels
6. Safety belts
7. Shoulder protective cushions
8. Sunshade
9. Handle height adjustment key
10. Parking mechanism
11. Basket
12. Bow
13. Seat backrest angle adjustment lever
14. Carrycot adapter
15. Child safety seat adapter

The set 2 in 1 is composed of a stroller frame with a seat and carrycot. List of carrycot parts

1. Handle
2. Sunshade adjustment keys
3. Mattress
4. Cover

Assamble

How to unfold the stroller frame

1. Unfold the stroller frame by pulling the handle up until you can hear a click which signals the correct unfolding of the stroller frame
2. Press the handle height adjustment key to set the desired height. If you can hear a click, it means the handle has been set at the desired height.

How to install and detach front wheels

1. Insert the wheel shank into corresponding holes on the stroller frame Correct installation is signaled by a click.
2. To detach the front wheels, press the releasing key and take the wheels out.

How to install and detach rear wheels

1. Insert the wheel shank into corresponding holes on the stroller frame correct installation is signaled by a click.
2. To detach the rear wheels, press the releasing key and take the wheels out.

How to install the bow

1. Insert the bow into corresponding holes on the stroller frame. Correct installation is signaled by a click.
2. To detach the bow, press releasing keys and then take the bow out.

How to install and detach the seat

1. The seat can be installed in a forward- or rear-facing position.
2. Place the seat on connectors on the stroller frame. Correct installation of the seat on the stroller frame is signaled by a click. Make sure the seat has been correctly installed in the stroller frame.
3. To detach the seat from the stroller frame, push release levers on both sides of the seat and then lift it upwards.

How to install and detach the carrycot
The child can be transported in the carrycot.

1. Undo the inner covering zip and insert metal bars into carrycot brackets.
2. Zip the inner covering up and then insert the mattress.
3. Put the fabric cover on the carrycot handle, and then pull up the zipper. To unfold the sunshade, press the keys on both sides of the carrycot and set the sunshade in the desired position.
4. Insert adapters into corresponding spots on the stroller frame until you can hear a double click and adapters get blocked. Adapters must be placed with the detachment key in a stroller’s front direction.
5. The carrycot is a stroller frame that must be installed in a way that the child is facing the parent who pushes the stroller.
6. Place the carrycot on the stroller frame with the use of adapters
7. You will hear a distinctive click. Make sure the carrycot has been properly attached to the stroller frame.
8. To detach the carrycot from the stroller frame, press releasing keys on both sides of the carrycot and then lift the carrycot.
9. To remove the adapter, press the lower key on the adapter and pull upwards.

How to install and detach the child safety seat
(applies to the set with Astrid’s car seat) Insert adapters into corresponding spots on the stroller frame until you can hear a double click and adapters get blocked. Adapters must be placed with a detachment key in a stroller’s front direction.

1. The child safety seat in the stroller frame must be installed in a way that the child is facing the parent who pushes the stroller.
2. Place the child safety seat on the stroller frame with the use of adapters. You will hear a distinctive click. Make sure the child safety seat has been properly mounted on the stroller frame.
3. To detach the child safety seat in case it is necessary, remove it from the adapters.
4. To remove the adapter, press the lower key in the adapter and pull upwards.

How to adjust safety belts

1. Insert belts in the central buckle until you can hear a click. To remove belts, press the key on the central buckle.
2. To adjust the height of the belts, pull them through relevant holes in the seat so that they correspond to the child’s height. You can fasten belts at three height levels.

How to install and detach safety belts

1. To detach the belts, pull the buckle through the hole in the seat. To install them, insert belts again.

Rotating wheel locking key

1. To unlock the rotation of the front wheels, slide the lock key to the left. To lock it, slide the lock key to the right.

Parking mechanism

1. To lock, press the pedal as shown by arrow no.1. To unlock, press the pedal as shown by arrow no. 2.
   Note: make sure the stroller is locked when parked.

How to adjust the backrest

1. To set the seat in the desired position, use the backrest angle adjustment lever which you can find at the back of the seat.
2. There are three backrest inclination angles available.

How to adjust the handle

1. Press the handle adjustment key and then pull out or insert the handle, choose one of three available heights.

How to adjust the footrest
To change the position of the footrest, press the footrest adjustment keys on both sides and then push upwards or downwards, depending on your preferences .

How to fold the stroller frame in a forward-facing position

1. To fold the stroller frame with a seat in a forward-facing position, lower the handle to the lowest position and leave the rotating front wheels unlocked. Lift the footrest with the seat to the highest position and fold it towards the backrest.
2. Slide the key on the handle under the seat to the left and then dynamically lift the folded stroller.

How to fold the stroller frame in a rear-facing position

1. To fold the stroller frame with a seat in a rear-facing position, lower the handle to the lowest position and leave the rotating front wheels unlocked. Lift the footrest and the seat to the highest position and then slide the backrest towards the bow.
2. Slide the key on the handle under the seat to the left and then dynamically lift the folded stroller.

How to clean and maintain

1. Regularly remove dust and sand from the wheels and frame. You can use a wet cloth to clean these parts.
2. Use a wet cloth to clean the stroller upholstery and basket.
3. You must wash the carrycot upholstery and mattress cover by hand, at the temperature of 30˚C. Do not dry mechanically.
4. Check particular parts of the stroller on a regular basis for their functions, durability, and potential damage. In case of any defects, please contact the authorized service center.
5. Avoid excessive direct exposure of the stroller to sunlight and longtime exposure to high temperatures. Sunlight may cause fabrics to fade.
6. Do not use strong chemicals to clean this product. The pictures are for reference only. The real design of the products may differ from the pictures presented.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>