veho VHS-007-E27 Cave Wireless Smart Blub User Manual
- June 6, 2024
- veho
Table of Contents
veho VHS-007-E27 Cave Wireless Smart Blub User Manual
Bulb Installation & Pairing
STEP 1
Insert the Cave Bulb into a compatible socket, then switch on the power. The bulb should begin to flash immediately, indicating that pairing mode has been activated.
STEP 2
Open the Cave app and go to ‘System Settings’, select ‘Add Accessories’.
STEP 3
Use ‘Learn Mode’ and select ‘Wi-Fi Bulb’, press ‘Start Learning’
STEP 4
Click ‘Next’
STEP 5
Confirm your wireless network. Pairing process may take up to 60 seconds
STEP 6
You can only pair one accessory at a time using Learn Mode.
Controlling the Bulb
STEP 1
Open ‘System Settings’ and select ‘Wi-Fi Bulb’. Bulbs are displayed individually, tap on a bulb icon to turn on/off.
STEP 2
Edit the colour and brightness by tapping the coloured circles icon.
STEP 3
Remove a bulb from the system by selecting the bulb and clicking the pencil icon. Select ‘Delete’.
Automated Tasks
To set automated tasks, open the Cave app, visit ‘System Settings’ and select ‘Widgets’. Tap the ‘+’ icon, then edit the automated task settings before confirming the task.
Specifications
- Working voltage: 110V-240v 50/60Hz
- Effect: 8W (60W)
- Connection mode: Wi-Fi 2.4GHz 802.11b/gn
- Size: A60 E27
- Luminous flux: 800LM @ 2700K
- LED colour: RGB + W
- Colour temperature: 2700K
- Working temperature: -25°C – 45°C
- Weight: 100.0g
- Dimensions: Ø60*110mm
- Usage: Indoor use only
- Dimmable: Yes
Support : Contact Veho for support or troubleshooting for your Cave Wireless Smart Bulb visit veho-world.com
Other Cave accessories
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>