BUXTON BHP 9800 Wireless Stereo Headphones User Manual

: June 9, 2024
: BUXTON

Table of Contents

Supply content
Product Overview
Putting into operation
Bluetooth
ANC function
Audio AUX IN
Charging
Technical specifications
DISPOSAL OF DISCARDED ELECTRICAL AND ELECTRONIC EQUIPMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BUXTON BHP 9800 Wireless Stereo Headphones User Manual

Supply content

A) 1× Headphones
B) 1× Audio jack 3.5 mm
C) 1× User’s manual
D) 1× USB-C charging cable

Product Overview

LED battery charge indicator
USB-C charging connector
Sliding switch ANC (on/off) – suppression of ambient noise
Volume up button (press 1×)
- Next track (long press)
On/Off button (long press)
- Play/pause (press 1×)
- Answer/end call (press 1×) / reject call (long press)
- Redial – repeat last call (press 2×)
- SIRI/Google Assistant (press 3×)
Volume down button (press 1× ) previous track (long press)
Socket for audio AUX IN mini jack (3.5 mm)
Microphone location
LED indicator ANC, pairing, headphone on/of

L Left earpiece – left audio channel
R Right earpiece – right audio chann

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
Before first use, charge the headphones to the maximum level.

Turning on the headphones – press and hold the “on/off” button and wait for the headphones to announce the “BUXTON” greeting.

Turning off the headphones – press and hold the “on/off” button and wait for the headphones to announce “SEE YOU”.

Warning: To prevent damage to your hearing, always keep the volume level of your device to a minimum before connecting BT headphones to your mobile device.

Remark: The BT headphones will turn off after a longer period of inactivity unless they are paired to another device.

Bluetooth

The headphones are equipped with a twochannel BT module. This means that it is possible to have headphones connected to two devices at the same time. The audio signal will come from the last connected device until there is a state change in the other device (for example, an incoming call). The audio signal source used will then be replaced by a second audio signal source. You cannot operate both audio signals simultaneously.

To pair the BT earphones with mobile device, do the following:
Turn on the BT speaker and search for its Bluetooth name “BHP 9800” on the device to which you wish to pair and start the pairing process. If you are asked to enter a pairing code when pairing your device and BT headphones, use the code: “0000”.
To cancel pairing, disconnect the BT headphones (cancel Bluetooth pairing) on your mobile device.

Note: To ensure a stable Bluetooth connection, keep a distance of up to 10 metres between the BT headphones and the paired device. Depending on ambient interference, in some cases it may be necessary to maintain a shorter distance between the BT headphones and the paired device.

ANC function

The ANC function is switched on to suppress ambient noise. The on state is indicated by a green LED. When listening to music with ANC on, the battery consumption is higher.

Warning: If you are not using the headphones, make sure that the ANC function is switched off (the green LED is not lit). When the headphones are switched off and the ANC function is switched on, the battery is discharged. If you are in an unfamiliar environment, do not use the ANC function to avoid injury.

Audio AUX IN

The headphones are equipped with a 3.5 mm audio jack. Your device can be connected to the BT headphones using the audio cable included in the box with the headphones. First connect the audio jack to your device and then to the socket on your BT headphones.

Warning: Before connecting your device and BT headset, make sure that the output signal from your device is at the minimum level (minimum output volume). This will prevent the BT headphones from damage.

Charging

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. Charging of the BT headphones will be indicated by a red LED. A fully charged battery will be indicated by a blue LED until the charging adapter is disconnected.

Warning: For charging, use only the original accessories supplied with the appliance. To maximize battery life, it is advisable to start charging the battery only after a low battery condition (10–20%) has been reported. Charge continuously until fully charged. If the battery life is already very short, it is exhausted and we recommend you contact an authorised service centre for more information.

Recommendation: A low battery is first reported at 20% and then at 10%.

We recommend that you start charging to full level at the first sign of a low battery.

Recommendation: If your earphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months.

Technical specifications

ANC – Active Noise Cancellation
Noise reduction depth: 23 dB +/- 3 dB
ANC function indicator
SIRI assistant
Bluetooth: V 5.0
BT connection range: 15m
BT profiles: A2DP 1.3, AVRCP 1.6, HFP 1.7, HSP 1.2
Max. transmission power of BT: 100mW @ 2.4 Ghz – 2.4835 GHz
Chipset: Actions ATS3015
Codec: AAC, SBC
Diameter of inverters: 40mm
Operation: 4 multifunction buttons
Integrated microphone: (Microphone works only in wireless mode) 3.5 mm stereo connector
Playback time: up to 22 h (50% volume)
Playback time: up to 19 h (100% volume)
Playback time with ANC: up to 15 h (50% volume)
Playback time with ANC: up to 9 h (100% volume)
Call time: up to 22 h
Standby time: up to 300 h
Charging time: ≤ 2 h
Rechargeable battery: 300 mAh / 3.7 V Li-Pol
Charging port: USB-C (DC 5V/300mA)
Earphones charging indicator
Frequency range: 20 Hz – 20,000 Hz
Sensitivity: 97dB +/- 3dB @ 1kHz
Impedance: 32 Ω ± 15%
Weight: 255g
Dimensions: 170 × 192 × 85mm (W × H × D)
Package contents: headphones, protective case, USB-C charging cable, 3.5 mm JackJack cable, user manual

DISPOSAL OF DISCARDED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on the product, accessory or packaging indicates that the product must not be treated as normal household waste. Please dispose of this product in a collection yard designated for the recycling of electrical and electronic equipment. In some EU countries or in some European countries, you can return your products to your local retailer when you buy an equivalent new product. Correct disposal of this product helps save valuable natural resources and prevents possible adverse impacts on the environment and human health that might be caused by improper waste disposal. For further information, please contact your local authorities or the nearest waste disposal collection centre. Improper disposal of this type of waste may lead to penalties under the law.

For companies in the European Union
If you need to dispose of electrical or electronic equipment, ask your dealer or supplier for the necessary information.

Disposal in countries outside the European Union

If you wish to dispose of this product, please ask your local authorities or your dealer for the information necessary for the correct disposal method.

This product complies with all relevant EU basic regulatory requirements.

Changes in the text, design and technical specifications may be made without prior notice and we reserve the right to make such changes.

FAST ČR, a. s. hereby declares that the radio equipment type BHP 9800 complies with Directive 2014/53/EU.

The complete version of the EU Declaration of Conformity can be found at: www.buxton.eu.
Manufacturer: FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic

Service coordinator for the Czech Republic:
FAST ČR, a.s., U Sanitasu 1621, Říčany 251 01, Czech Republic; phone: 323,204,120
FAST ČR, a.s., Cejl 31, Brno 602 00, Czech Republic; phone: 531,010,295