HUSKY 65536528 Glass Door Drinks Cooler Refrigerator Instruction Manual

: August 24, 2024
: Husky

Table of Contents

HUSKY 65536528 Glass Door Drinks Cooler Refrigerator
Specifications
Usage Instructions
FAQ
SAFETY INSTRUCTIONS & WARNINGS
DISPOSAL OF OLD APPLIANCES
ELECTRICAL SAFETY
HANDLING YOUR APPLIANCE
Glass Door Drinks Coolers
TO OPERATE
TEMPERATURE SELECTION
COUNTERTOP & UNDERCOUNTER RETRO REFRIGERATORS
MAINTENANCE & CLEANING
TROUBLESHOOTING
WARRANTY
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUSKY 65536528 Glass Door Drinks Cooler Refrigerator

Specifications

Product Types: Glass Door Drinks Coolers, Solid Door Fridges, Retro Refrigerators
Models: Countertop and Undercounter

Product Information

The Husky appliance is designed for household and similar applications.
It features a thermostat for temperature control located on the back (inside for undercounter models) to regulate the internal temperature.

Usage Instructions

Operating Instructions

To operate the appliance:

Locate the thermostat on the back or inside of the appliance.
Rotate the thermostat left or right to adjust the temperature. Setting 1 is the warmest, while setting 5 for countertop models or 7 for undercounter models is the coldest.
Refer to the following guide for setting the thermostat based on the season:
- Winter: Setting 1-2
- Spring and Autumn: Setting 2-4
- Summer: Setting 4-5 (Countertop); 6-7 (Undercounter)
After setting the thermostat, close the door and allow a minimum of 4 hours for the appliance to reach the desired temperature before opening it again.

Warning: Adjust the thermostat carefully to prevent beverages from freezing or glass bottles from breaking due to extremely cold temperatures.

FAQ

Q: Can children use this appliance?
A: Children should not play with or operate the appliance. Cleaning and maintenance tasks should not be performed by children without supervision.
Q: What should I do with my old appliance?
A: Before disposing of your old refrigerator or freezer, ensure there is no risk of child entrapment. Follow proper disposal guidelines as per regulations.

To ensure safe operation, please read this instruction manual thoroughly before use.

Please retain it for future reference.
Husky reserves the right due to possible changes to design to alter the instruction manual without notice.
For customer service, please call (310) 645 6400 or Email: contact@promounts.com

SAFETY INSTRUCTIONS & WARNINGS

IMPORTANT: Please read this manual before installing and switching on this appliance. The manufacturer assumes no responsibility for the incorrect installation and usage of this appliance. Please keep this manual in a safe place for future reference.

Do not use damaged appliances. If you are in any doubt, contact the manufacturer
Do not use adaptors/extension sockets when connecting the appliance to the electrical power supply
Do not allow children to play with the appliance, or to sit on it or hang it onto the door
Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision
Do not store explosive substances such as aerosol cans with a flammable propellant or other explosive or flammable material in this appliance
For safety, always clean up any spillages inside or outside of the appliance
WARNING! Do not immerse the electrical parts of this appliance in water or other liquids. Never hold the appliance under running water
WARNING! Do not obstruct or cover the ventilation openings
WARNING! Do not use mechanical devices or other means to accelerate the defrosting process
WARNING! Do not use electrical appliances inside the storage compartments of the appliance
WARNING! When positioning the appliance ensure that the supply cord is not trapped or damaged
WARNING! Do not locate multiple portable sockets, outlets or portable power supplies at the rear of the appliance
Do not plug in damaged plugs
Do not pull, twist or damage the power cable
Do not plug in or unplug the appliance with wet hands to prevent electrical shock
Bottles containing alcohol must be sealed in airtight bottles or containers to avoid spillages or fermentation
Do not cover the body or top of the appliance
WARNING! Do not damage the refrigerant circuit
WARNING! Risk of fire or explosion. Dispose of the refrigerator properly under applicable federal or local regulations
WARNING! Risk of fire or explosion due to puncture of the refrigerant tubing: follow handling instructions carefully
DANGER – Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained service personnel. Use only manufacturer-authorized service parts.
Any repair equipment used must be designed for flammable refrigerants. Follow all manufacturer repair instructions
DANGER – Risk of fire or explosion. Flammable refrigerant used. Do not use mechanical devices to defrost the refrigerator. Do not puncture refrigerant tubing.

WARNING: THE METAL RAILS ON THE EXTERNAL UNDERNEATH OF THIS APPLIANCE MAY HAVE SHARP EDGES, SO ALWAYS UNPACK AND HANDLE WITH CARE.
DO NOT DRAG THE APPLIANCE: PLACE IT CAREFULLY IN POSITION TO AVOID SCRATCHING OF SURFACES.

DISPOSAL OF OLD APPLIANCES

BE SURE TO MAKE ANY LOCKS UNUSABLE. IF POSSIBLE, REMOVE THE DOOR(S) AND DISCARD SEPARATELY.
WARNING – CHEMICAL HAZARD: DO NOT ALLOW CHILDREN TO PLAY WITH THE OLD APPLIANCE. CONTACT YOUR LOCAL AUTHORITY FOR PROPER DISPOSAL PROCEDURES.
Before disposing of an old appliance, please make sure it is switched off and safe. Unplug the appliance and break any locks in order to avoid children becoming trapped.
Please note: the cooling system contains gases and refrigerants which require specialist waste disposal.
Contact your local waste disposal depot for proper disposal of an old appliance and contact your local authority if you have any questions.
Please ensure the pipework of your appliance is not damaged before disposal.

WARNING: Risk of child entrapment. Before you throw away your old refrigerator or freezer:

Take off doors
Leave the shelves in place so that children may not easily climb inside

DISPOSAL OF PACKAGING

All the packaging materials with your appliance may be disposed of without danger to the environment.
The cardboard carton and polythene wrappers are recyclable – check with your local authority for the best recycling options. The expanded polystyrene materials included in the packaging can be placed in general waste.

ELECTRICAL SAFETY

THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET.
Before switching on, make sure that the voltage of your electricity supply is the same as that on the rating plate. This appliance is designed to operate on 110-120V/60Hz.
Connection to any other power source may damage the appliance
This appliance may be fitted with a non-rewireable plug. If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until a suitable replacement is found
If the plug has to be changed, because it not suitable for your socket or becomes damaged in any way, it should be replaced by a qualified electrician. The plug removed must be disposed of safely as insertion into a 13 Amp socket could cause an electrical hazard
Always remember to unplug your appliance before cleaning.

HOW TO MINIMISE THE ENERGY CONSUMPTION OF YOUR HUSKY APPLIANCE

Energy consumption will be lower if the appliance stands in a well-ventilated space and in particular, if the vent at the back of the appliance is clear of obstruction
Do not place the appliance in direct sunlight or near a heat source such as ovens, radiators, heaters, etc as this will increase energy consumption
Keep the door closed as much as possible
Setting the thermostat cooler (towards the highest number on the dial) means higher energy consumption, so set only as cool as you really require
Do not overfill the appliance – overfilling means the cool air cannot circulate freely inside the cabinet which may slow the process of cooling and make the cabinet less efficient
Defrost the appliance if frost can be seen building up inside – frost will increase energy consumption and make the cooling process slower (see section ‘Defrosting’)
Turn the appliance off completely if it is not required for days or longer to avoid wasting energy (see also section ‘When not in use’).

HANDLING YOUR APPLIANCE

This appliance uses R600a (Isobutane) natural refrigerant gas as part of its cooling system.
R600a is environmentally friendly but can be combustible. Care should therefore be taken when handling or transporting the product to ensure that none of the refrigeration circuit components are damaged.
To lift the appliance safely, tilt it backward by no more than 45 degrees, and hold the base and rear corners of the appliance carefully. Never use the door handles for lifting.
To move the appliance on a flat-level surface, please note the warning on page 3 to avoid damaging your surface.
This appliance is heavy and could cause injury. Ensure there are adequate people present to move the appliance.

POSITIONING YOUR APPLIANCE

Ensure that the appliance is situated:
Away from direct sunlight and in a dry and well-ventilated space
Away from stoves, ovens, radiators, and any other heating appliances
With a recommendation of at least 15cm clearance around the appliance
Do not position the appliance in conservatories or outbuildings with extremely high or low ambient temperatures
Do not use it outdoors or leave in the rain
Do not place anything on your appliance
The appliance must be used in the vertical position and stand on an even, flat surface for quieter operation
If your appliance is to be placed on carpet, support it with a wooden board underneath. Be aware that placing the appliance on the carpet may mean that heat from the compressor may cause the carpet to fade
Ensure that the plug is easily accessible.

STORING FOOD

Glassdoor drink coolers are not suitable for the storage of fresh food or perishable drinks.
To avoid contamination of food, please respect the following instructions:
Opening the door for long periods can cause a significant increase in the temperature in the compartments of the appliance
Clean regularly surfaces that can come in contact with food and accessible drainage systems
Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food
If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.

THIS APPLIANCE IS INTENDED TO BE USED IN HOUSEHOLD AND SIMILAR APPLICATIONS SUCH AS

Staff kitchen areas in shops, offices, and other working environments
Farmhouses and by clients in hotels, motels, and other residential-type environments
Bed and breakfast-type environments
Catering and similar non-retail applications

Glass Door Drinks Coolers

Glass Door Drinks Coolers: Countertop and Undercounter

SPECIFICATIONS

This appliance is a cellar compartment for the storage of non-perishable beverages. It is not suitable for the storage of fresh food or perishable drinks
It is intended strictly for domestic indoor use.

Please note only on certain models.

Solid Door Fridges: Countertop and Undercounter

This appliance is intended strictly for domestic indoor use.
Please note only on certain models.

Retro Refrigerators: Countertop and Undercounter

This appliance is intended strictly for domestic indoor use.

TO OPERATE

When the appliance has been positioned, adjust the feet to ensure the unit is stable.
This is essential to ensure quiet running and proper door opening/closing
Ensure that the appliance is not connected to the power and clean the interior compartment following the instructions
Remove all transportation tapes
CONNECT TO THE ELECTRICAL SOCKET BUT DO NOT SWITCH
ON THE POWER FOR AT LEAST 4 HOURS. The coolant within the product needs time to settle after it has been transported and put into position. Failure to do this will affect the cooling performance of your appliance
Follow the instructions below to adjust the thermostat to the required temperature.
Leaving the thermostat at 0 will mean that the appliance will not start operating
There may be an odor when you first switch on the appliance, it will disappear as it starts to cool
The following sounds are perfectly normal:
Faint gurgling or bubbling sounds as the refrigerant is pumped to the cooling system
A slight whirring or pulsating noise as the compressor is working
A slight click as the thermostat cycles in and out and controls the compressor
After the appliance has been unplugged, leave for three minutes before plugging it in again.

TEMPERATURE SELECTION

The thermostat situated on the back (inside for undercounter models) of your appliance controls the temperature within the appliance. This can be rotated left or right to regulate the temperature.
On the thermostat, 1 is the warmest setting and 5 on countertop or 7 on undercounter models is the coldest.
The thermostat should be adjusted according to the amount of product in the appliance and the ambient temperature. The guide for setting the thermostat is as follows:
- Winter — Setting 1-2
- Spring and Autumn — Setting 2-4
- Summer — Setting 4-5 (Countertop); 6-7 (Undercounter)
Once the temperature control has been set, close the door. Do not open the door again for a minimum of 4 hours to allow the appliance to reach the required temperature.

WARNING: If the thermostat is set to too cold a setting, beverages may become frozen. In extreme circumstances, glass bottles may even break. Always exercise caution when setting the temperature.

SETTING THE THERMOSTAT – COUNTERTOP MODELS
The controller is positioned on the external back wall of the appliance. The settings 1 (MIN) – 5 (MAX) regulate the interior temperature.

Setting 1 (or MIN) = lowest setting (warmest internal temperature)
Setting 5 (or MAX) = highest setting (coldest internal temperature).

SETTING THE THERMOSTAT – UNDERCOUNTER MODELS
The controller is positioned on the interior side wall of the appliance. The thermostat “0” position indicates the appliance is turned off although power is still connected. By turning the thermostat dial clockwise, the appliance will turn on automatically.
The settings 1
(MIN) – 7 (MAX) regulate the interior temperature of the appliance.

Setting 0 = Off (not operating)
Setting 1 (or MIN) = lowest setting (warmest internal temperature)
Setting 7 (or MAX) = highest setting (coldest internal temperature).

CHANGING THE LED LIGHT BULB (where applicable)
Before removing the light bulb, you must unplug the appliance. Failure to do so may result in electrical shock or personal injury.

Remove the light bulb cover (1) by gently removing the screw (3)
Unscrew the bulb (2) Fit a 1w E14 LED bulb that is the same shape and size
IMPORTANT: replace the light cover to its original position.

DOOR REVERSAL
The door can be opened from left to right and vice versa. Should you wish to change the opening direction, please follow these instructions.
Note: all parts removed should be kept safely. you will require these for the reinstallation of the door.
Disconnect the appliance from the power supply. Never tilt the fridge more than 45° during this process and do not lay the fridge on its side.

COUNTERTOP AND UNDERCOUNTER GLASS DOOR AND SOLID DOOR APPLIANCES

Remove the two screws (1) that hold the upper hinge (5)(right side) to the frame
Lift the door off and place on a padded surface to prevent scratching
Remove the blanking plug (8) from the hole in the upper left corner of the door and transfer it to the uncovered hole on the upper right corner. Press firmly to secure it
Remove the two screws (6) that hold the lower hinge (2)
Remove the adjustable front left foot and transfer it to the other side
Remove the bolt pin(7) from the lower hinge (2) and reverse the direction of the lower hinge. Secure the lower hinge (2) to the left side of the lower frame with the two screws (6) Re-insert the bolt pin (7). Set the door into position, making sure it is seated comfortably onto the lower hinge (2)
Holding the door closed, secure the upper hinge (5) into the top frame with the two screws (1). Check the door is level and tighten the screws firmly.

Check that the door opens and shuts correctly after you have completed the door reversal process. The appliance must now be upright for a minimum of 3 hours before switching on again.

COUNTERTOP & UNDERCOUNTER RETRO REFRIGERATORS

Support the door from the bottom
Remove the six screws that affix the hinges and two spacers to the cabinet frame
Place the door flat on a padded surface to prevent scratching
Remove the six hinge screws that affix the hinges to the Retro door
Remove the blanking plugs from the opposite side and use to plug the holes exposed by the removal of the hinge
Screw the hinges onto the opposite side of the door
Pick the door up and carefully align with the cabinet holes
Screw the remaining six screws into both hinges and the two spacers into the cabinet to secure the door.

Check that the door opens and shuts correctly after you have completed the door reversal process. The appliance must now be upright for a minimum of 3 hours before switching on again.

MAINTENANCE & CLEANING

Disconnect the appliance from the power before cleaning. Always reconnect the plug with dry hands. Never pour water over the appliance.

Interior Cleaning

Wash the interior with warm water and neutral detergent such as bicarbonate of soda (5ml to 0.5 litres of water)
Do not use abrasive products, detergents or soaps
Dry all surfaces thoroughly.

Exterior Cleaning

Wash the outer cabinet including the back and bottom of the appliance with warm soapy water
Do NOT use abrasive products as this can damage the finish
There are sharp edges on the underside of the product as always take care when handling the appliance
Once or twice a year dust the compressor at the back of the appliance with a brush or vacuum cleaner to maintain efficient performance
Dry all surfaces thoroughly.

WHEN YOUR APPLIANCE IS NOT IN USE
If the appliance is not being used for long periods:

Unplug your appliance
Clean and dry the inside of the appliance. Leave the door slightly open to allow it to dry completely
An appliance which is unused without being cleaned may start to smell musty or develop mildew.

DEFROSTING

The surface of the evaporator ices up when the appliance is working normally. It can also occur when the door has been left open or the thermostat has been set too high.

If the frost layer is more than 3mm/1⁄8″ thick, the appliance must be defrosted and cleaned to avoid unnecessary energy consumption and inefficient operation.

Remove all items inside and unplug the appliance.
After defrosting, clean the appliance (see instructions above) and allow it to dry.

POWER FAILURE

If a power cut occurs, do not open the door more often than necessary in order to conserve cold air.

TROUBLESHOOTING

Before returning your appliance to where you purchased it from, check the following points as you may be able to solve any problem yourself.

Problem	Solution
The appliance does not work	• Check that the appliance is turned on

and thermostat is not set at 0

• Check power cable is plugged in and that the fuse has not blown

• Check that the voltage is correct for the appliance

• Try a different socket which is known to work.

The temperature is not cold enough| • Check power cable is connected and that the fuse has not blown

• The wrong temperature selected. Adjust setting on the thermostat (see page 10)

• The appliance is overfilled

• Appliance exposed to direct sunlight or heat source

• The door is being opened too often or the door gasket is damaged

• Check that the ambient temperature is within the operational limits of the appliance.

Internal temperature too high or low| • Check thermostat – is it set too high or low?

• The correct clearances are at the sides/back

• The door is not being opened too often

• The door is not closing completely.

Unusual noises or noisy operation| • Check that the appliance is on a flat, level surface and is stable

• Check the clearance around the appliance and that it is not touching any other items

• Bubbling and gurgling sound: This noise is NORMAL and is emitted as the coolant fluid flows through the pipes within the system

• Water flowing sound: This is the NORMAL sound of water flowing into the drain trough during the defrosting process

• Noisy operation: Compressor noise is NORMAL when the compressor is being energised.

Outer surfaces are wet| • Water source or leak too near the appliance – dry surfaces thoroughly and move the appliance

• Inner surfaces are wet

• Caused by condensation – dry the inside of the appliance

• Door opened too often or kept open too often.

Inner surfaces are wet| • Caused by condensation – dry the inside of the appliance

• Door is opened too often or kept open too long.

Standing water inside or on the floor/worktop| • Check if the evaporation tray is full and empty it if required.
Smell/odour| • Check the fridge contents

• Check for spillages inside the appliance. Remove shelves and drawers to check prior spills have been cleaned up.

The doors do not close properly| • Ensure there are no obstructions preventing door closure

• Check that the door compartments and shelves are correctly in place

• Check that the door seal is not warped or damaged

• Check that the appliance is level.