BUXTON BTW 4600 Wireless Stereo Earphones User Manual
- June 4, 2024
- BUXTON
Table of Contents
BUXTON BTW 4600 Wireless Stereo Earphones
Safety instructions
This product has been designed with the utmost safety in mind. However,
incorrect use may lead to electric shock or fire. This is why users should
observe the following instructions when using this device. This device uses a
semiconductor unit and contains no user serviceable parts. Do not disassemble
this device, otherwise you are exposed to the risk of electric shock. If any
damage to this product occurs, please have this product repaired by a
qualified service technician.
Power
The power supply of this device must comply with the parameters indicated on
the type plate.
Heat source
Keep this unit out of heat sources like stove or direct sunlight.
Cleaning
Prior to cleaning, please disconnect power first. For cleaning, don’t use
liquid detergents or caustic liquids – just clean the unit with a soft cloth.
Heavy objects
Do not place heavy objects on this unit, otherwise the unit may be damaged.
Faults to be repaired
If any of the following problems occurs, please disconnect power to the unit
and contact a qualified service technician.
- A. The power cord or plug has been damaged.
- B. Fluids or other foreign objects have entered the unit.
- C. If the unit does not work, even though you operate it according to the instructions, do not press any buttons other than those listed. Otherwise, damage to this unit may occur along with a more demanding repair.
- D. The unit fell from a high place to the ground.
- E. There is a smell of burning from inside the unit.
Maintenance
If you don’t have enough technical knowledge necessary to maintain this unit, don’t attempt to repair it by yourself. By removing the cover, you are exposed to a risk of electric shock. If needed, please contact a qualified service technician.
Replacement of parts
If you need to replace any part of this unit, ask your service technician to
make a replacement for equal spare part models. Replacement with other models
of spare parts may cause serious malfunction, electric shock or shorten the
life of the device.
Safety inspection
When done with the maintenance, ask your service technician to perform an on-
site safety check to make sure that the unit’s operation is safe.
Remark:
Before using this product, read these instructions carefully and keep it well
for future use.
WARNING
Extremely loud music can mask traffic sounds or other danger signals. Make
sure you never lose track of what’s happening in your surroundings.
Supply content
- A) 1X “L” and “R” earphone
- B) 1X Charging case
- C) 1X User’s manual
- D) 1X USB-C charging cable
Description of the BT earphones
| 1 | Left earphone |
|---|---|
| 2 | Charging case |
| 3 | Right earphone |
| 4 | Lighting effect of BUXTON charging case |
| 5 | LED charging indicator |
| 6 | USB-C charging connector |
| Left and right earphone function | |
| 7 | Touch pad for earphone control |
| 1 x short touch during an incoming call – |
answer the call
| 1 x long touch (2 seconds) during an
incoming call – call rejection
| 1 x short touch during an ongoing call
– end call
---|---
| 1 x short touch – play function
| 1 x short touch – pause function
|
| Left earphone
7| Long touch in music mode – volume
down
| 2 x short touch – previous track
| 3 x short touch – launch SIRI/Google
assistant
| Right earphone
7| Long touch – volume up
| 2 x short touch – next track
| 3 x short touch – Game mode / Music
mode
8| Microphone/LED indicator
9| Earphone recharging contacts
Putting into operation
Before first use, be sure to read the safety instructions contained in this
user’s manual carefully. Before using the earphones for the first time, remove
the protective film from the charging contacts on the bottom of the earphones
and return them to the charging case. Start charging the charging case and the
earphones to the maximum level.
Turning on the earphones
Taking earphones out of the case will automatically switch them on. If the
earphones are turned off outside the charging case, press and hold the touch
pad on each earphone and wait for the greeting.
Turning off the earphones
the earphones into the charging case will automatically turn them off. They
can also be turned off by long pressing and holding the touch pad until the
message appears in unpaired mode.
Pairing earphones with each other earphones are already paired from the
factory, so no further pairing is required. (If pairing to TWS mode fails,
return the earphones to the charging case and repeat the above instructions).
Warning: always keep the volume level of your device to a minimum before
connecting BT earphones to your mobile device. Keep the touch control pad
clean and avoid contact with other objects or body parts, such as hair.
Note: If the BT earphones are not paired with any device, they will turn
off if they are idle for a long time. Therefore, put them in the case.
Pairing your earphones via Bluetooth
To pair BT earphones with your mobile device, do the following:
Remove the earphones from the charging case and search for the Bluetooth
earphones name pair and start the pairing process. If you are asked to enter a
pairing code when pairing your device and BT earphones, use the code
To cancel pairing, disconnect the BT earphones (cancel Bluetooth pairing) on
your mobile device.
Remark: Bluetooth connection, keep a distance of up to 10 metres between
the BT earphones and the paired device. Depending on ambient interference, in
some cases it may be necessary to keep a shorter distance between the BT
earphones and the paired device.
Charging
A charged battery lasts for several hours of operation at normal volumes. A
high volume consumes more battery power; therefore, we recommend listening at
normal volume levels. When the BT earphones are placed in the charging case,
the LED indicators of the case show the statuses:
Charging case indicator:
When the USB-C charging cable is connected, a slow intermittent red indication
shows the charging of the charging case. Discharged charging case is indicated
by a slow intermittent blue indication – connect the charging cable. Fully
charged charging case is indicated by a red solid indication.
Earphones LED indicator:
Charging of the earphones is indicated by a green LED on each of them. When
the LED goes off the earphones are fully charged and ready to use. Pairing the
headphones will be indicated by green and white intermittent LED indication.
Attention: For charging, use only the original accessories supplied with
the appliance. To achieve maximum battery life, it is advisable to start
charging the battery only after a low state of charge (10% to 20%) has been
reported. Charge continuously until fully charged. If the battery discharges
quickly during operation, its lifetime is over. For more information, we
recommend contacting an authorised service centre.
Recommendation: If your earphones are not to be used for an extended
period of time, we recommend to fully charge the batteries once every two to
three months. We recommend storing the BT earphones together with the charging
case with a charged battery to avoid irreversible battery damage (loss of
capacity).
Technical specifications
- Bluetooth: V5.1 BLE
- BT connection range: 10m
- BT profiles: A2DP 1.3, AVRCP 1.6, HFP 1.7, HSP 1.2
- Bluetooth frequency response range: 2.4 GHz – 2.4835 GHz
- Maximum transmitter power: 100 mW Chipset: Jieli AD6973D4
- Codec: AAC, SBC
- Diameter of inverters: 10mm
- One microphone per earphone – handsfree ready
- Earphones charging indicator
- Playback time per charge: up to 7 h (80% volume)
- Total playback time: up to 28 hours (80% volume)
- Call time: up to 8 h
- Standby time: up to 300 h
- Earphones charging time: 1.5 h
- Case charging time: 1.5 h
- Battery capacity of one earphone: 45 mAh / 3.7 V
- Charging case battery capacity: 500 mAh / 3.7 V
- Charging port: USB-C (DC 5 V / 300 mA)
- Frequency range: 20 Hz – 20,000 Hz
- Sensitivity: 96dB +/- 3dB @ 1kHz
- Impedance: 32 Ω ± 15%
- Weight of one earphone: 3.7 g
- Charging case weight: 35.6 g
- Charging case dimensions: 61.3 × 44.9 × 26.2 mm (W × H × D)
- Package contents: TWS earphones, charging case, USB-C charging cable, user’s manual
Safety warning
Do not place sources of open flame, such as lit candles, on the device.
Dispose of batteries in an environmentally friendly manner, taking into
account the environmental impact of battery disposal.
Do not expose batteries (installed batteries) to excessive heat, such as fire.
Warning: To avoid possible hearing damage, do not listen to high volume sound for long periods of time. For safety reasons, be aware of your surroundings when using the earphones. Not suitable for children.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>